- (1) Rockford Fosgate PM300X1 300 Watt RMS Monoblock Marine/Boat Amplifier Punch Amp
- (1) Rockville MS12LW 12" 2800 Watt White Marine/Boat 12" Free Air Subwoofer w/ LED's
- (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Description of PM300X1:
The PM300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.
Features:
- Rockford Fosgate PM300X1 300 Watt RMS Monoblock Marine/Boat Amplifier Punch Amp
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specifications:
- CEA-2006 Compliant: 200W x 1 @ 4Ω ≤1.0% THD+N
- Number of Channels: 1
- Rated Power (RMS Continuous Power):
- 200 Watts x 1 @ 4-Ohm
- 300 Watts x 1 @ 2-Ohm
- Total Power (Sum of Rated Power): 300 Watts
- Dynamic Power (PVC/PowerCube):
- 260 Watts x 1 @ 4-Ohms 0° Res
- 444 Watts x 1 @ 2-Ohms 0° Res
- Bridgeable: No
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Efficiency (average): 74% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%; 2-Ohm: <1.0%
- Crossover Controls:
- High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
- Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
- All-Pass: Yes
- Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Function depends upon LP/AP/HP switch position
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low level: 1 RCA pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 8 AWG to 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED
- Input Clip LED
- Output Clip LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 50 A
- Max. Current Draw (13.8V Sinewave): 45 A
- Average Current Draw (13.8V Music): 23 A
- Suggested Alternator: 75 A
- Shipping Weight: 9.5 lbs. (4.30 Kg.)
- Dimensions (H x W x D): 2.38" x 7.76" x 9.86" (6.05 x 19.71 x 25.04 cm)
Video of MS12LW:
Description:
The MS12LW is one of the most powerful marine subwoofers on the market. What really makes this sub stand out is the sound quality and durability. It goes so loud that if you crank it up, boats that are thousands of feet away can feel the bass. The frequency range of these subs are so good that it will make all your songs sound so much better! These play frequencies that normal full range speakers cannot hit, adding depth and richness to all your music.
The MS12LW is 2,800 watts peak, 1,400 watts Program RMS and 700 watts CEA Rated! This sub is CEA-2031 compliant, which makes it easy to compare this subwoofer to other CEA compliant subs on the market. The issue in the marine audio world is that there are so many different brands with different standards on how they rate their products. We want to make it easy for you to compare our products to any brands on the market, therefore we provided all 3 ratings for you to do so. The CEA compliant rating, which you should use to compare this to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supply a program RMS rating that has become standard for many good brands in the industry such as Hifonics, Earthquake, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the sub can handle for a short burst.
This subwoofer has a double-stacked 100 Oz magnet! They are twice as large as almost any other marine sub on the market, which is why these can handle so much power. In addition, the MS12LW has a fantastic sensitivity rating at 90dB, which means even if you have a smaller amplifier, the subwoofer is sensitive enough that it will still sound great.
The MS12LW was designed in a molded ABS plastic basket that is made with a special blend that is waterproof and un-breakable. You can literally jump on it and hit it with a sledgehammer without it breaking!
Using only true marine grade components and materials, the Rockville MS12LW subwoofers are fully marinized against salt & fresh water conditions. These subs are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. These subwoofers also come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Features:
- Rockville MS12LW 12" Marine Free Air Subwoofer with LED's
- Free air subwoofer does not require any enclosure
- Max Power: 2800 Watts
- RMS Program Power: 1400 Watts
- RMS Power: 700 Watts
- Polypropylene cone with Rubber edge
- 2.0" 4 Layer dual voice coil
- Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend)
- Magnet: 100 Oz double stacked magnet
- Frequency response: 20Hz-4Khz
- Impedance: Dual 4 Ohm
- Sensitivity: 90dB
- Total diameter: 12.8"
- Cutout diameter: 11"
- Mounting depth: 6.1"
Specifications:
- Free Air Resonance (Fs): 25.82 Hz
- Electrical “Q” (Qes): 0.5402
- Mechanical “Q” (Qms): 3.334
- Total Speaker “Q” (Qts): 0.4649
- Equivalent Compliance (Vas): 4.19 cu ft / 118.67 L
- One-Way Linear Excursion (Xmax): 0.41 in / 10.5 mm
- Reference Efficiency (No): 0.36%
- Efficiency (1 W / 1 m): 88 dB SPL
- Effective Piston Area (Sd): 79.2 sq in / 0.0511 sq m
- DC Resistance (Re): 3.4 Ohms
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
Video of RMWK:
Features:
- Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1 50A Mini-AGU Fuse
- 2 Rust Resistant Ring Terminals
- 2 Rust Resistant Spade Terminals
- 5 Rust Resistant Speaker Cable Terminals
- 1 Rust Resistant Washer
- 10 White Cable Ties
Owner's manual
- UPC:
- 613815913207
