Package Includes:

• (1) Novation Peak Eight-Voice Desktop MIDI USB Polyphonic Synthesiser For MAC or PC
• (1) Novation CIRCUIT Groove Box Music Controller Pad/Drum Machine+Ableton Live Lite
• (1) Rockville DPM8B 8" 2-Way 300W Black Active/Powered Studio Monitor Speaker
• (2) Rockville RHTSB 36" Inch Surround Sound Home Theater Speaker Stands
• (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
• (1) Samson SR850 Professional Semi-open Studio Reference Monitoring Headphones

---

Authorized Novation Dealer!

Eight-voice polyphonic synthesizer
Peak sounds warm and rich with filthy, biting overdrive. It’s an eight-voice desktop polyphonic synthesiser with three New Oxford Oscillators for each voice. The synth has a resonant multi-mode analogue filter for each voice, and three distortion points in an analogue signal chain.

Analogue where it matters – digital where it counts
Peak’s design consultant was none other than Chris Huggett, the man behind Bass Station, Supernova, OSCar and many more legendary synths. Peak has its origin in the Bass Station II analogue monosynth, and Peak’s oscillators sound completely analogue by being high-quality NCOs (Numerically-Controlled Oscillators), but gain the flexibility of the digital domain with 17 digital wavetables.

Build and refine new sounds from scratch
Broaden out your electronic music, draw in new influences and take artistic risks. The modulation system puts the most frequently used assignments right at your fingertips in the main controls. More elaborate movements and secondary ‘via’ assignments are made just a few menu button presses away.

Connect to just about anything
You can plug Peak into your Mac or PC via USB and start playing. It also has MIDI I/O on five-pin DIN ports, so you can connect your other MIDI gear. Oh, and did we mention it connects to modular systems via a CV modulation input?

Features:

• Novation Peak Eight-Voice Desktop MIDI USB Polyphonic Synthesiser For MAC or PC
• Two ways to create waveforms - Analogue-sounding NCOs (Numerically-Controlled Oscillators) and 17 digital wavetables.
  
• A colossal amount of distortion - Three distortion points for each voice – pre-filter, post-filter and global – in an analogue signal chain.
  
• Control expression - Peak is capable of receiving polyphonic aftertouch, which puts expression right at your fingertips.
  
• Cross-modulate oscillators - The three New Oxford Oscillators for each voice can become a linear FM source using either the analogue-sounding NCOs (Numerically-Controlled Oscillators) or digital wavetables. They are also able to cross-modulate in a recursive loop.
  
• Huge modulation system - 16-slot modulation matrix and 16 direct assignments controlled from the front panel, cleverly arranged for intuitive patch design and sound editing. Three ADSR envelopes and two LFOs for each voice.
  
• Easily switch modulations - Two animate buttons give live performers instant one-touch transformation of patches.
• Mind-blowing sounds on-board - Reverb, delay and chorus at your disposal, and there’s also an arpeggiator.
  
• Connect to hardware and software - Connect and sync to your music software and MIDI-compatible hardware. CV modulation input used to slot together modular systems.
  
• Store unlimited sounds - Keep as many patches as you like on your Mac or PC using the Components software. Learn more about Components here.
  

Specifications:

• 42 Control knobs
  
• 8 35mm Sliders
  
• 1Volume knob
  
• 2 Data encoders
  
• Rubberised knob caps with spun metal discs
  
• 30 Function buttons (not lit)
  
• 16 Function buttons (lit)
  
• 2 Animate buttons plus hold button
  
• 90 Indicator LEDs
  
• OLED display
  
• Kensington Security Slot
  
• Power switch
  
• Power supply connector
  
• USB socket
  
• MIDI In / Out / Thru
  
• 2 1/4" jack socket for continuous or switched pedals
  
• 3.5mm jack socket for CV in
  
• 1/4" jack sockets for left and right outputs
  
• 1/4" jack socket for headphone output
  
• Metal chassis with wooden end cheeks
  
• Metal magnetic inset end pieces
  
• Synth Engine:
  
• 8 note polyphony (dependent on voices used per note)
  
• Mono-Timbral
  
• Per voice:
  
• 3 oscillators
  
• 1 noise generator
  
• 1 ring modulator
  
• 2 LFOs
  
• 1 Amp envelope and 2 mod envelopes
  
• 1 Filter
  
• Waveforms include:
  
• Sine, tri, sawtooth, square / pulse plus 17 wavetables of 5 waveforms per row
  
• Filter:
  
• 1x State variable OTA filter per voice
  
• 12/24dB slope
  
• Low-pass / band-pass / high-pass
  
• Pre-filter overdrive
  
• Post-filter distortion
  
• Modulation:
  
• 16 modulation slots per patch
  
• Each slot has 2 sources to 1 destination
  
• Mod sources (17):
  
• Direct (depth)
  
• Modulation wheel
  

---

Authorized Novation Dealer!

Videos of CIRCUIT:

Description:

Circuit is designed to inspire. Two Novation polysynths and a four-part drum machine, combined with an intuitive grid-based sequencer in a standalone box that will have you making electronic music in minutes. Hit some pads, tweak the knobs and your track will start to emerge, all locked in time and key. Play around with effects, patterns and sounds in real time, to produce your track, brimming with fat grooves and beats.

All You Need To Make Music - Anywhere
Compact and battery powered with a powerful built-in speaker, Circuit can be used to make music entirely on its own. In the studio it will work alongside your standalone synth gear and run in sync with your music software too. Circuit is all you need to inspire, create and play new tunes

Build Ideas Quickly
Embrace a new way to make music. Circuit's split grid shows your steps and notes at the same time, so you can sequence and play while seeing exactly what's going on. Build up your parts quickly and easily, either by programming each step or capturing your performance in real-time.

Ideas in Seconds. Tracks in Minutes
Circuit inspires, straight out the box. It combines a 2-part synthesiser and a 4-part drum machine with a 4x8 RGB velocity-sensitive grid sequencer, which will have you finding new musical directions and creating electronic grooves in no time.

Cutting Edge Sound
Building on our true Nova heritage, Circuit delivers cutting-edge sound with production-ready monophonic and polyphonic patches and tons of character for easily creating deep bass lines, epic leads and warm pads.

Combine Simplicity and Experimentation
Use simple streamlined modes to keep your harmonies, rhythms and melodies locked in time and key while you make riffs, hooks and chords. Or start experimenting for some serious sequencing exploration.

Stand Alone
Compact and battery-powered, Circuit truly stands alone. You can create entire tunes from scratch without a laptop, then save them and play them back live. You don’t even need speakers, because it has one built in. Of course, Circuit will plug in to your sound system and work with your computer and other synth gear too, via its Line Outs, USB and MIDI ports.

Looking for the Perfect Beat?
Velocity sensitive RGB pads let you quickly build expressive drum beats, by step sequencing or playing the wide range of drum sounds. Define your sound with total control over pitch, decay, distortion and EQ.

Build Whole Tunes with Effects
Create an entire tune by combining up to 128 steps of synth and drum patterns, then adding space, depth and energy to your music with built-in effects. Sidechain your synths to the kick drum to get them to pump. When you’re done, save your tune to one of 32 slots.

Easily Tweak Your Sound
Sculpt your sound using eight macro knobs allowing you to subtly tweak or completely transform each patch. Then add movement and rhythm by recording or sequencing your performance.

Circuit Components
Supported by an online suite of tools that is constantly evolving, take advantage of regular updates and new functionality to customise your Circuit. For example, simply drag and drop samples onto Circuit with Sample Import, using the streamlined browser-based Web MIDI workflow, and create your own sound library.

Features:

• Novation CIRCUIT Groove Box Music Controller Pad/Drum Machine+Ableton Live Lite
  
• A powerful electronic music workstation with Nova-series synth engines and sequencing
• Comprehensive RGB-backlit 4 x 8 pad matrix makes playing and sequencing intuitive
• 2-part Nova-series analog-modeled synthesizer with 64 presets delivers amazing sound
• 4-part rhythm machine lets you lay down beats and create compelling drum sequences
• Perform live with or without real-time quantization or step sequence on a detailed grid layout
• Lock your synths to a specific key to quickly create music without worrying about wrong notes
  
• Store your creations in 32 slots for performance and easy recall
• Battery power and built-in speaker let you create and perform music anywhere
• USB and MIDI connections provide compatibility with the rest of your electronic music gear
• Includes Ableton Live Lite and 1GB of Loopmasters sounds and samples
• Product Hardware
• 32 RGB backlit velocity sensitive button grid
  
• 28 RGB backlit function buttons
  
• 8 Continuous pots with RGB indicator LEDs
  
• Dedicated filter and volume pots
  
• 1/4" jack sockets for left and right outputs
  
• Two MIDI sockets (3.5mm jack sockets with MIDI din

---

 

Video of DPM8B:

Description:

The Rockville DPM8 Active/Powered Studio Monitor Speaker is a step-up version of our popular APM series. These speakers are sold individually and each speaker is bi-amped which means it has one amp for the highs, and another for the lows. These speakers have 300 watts of peak output power and 150 watts RMS. These sound better than the famous brand studio monitors. They have a flat frequency curve making these the perfect studio monitors.  The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.

Description of the Enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.

Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes: painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. Baking paint is long lasting and is the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color and design to make sure it is not only beautiful, but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very clean and modern. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.

Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know the brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.

For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters with metal grill protection. If you are an audiophile, I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.

We use a 8” woofer that will out-perform a regular 8” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids — basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies, which in turn allows the speaker to be louder without distorting. We use very high-grade crossover filters in our speakers. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!

Added Benefits:
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat, than your speaker can handle more power!

Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound clearer, and at the same time it protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!

Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The Volume, High Pass filter and Low Pass filter controls are all found on the rear of the unit. The DPM8 has all your standard studio inputs and outputs such as a ¼” TRS and XLR balanced input jacks, and RCA input.

Features:

• Rockville DPM8B 8" 2-Way 300W Active/Powered Studio Monitor Speaker in Black (sold individually)
  
• Peak Power: 300 Watt
  
• RMS Power: 150 Watt
  
• Bi-Amped: 45 Watts for highs, and 105 watts for the lows
  
• Enclosure is made of top quality MDF wood. Our enclosure is not particle board; it is true high-grade MDF! The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
  
• We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
  
• Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room

Owner's Manual

---

Video of RHTSC:

The Rockville RHTSC high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!

Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands. 

With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on. 

In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.

Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence! 

Includes:

• 8 Isolation pads
  
• 8 Brass spikes
  
• 8 Rubber spikes
  
• 4 Cable clips
  
• 4 Cable ties
  
• 16 Screws
  

Features of RHTSC:

• (2) Rockville RHTSC 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
• Pair Rockville RHTSC high performance wood speaker stands
  
• Finished with premium furniture-grade paint that will not crack, chip, or peel.
  
• Made from high quality medium density fiber core to minimize resonance
  
• Brass & Rubber spikes add stability to any floor surface
  
• Isolation pads create a no-slip surface as well as improve acoustical performance
  
• Empty body design allows you to add sand in order to increase the weight of the stands if needed
  
• 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
  

Specifications:

• Stands Height: 36"
  
• Base plate size: 11.8" 9.25"
  
• Top Platform size: 9.25" 7.28" (For smaller size speakers)
• Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8")
  
• Item Load weight capacity: 60 lbs.
  
• Item weight per pair 25 lbs.
  
• Shipping weight 29 lbs.
  
• Color: Classic
  
• Shipping dimensions 36” x 11.4” x 9.25”
  
• Product dimension 11.8” x 9.25” x 36”  

Owner’s Manual

---

About Rockville Quality Control Procedures: 
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.

---

Video of RRS190S:

Authorized Rockville Dealer!

Description:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam
• 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
  
• Price is for (2) pads which accommodates (2) speakers

---

Authorized Samson Dealer! 

Hear the Difference
Samson’s SR850 Semi-Open-Back Studio Headphones offer an outstanding listening solution for musicians, sound engineers and general music enthusiasts alike. With solid bass response, ultra-clear highs and a over-ear design, the SR850s ensure complete comfort and accurate headphone monitoring.

These headphones offer an semi-open-back design for enhanced ambient listening environment, allowing appropriate bleed for better stereo imaging and a wider sound stage. The 50mm drivers offer exceptional sound reproduction and wide dynamic range to instill confidence in your final mix or simply provide outstanding sound quality for your general listening pleasure.

With a self-adjusting headband for a secure, natural fit, the SR850s provide total comfort for extended studio sessions. An 1/8" to 1/4" gold-plated adapter is included with the headphones.

Whether you’re enjoying music or mixing studio tracks, the SR850s offer professional performance and comfort.

Features of SASR850C:

• Samson SR850 Professional Semi-open Studio Reference Monitoring Headphones 
• Ideal for professional recording and hi-fi monitoring
  
• Transparent response with airy highs and pronounced depth
  
• Over-ear, semi-open-back design with velour cushioning
  
• Large 50mm drivers with rare earth magnets
  
• Adjustable headband
  
• 10Hz–30kHz frequency response
  
• 32 Ohm impedance
  
• 1/4" adapter included

 

---

Advantages of buying from an authorized seller:

 

• Best prices - We sell all Samson Products at great prices
  
• Full Factory Warranty
  
• Lifetime Customer Service by Samson product experts
  
• Guaranteed legitimate and authentic merchandise 
  

Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.