Package Includes:

• (1) Pair Memphis Audio MXA82TW 8" Marine Wakeboard Tower Speakers/LED+Swivel White
• (1) Rockville RGHR-ZA 4 Zone Marine Gauge Hole Receiver Bluetooth App Control+Remote
• (1) Rockville KRYPTON MT1 1600w 2 Channel Marine/Boat Amplifier w Volt Meter
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit

---

Description:

Compression horn tower speakers cast massive sound across the lake thanks to the center mounted compression horn tweeter. This design allows for exceptional throw allowing you to hear epic music at great distance. Compression horn towner speakers are UV, Water and element resistant and feature full coverage grills to keep them protected in any application. These 8" white tower speakers are the biggest and best tower speaker offered by Memphis and will not disappoint the next time you're out on the lake.

Features:

• White finish
• Compression horn tweeter design
• Water, element & UV resistant (IP66)
• Adjustable aluminum hardware w/ 360° EZ swivel mount
• RGB LED included in both 6.5" & 8" versions
• 4O Impedance

Specifications:

• Size: 8"
• RMS/Peak: 150/300
• Impedance: 4
• Dimensions: 13.5 x 10
• Clamp Fit: 1.75" to 3"
• Warranty (YRS): 2 Y
• Grill Included: Y*

---

All About Your RGHR-ZA:

How To Set Up Your RGHR-ZA:

The Wires, Inputs, and Outputs Explained:

The Zones on your RGHR-ZA Explained:

What's in the Box:

• Marine digital media receiver
• Wired remote with zone controls
• USB extension cable (40 inches)
• Mounting Screws for installation
• Waterproof wiring harness for installation
• Owners manual and warranty card

Description:

4 Zones!
This marine receiver has 4 zones that each have independent volume control. There is also 3 ways to control each zones volume. You can raise or lower the volume in each zone either through the receiver, the wired remote, or through our iPhone or Android app.

There are 3 zones for full range and a 4th zone for a subwoofer. Here is how it works. Zone 1 is the built in powerful 4 channel amplifier. With the addition of an external amplifier you can use the additional zones as follows: Zone 2 controls a full range set of RCA outputs. Zone 3 controls a second set of full range RCA outputs. Zone 4 controls a 3rd set of RCA outputs that are dedicated for subwoofer(s).

App Control
This receiver has a really nice app available in the App store for both Android and iPhone. The App gives you full control over the volume in any zone as well as the ability to change the song or source, etc. All the commonly used functions are available in the app.

3? TFT display
Our built in 3? TFT display is crystal clear and it makes it easy to navigate your tracks and settings. We also include a rear view camera input as well as an aux A/V input.

Intuitive Screen Display
With the intuitive screen display you can access all your photos, videos and music all in one place. Hold the band button to access photos and videos and songs stored on a USB thumb drive.

Crazy loud!
We used a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Latest listening features
The RGHR-ZA gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Includes a wired remote!
We include a wired remote inside the box. Most famous brands like to make extra money on the remote, but at Rockville we just include it because we know it will make your experience better. We custom engineered the remote to be able to control basic functions as well as control the volume in each zone!

Features:

• Rockville RGHR-ZA Weather Resistant Gauge-Hole Digital Media Receiver with 4 Zones and App control
• Includes wired remote with the ability to control the volume in each zone
• APP control allows you to download the free app for Android or iPhone and control zone volume, song selection, source selection, and more
• 3? TFT color display makes it easy to navigate
• Built in Bluetooth/USB/AM/FM playback
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• 3 pairs of pre-amp outputs
• 4 zones each with volume control (zone 1 = built in amplifier, zone 2 and 3 are RCA outputs, and zone 4 is the sub output)
• Built in EQ with preset EQ curves (Pop, Classic, Rock, Jazz, Beat, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files stored on a USB thumb drive or any other USB device
• USB plays video
• RCA A/V input to play back a video source
• Rear camera input
• RCA Aux Input
  
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Big easy to use buttons
• Back-lit 3 inch TFT display
• IP66 waterproof level
• meets ASTM B117 and ASTM D4329 standards
• Humiseal coated PCB board for waterproofing and protection from the elements
• Required cutout: 3" (diameter) x 4.96" (depth) x 4.5" (top plate diameter)
• 5.75 inch depth including the top plate
• USB is 500mA and 5V and supports 16GB max
• Specs of the built in amplifier
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
  
• Highly efficient even when running at 2 ohms!
  
• Low distortion even at top volumes

---

How To Install a Marine Amplifier onto Your Boat:

VIDEO OF KRYPTON MT1:

What's in the box:

• Amplifier
• Birth sheet with tested power
• Mounting Screw Kit
• Warning Instruction
• Warranty
• Owner's manual

Description:

We took the sound of our Krypton car amps and we added top of the line marine grade parts so that they will withstand even the harshest conditions on the water.

We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink including the bottom plate is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!

The KRYPTON MT1 is a class AB 2-Channel high power amplifier with 1,600 watts peak output and 400 watts dyno-certified RMS power. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. In high pass mode we allow you to filter out frequencies between 15Hz - 4KHz. In full mode you will not be filtering any frequencies. The really cool part is in low pass mode you can use the high pass and low pass mode. So for example you can set the low pass mode to 50 hz, and then you can set the high pass to 15 Hz. In this case you would be playing frequencies in the range of 15-50 Hz on this channel. This would be an example of using the subsonic filter. Another option you have is for midrange speakers, you can use our low pass filter and set it really high. Lets say to 3Khz and then you can set the high pass to 150Hz and your midrange speakers will only play that frequency range. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.

The KRYPTON MT1 is protected by a fully IC controlled circuit which includes mute, delay, and soft start technology so that the amplifier will turn on safely every time and protect your speakers from popping.

You will also notice we decided to add a cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

This is a class A/B amplifier which is what we recommend to get the best sound quality out of full range speakers.

Features:

• Rockville KRYPTON MT1 1600w Peak/400w Dyno-Certified RMS 2 Channel Marine/Boat Amplifier w Volt Meter
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 2 Ohm: 200 Watts x 2 Channel <1% THD+N
• 4 Ohm: 120 Watts x 2 Channel <1% THD+N
• 4 Ohm Bridged: 400 Watts x 1 Channel
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
• 2 Ohm: 800 Watts x 2 Channel
• 4 Ohm: 480 Watts x 2 Channel
• 4 Ohm Bridged: 1600 Watts x 1 Channel
• Painted Conformal Coated PCB Board (Uses 2577 Waterproof Glue)
• Rustproof Aluminum heat sink with black hairline finish
• Stainless steel end panels are rustproof
• All screws and mounting hardware are stainless steel and rustproof
• Bottom panel is aluminum and rustproof
• Digital Voltage Display on Amp
• High Level Input(Auto ON)
• High-Speed MOSFET Power Supply
• Under Voltage Protection at 10V
• Over Voltage Protection at 16V
• Tertiary Supplies Circuitry
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter: 50Hz - 250Hz
• High Pass Filter: 60Hz -1.2KHz
• Full IC-Controlled Protection Circuitry
• Fully Adjustable 12dB Bass Equalizer
• Mute and Delay Soft Start System
• RCA Line Output
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: >90dB
• Frequency Response: 10Hz - 50KHz
• Damping Factor: >100 @ 100Hz
• 25 Amp x2 ATC Fuse
• Dimensions: (Lx W x H) 12.4" x 8.7" x 2.2"

---

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25' Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties