- (1) Memphis Audio MXA1MC Marine Gauge Digital Media Bluetooth Receiver Boat/ATV/UTV
- (1) Memphis Audio MXA1MCR Marine Boat Wired Remote Control for MXA1MC Receiver
- (1) Memphis Audio 16-MXA2.140 280w 2-Channel Amplifier For Polaris RZR/ATV/UTV/Cart
- (1) Pair of Polk Audio DB652 6.5" 300 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- (1) Pair of Rockville MAC65B 6.5" Black Aluminum Wakeboard Tower Speaker Pod Enclosures
- (1) Pair of Rockville RWBC Neoprene Covers For 6.5" Marine Wakeboard Tower Speakers
Description of MXA1MC:
The MXA1MC is a powerful gauge style media center designed to fit into standard gauge openings and engineered to be water and element resistant making it perfect for marine and powersports applications.
The MXA1MC is a Bluetooth-enabled device allowing you to stream and control your music on your boat or side-by-side with your phone safely put away.
In addition to Bluetooth, this unit features an AUX input and USB thumb drive input and an AM/FM radio tuner depending on your preference.
The MXA1MC features a built in 4x50watt amplifier to power your audio system along with 2 pair of pre-amp outputs to add additional amplification for larger systems.
Combine the MXA1MC with the MXA1MCR remote to add additional control in multiple locations on your side-by-side or boat.
A great audio system starts with the perfect controller, the MXA1MC is a versatile and powerful solution that is reliable and simple to control so you can bring your music with you anywhere.
Features:
- Rotary volume control
- AM/FM multi region tuner
- Bluetooth audio streaming w/ easy pair
- Rear AUZ & USB (charge & flash drive)
- 2-pair preamp outputs
- EEPROM virtual memory
- 50 watts x 4-Ch amplifier built in
Specifications:
- RMS Power: 25 x 4 Watt
- Peak Power: 50 x 4 Watt
- Cut Out Diameter: 3.6 Inch
Description of MXA1MCR:
The MXA1MCR is a remote designed to work in conjunction with the MXA1MC Gauge Style Media Center.This remote is water and element resistant and allows you to take control of your media system from a remote location on your boat or side by side.
The wired remote features a 25Ft jacketed cable allowing you to install it virtually anywhere. Take control of volume, mute, track and source with this simple to use remote.
Features:
- Controls volume, mute, track, source
- 25Ft cable included
- Water and element resistant
- Illuminated buttons for low light use
Specifications:
- RMS Power: 25 x 4 Watt
- Peak Power: 50 x 4 Watt
- Cut Out Diameter: 3.6 Inch
What's in the Box:
- 2-Channel amplifier
- 12" Power/ground/turn-on harness (3-pin Molex plug)
- 12" Speaker output harness (large 4-pin Molex plug)
- 8" Speaker input harness (small 4-pin Molex plug)
- 8" Line-level input harness (small 4-pin Molex plug)
- 4 Self-tapping screws (5/8" length)
- M5 x 15mm screws
Description of 16-MXA2.140:
Memphis sound, plus marine-rated reliability
Memphis Audio's compact MXA2.140 2-channel amp can deliver 100 watts RMS per channel at 4 ohms, or 140 watts RMS at 2 ohms, so it's an excellent choice for your marine or powersports audio system. This rugged amp features high-pass and low-pass filters, plus variable bass boost, so you can adjust the output to suit your tastes.
Stands up to the outdoors
Life on the water or the trail can be tough on electronics, so Memphis Audio designed this Class D amp to resist salt, spray, and punishing sunlight. That said, the MXA2.140 will stay cool and run reliably when it's installed in tight spaces, like consoles or storage lockers. And Memphis Audio backs this little powerhouse with a 2-year warranty.
Product Highlights:
- 2-channel marine amplifier
- 100 watts RMS x 2 at 4 ohms (140 watts RMS x 2 at 2 ohms)
- variable high- and low-pass crossovers
- variable bass boost
- conformal-coated circuit board
- weather-resistant construction
- can't be bridged to mono operation
- 10-gauge wiring kit recommended (sold separately)
- dimensions: 7-1/2"D x 4"W x 1-3/4"H
- warranty: 2 years
Features:
- Amplifier Class: D
- Low-Pass Crossover Frequency: 50Hz, 250H
- High-Pass Crossover Frequency: 80Hz, 120Hz
- Fuse Rating: 25
- Speaker Level Inputs: Yes
- Height (inches): 1-3/4
- Width (inches): 7-1/2
- Depth (inches): 4
- Parts Warranty: 2 Years
- Labor Warranty: 2 Years
Specifications:
- RMS Power Output (Watts x Channels): 100 x 2
- Frequency Response at Rated RMS Power: 20-20k Hz
- THD at Rated RMS Power: 0.1%
- Signal to Noise Ratio: 100 dB
- Input Voltage: 14.4v
- Power at 2 Ohms (Watts x Channels): 140 x 2
- Minimum Impedance Unbridged: 2
Authorized Polk Audio Dealer!
Description of DB652:
Everything you love about Polk’s Dynamic Balance technology—that rich, clean, full-range sound—is built into the marine-tough, yet ruggedly sophisticated, DB+ series. And with its universal fit, it can be installed in any vehicle: Automobiles, motorcycles, boats, ATVs—you name it.
High Performance Upgrade
Upgrade from your OEM speaker system toward a bigger, fuller, high-performance sound.
Marine Certified
Built to last for cars, boats and ATVs with an IP56 rating and tested for Salt-fog, UV & Humidity.
Universal Fit
Simple drop in installation for any vehicle including cars, boats, ATV’s -- you name it.
Zero Tweeter Protrusion
A shallow tweeter design to ensure your factory speaker grille re-installs with ease for a flush, seamless look.
Dynamic Balance Technology
Patented process that guides material selection through rigorous testing
that identifies and cancels out unwanted resonant frequencies.
Features:
- (2) Polk Audio DB652 6.5" 300 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems
- Marine certified with IP65 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity
- Polypropylene and UV tolerant cone with waterproof inner and outer surrounds
- Simple drop-in installation for any vehicle including cars, boats, ATVs—you name it
- Zero tweeter protrusion and reduced mounting depth for a precise fit
- Dynamic Balance technology offers a rich, clean, full-range sound
- ¾”, 20mm Tweeter ensures clear, balanced mids and highs
- 100 Watts at Continuous Power; 300 Watts at Peak Power
Specifications:
- Driver Compliment: 6.5" (165 mm)
- Tweeter Compliment: 0.75" (19 mm)
- Cut-Out Diameter: 5" (127 mm)
- Mounting Height: 0.47" (12 mm)
- Driver Mounting Depth - Bottom Mount: 2.12" (54 mm)
- Driver Mounting Depth - Top Mount: 1.77" (45 mm)
- Grille - Height: 20 mm
- Driver Complement Mid / Woofer - Diameter: 6.5" (165 mm)
- Driver Complement Tweeter - Diameter: 0.75" (19 mm)
- Max Sensitivity: 92 dB
- Nominal Impedance: 4 ohm
- Total Frequency Response: 40Hz-22kHz
- 300 Watts Peak Power Total Per Pair / 150 Watts Peak Power Per Speaker
- 100 Watts RMS Total Power Per Pair / 50 Watts RMS Per Speaker
Advantages of buying from an authorized seller:
- Best prices - We sell all Polk Audio Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Polk Audio product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Polk Audio from an unauthorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Video of MAC65B:
Includes:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375” rubber inserts
- (2) 2.25” rubber inserts
- (2) 2.5” rubber inserts
- (2) 2” rubber inserts
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65B comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65B features a black powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair of Rockville MAC65B black aluminum can wakeboard tower enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful black powder-coat finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install—no exposed wires or terminals
- High efficiency design features the perfect airspace for 6.5” speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
- Mounting Depth - 6.7"
- Total Depth - 9.15"
- Cutout - 5.55"
- Diameter - 7.39".
- Mounting diameter - 6.4" (Narrow diameter - 6.12")
- Height of mount - 3.75"
- Total height of unit - 11"
*Although the pre-drilled holes will accommodate most speakers on the market, there may be some that don't fit. If that is the case you can drill holes into the lip of the can to line up with your speaker's mounting holes.
Video of RWBC:
Features:
- Rockville RWBC (2) 6.5" Neoprene Wakeboard Tower Speaker Covers
- Affordable and popular way to protect speakers to keep them looking their best
- Protects your speakers from water, moisture, and all other outdoor elements
- Made of high quality, durable Neoprene fabric
- Heavy duty stitching
- Strong zipper provides snug fit and easy fitting
- Compatible with most Rockville 6.5" Tower Speaker Enclosures (ex. MAC65, DMAC65, RWB65, DWB65)
- Includes 2 covers
Fitment Specification:
- Will fit 6.5” Speaker pods measuring
- Outside diameter: 7.4”
- Length: 9.25”
- UPC:
- 613815687986
