Package Includes:
- (1) Pair JBL MT6HLB Tower X Marine 6.5" Wakeboard Speakers w Compression Horn+LED
- (1) Rockville RGHR51 5 Zone Single Din Marine Receiver Bluetooth/Radio/Wired Remote
What's In The Box:
- 2 x Enclosed speaker assembly
- 2 x Two-piece bracket assembly
- 4 x Rubber pad
- Mounting hardware: 2x hex head screws, 2x M6 bolts, 4x M8 x 35mm bolts, 4x M8 x 55mm bolts, 4x Flat-washers, 4x Lock-washers, 2x M8 hex-keys, 2x M6 hex-keys
- 2 x RGB lighting cable
- 2 x Security cable
- 2 x Neoprene cover
- 2 x JBL sticker
- 1 x Quick start guide
Description:
Engineered for the ultimate sound experience
The JBL Tower X Marine Speaker system is ready to take your next outdoor adventure to the next level. The fully marinized speakers deliver a JBL pro sound experience complete with RGB lighting to bring it to life. Their rigid Polypropylene long-throw woofer cones deliver great bass to ensure you never miss a beat, coupled with a titanium horn-loaded compression tweeter and fidelity for accurate reproduction. The woofer and tweeter assembly incorporates a patent pending design that helps to project the sound over the stern of the boat, directly to the wave rider's sweet spot, while providing great sound inside the boat.
Features:
Patent Pending Design
JBL Tower X Marine Speakers include a patent pending angled face speaker design that points the speakers at the rider's listening position instead of the water at the back of the boat. This provides the rider with excellent sound quality, reduces the smearing effect caused by your music reflecting off the water, and an enjoyable listening experience for everyone else inside the boat.
Marine Rated
For JBL, failure is not an option. Extreme care was taken to engineer marine-grade materials & components that overcome the demands of harsh marine environments. We will not rest until we are sure your product will survive for years to come.
High Output Design
At JBL, we want to bring your concert to the water. The JBL Tower X MT6HLB includes a 6.5-inch long-throw polypropylene woofer cone and rubber surround, coupled with a 1-inch horn-loaded titanium compression tweeter to make sure you get the deep bass, smooth highs, superior sound quality and extreme power handling you expect.
Multi-color RGB Lighting
JBL Tower X speakers come standard with multi-color RGB LED lighting engineered to withstand the harshest environment and keep the party going all night long. Hard-wire directly to the speaker to choose from one of seven color options out of the box, or connect to your existing RGB lighting control system to operate seamlessly with your existing RGB components.
360-degree Bracket Design
JBL Tower X Marine Speakers feature a rugged 360-degree rotating bracket design adjustable to 1.75in. to 3in. bar sizes. An added bonus is the ability to thread your wiring directly from the bar through the bottom bracket and into the speaker enclosure to limit exposed wiring and allow for a clean install.
Individually Voiced
For many brands, off-the-shelf speakers and a cursory approval of frequency response curves are good enough. That's not the case with JBL. We don't only listen to our speakers against the competition - we voice them against each other to ensure each line has the consistent JBL sound signature that's known and sought out by those who care about their audio. This is just part of an extensive development process undertaken by some of the best transducer engineers in the world to provide the finest listening experience at any price point.
Harman Standard Reliability Testing
JBL speakers have to undergo a testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, and drives them at full power for days at a time. In the case of our marine speakers, we add an intense salt spray and UV test to ensure that they provide years of enjoyment without missing a beat.
JBL Industrial Design
At JBL, we take pride in our iconic design heritage. Our design team took great care to ensure that your JBL Tower X Marine Speakers will look great on your boat. The smooth curve of the enclosure body, angular grille face design with embedded JBL horn logo, and "jet engine" component at the rear of the enclosure all tie together with our classic, current and future design language while concentrating on the design of your boat.
Specifications:
- Power Handling: 100W RMS, 300W peak
- Sensitivity (@ 2.83V): 90 dB
- Frequency Response: 50Hz - 20kHz
- Voice Coil Diameter: 1.5 in. (38.5 mm)
- Impedance: 4 ohms
- Adjustable Bar Diameter: From 1.75 in - 3 in. (44.5 mm - 76.2 mm)
All About Your RGHR51:
How To Set Up Your RGHR51:
RGHR51 WIRES/INPUTS/OUTPUTS Explained!:
RGHR51 Zones Explained!:
How To Install A Head Unit In Your UTV:
What's In The Box:
- Marine digital media receiver
- Wired remote with zone controls
- USB extension cable (40 inches)
- Mounting Screws for installation
- Waterproof wiring harness for installation
- Owner manual and warranty
Description:
5 Zones!
This marine receiver has 5 zones that each have independent volume controls both from the receiver and from the wired remote which we include. Here is how it works. Zone 1 and Zone 2 are the built in powerful 4 channel amplifier. With the addition of external amplifier(s) you can use the additional 3 zones. Each set of RCA outputs will connect to your external amplifier(s) and you will be able to control the volume level either from the receiver or from the wired remote.
4" TFT display
Our built in 4" TFT display is crystal clear and it makes it easy to navigate your tracks and settings. We also include a rear view camera input as well as an aux A/V input.
Intuitive Screen Display
With the intuitive screen display you can access all your photos, videos and music all in one place. Hold the band button to access photos and videos and songs stored on a USB thumb drive.
Crazy loud!
We used a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.
Latest listening features
The RGHR51 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.
Includes a wired remote!
We include the wired remote inside the box. Most famous brands like to make extra money on the remote, but at Rockville we just include it because we know it will make your experience better. We custom engineered the remote to be able to control basic functions as well as control the volume in each zone!
Features:
- Rockville RGHR51 Single-Din Weather Resistant Digital Media Receiver with 5 Zones that each have independent volume control
- Includes wired remote with the ability to control the volume in each zone
- 4" TFT color display makes it easy to navigate menus
- Built in Bluetooth/USB/AM/FM playback
- Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
- 3 pairs of pre-amp outputs each with independent volume controls
- 5 zones each with volume control (zone 1+2 = built in amplifier, zones 3, 4, 5 are the RCA outputs
- Built in EQ with preset EQ curves (Pop, Classic, Rock, Jazz, Beat, Flat)
- IP66 Waterproof Certification (Tested to withstand the elements)
- USB Input to play back audio files store on a USB thumb drive or any other USB device
- USB plays video
- RCA A/V input to play back a video source
- Rear camera input
- RCA Aux Input
- AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
- Bluetooth built in to stream audio from any Bluetooth enabled device
- USB Input Charges Your Phone
- Big easy to use buttons
- IP66 waterproof level
- Meet ASTM B117 and ASTM D4329 standards
- Humiseal coated PCB board for waterproofing and protection from the elements
- USB is 500mA and 5V and supports 16GB max
- Specs of the built in amplifier
- TDA7850 power amplifier built in
- Low distortion even at top volumes
Specifications:
- Standard single din mounting: 1.97" Mounting Height x 3.94" Mounting Length (Inches) (this is the required mounting cutout)
- Mounting Depth: 3.23" (Inches)
- Front face plate: 7.87" L x 3.94" H (Inches)
- UPC:
- 613817123253
