Package Includes:

• (1) Pair JBL MT6HLB Tower X Marine 6.5" Wakeboard Speakers w Compression Horn+LED
• (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote

---

What's In The Box:

• 2 x Enclosed speaker assembly
• 2 x Two-piece bracket assembly
• 4 x Rubber pad
• Mounting hardware: 2x hex head screws, 2x M6 bolts, 4x M8 x 35mm bolts, 4x M8 x 55mm bolts, 4x Flat-washers, 4x Lock-washers, 2x M8 hex-keys, 2x M6 hex-keys
• 2 x RGB lighting cable
• 2 x Security cable
• 2 x Neoprene cover
• 2 x JBL sticker
• 1 x Quick start guide

Description:

Engineered for the ultimate sound experience

The JBL Tower X Marine Speaker system is ready to take your next outdoor adventure to the next level. The fully marinized speakers deliver a JBL pro sound experience complete with RGB lighting to bring it to life. Their rigid Polypropylene long-throw woofer cones deliver great bass to ensure you never miss a beat, coupled with a titanium horn-loaded compression tweeter and fidelity for accurate reproduction. The woofer and tweeter assembly incorporates a patent pending design that helps to project the sound over the stern of the boat, directly to the wave rider's sweet spot, while providing great sound inside the boat.

Features:

Patent Pending Design
JBL Tower X Marine Speakers include a patent pending angled face speaker design that points the speakers at the rider's listening position instead of the water at the back of the boat. This provides the rider with excellent sound quality, reduces the smearing effect caused by your music reflecting off the water, and an enjoyable listening experience for everyone else inside the boat.

Marine Rated
For JBL, failure is not an option. Extreme care was taken to engineer marine-grade materials & components that overcome the demands of harsh marine environments. We will not rest until we are sure your product will survive for years to come.

High Output Design
At JBL, we want to bring your concert to the water. The JBL Tower X MT6HLB includes a 6.5-inch long-throw polypropylene woofer cone and rubber surround, coupled with a 1-inch horn-loaded titanium compression tweeter to make sure you get the deep bass, smooth highs, superior sound quality and extreme power handling you expect.

Multi-color RGB Lighting
JBL Tower X speakers come standard with multi-color RGB LED lighting engineered to withstand the harshest environment and keep the party going all night long. Hard-wire directly to the speaker to choose from one of seven color options out of the box, or connect to your existing RGB lighting control system to operate seamlessly with your existing RGB components.

360-degree Bracket Design
JBL Tower X Marine Speakers feature a rugged 360-degree rotating bracket design adjustable to 1.75in. to 3in. bar sizes. An added bonus is the ability to thread your wiring directly from the bar through the bottom bracket and into the speaker enclosure to limit exposed wiring and allow for a clean install.

Individually Voiced
For many brands, off-the-shelf speakers and a cursory approval of frequency response curves are good enough. That's not the case with JBL. We don't only listen to our speakers against the competition - we voice them against each other to ensure each line has the consistent JBL sound signature that's known and sought out by those who care about their audio. This is just part of an extensive development process undertaken by some of the best transducer engineers in the world to provide the finest listening experience at any price point.

Harman Standard Reliability Testing
JBL speakers have to undergo a testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, and drives them at full power for days at a time. In the case of our marine speakers, we add an intense salt spray and UV test to ensure that they provide years of enjoyment without missing a beat.

JBL Industrial Design
At JBL, we take pride in our iconic design heritage. Our design team took great care to ensure that your JBL Tower X Marine Speakers will look great on your boat. The smooth curve of the enclosure body, angular grille face design with embedded JBL horn logo, and "jet engine" component at the rear of the enclosure all tie together with our classic, current and future design language while concentrating on the design of your boat.

Specifications:

• Power Handling: 100W RMS, 300W peak
• Sensitivity (@ 2.83V): 90 dB
• Frequency Response: 50Hz - 20kHz
• Voice Coil Diameter: 1.5 in. (38.5 mm)
• Impedance: 4 ohms
• Adjustable Bar Diameter: From 1.75 in - 3 in. (44.5 mm - 76.2 mm)

---

All about your RGHR2:

How To Set Up Your RGHR2:

Included In The Box:

• Marine digital media receiver
• Wired remote with 32.8 foot wire
• USB extension cable (40 inches)
• Mounting bracket
• Screws
• ISO wiring
• Owner manual and warranty

Description:

The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.

Crazy loud!

We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Included wired remote

Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.

Latest listening features

The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Ability to connect multiple external amps

This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplify your speakers and a subwoofer amplifier.

Features:

• Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files store on a USB thumb drive or any other USB device
• RCA Aux Input
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
• Big easy to use buttons
• Backlit LCD display
• Wired Remote Control Included (normally $50)
• Required cutout: 2.96" (diameter) x 2.75" (depth)
• USB is 500mA and 5V and supports 16GB max
• Dimensions:
• 2.96" cutout mounting diameter
• 4.45" diameter top plate
• 3.9" mounting depth (not including top plate)
• 5.0" depth including the top plate
• Specs of the built in amplifier:
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
• 4 x 28 watts RMS @ 4 ohms
• Highly efficient even when running at 2 ohms!
• Low distortion even at top volumes