- (1) Boss MRGB10B 10" 800w Black Marine LED Subwoofer Boat Audio Sub w/ Remote 4-Ohm
- (1) Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp Amp New
- (1) Rockville RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
What's in the Box:
- (1) Subwoofer
- (1) Wireless Remote Control for RGB lights
Features of MRGB10B:
- Weather Proof One 10" Woofer with SINGLE 4 ohm 1 High Temperature Voice Coil Voice Coil
- 800 Watts MAX 400 Watts RMS Power Handling
- 87dB Sensitivity, 44 Hz Resonant Frequency
- Polypropylene Cone and Rubber Surround
- Works in 1 CuFt Sealed or 1.9 CuFt Ported enclosure
- RGB LED Illumination
Fully Marinized
- Fully Marinized is the term we use for our Marine and Outdoor products that are Weather Proof. We integrate high-tech, state-of-the-art waterproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections to protect the product against the harsh outdoor elements and resist corrosion.
Single Voice Coil
- A subwoofer with a single voice coil can be powered by an appropriately matched amplifier or can be combined with multiple single voice coil subwoofers to achieve a variety of impedances to match your amp set up. Single voice coil subwoofers are generally ideal for low to medium-power applications.
Ported Enclosure
- This subwoofer will thrive in well in a ported enclosure. A ported enclosure is easy to spot because of the vent (port). This enclosure will be bigger than a sealed enclosure and it also has greater SPL output, resulting in chest-thumping bass with authority. For proper tuning and optimum subwoofer performance in a ported enclosure, we recommend using an amplifier with a subsonic filter.
Wireless Remote Control
- A wireless remote control gives you commanding access to the key functions of your unit from the palm of your hand.
Sealed Enclosure
- This subwoofer will operate well in a sealed enclosure that will yield solid, tight bass. You can either purchase a pre-fabricated enclosure or build one to suit your installation needs. Sealed enclosures are relatively easy to build and are the smallest enclosure the subwoofer is designed for.
Specifications:
- Subwoofer size: 10"
- RMS power handling: 400 Watts
- Impedance: 4 Ω
- Peak power handling: 800 Watts
- Voice coil configuration: Single
Mounting Dimensions:
- Mounting diameter: 9.375"
- Mounting depth: 4.12"
T/S Parameters:
- FS: 44 Hz
- QES: 0.65
- QMS: 3.31
- QTS: 0.54
- VAS: 0.69
- XMAX (ONE-WAY): 9 mm
- SENSITIVITY (1W/1M): 87 dB
Enclosure Specifications:
- Recommended sealed: 1 Cu Ft.
- Recommended ported: 1.89 Cu Ft.
- Port dimension: Round 4 Inch
- Port length: 13"
- Port frequency: 45 Hz
Video of RXM-T1:
Unboxing Video for RXM-T1:
Description:
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXM-T1 is a 2 channel marine amplifier with 1,500 Watts peak output and 500 Watts MS (2x 250 @ 4 Ohms). You can also bridge the amplifier and get 1 x 750 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
The RXM-T1 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust, chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.
One of the tricks to determine the real power of an amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-T1 features a 50 Amp Maxi Fuse. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-T1 you are getting your money’s worth and then some.
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. This amplifier is completely universal. It can be installed to any marine system.
Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 channel / bridgeable mono model, mute and delay soft start technology, and a crossover band-pass control. The RXM-T1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).
Features:
- Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N
- 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD
- 1 x 370 Watts bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms)
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Fully Adjustable 12dB / Octave Crossover
- Low Pass Filter : 50Hz - 250Hz
- High Pass Filter : 15Hz - 250Hz
- Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- RCA Preamp Line Output
- ELNA Brand Audiophile Capacitors
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- High Level Input with Smart Auto Turn-On
- Minimum THD at Rated Power: < 0.05%
- Frequency Response : 10Hz - 40KHz
- Damping Factor : > 200 @ 100Hz
- 50 Amp Maxi Fuse
- Dimensions : (W x H x L) 8.6" x 2" x 13"
Video of RMWK:
Features:
- Rockville RMWK8 8 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned Oxygen Free 100% Copper Flexible PVC RCA Cable
- 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to Better Resist Chemicals in the Battery Compartment
- 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge Tinned Oxygen Free 100% Copper, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1 Silver Mini-AGU Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1 50A Mini-AGU Fuse
- 2 Rust Resistant Ring Terminals
- 2 Rust Resistant Spade Terminals
- 5 Rust Resistant Speaker Cable Terminals
- 1 Rust Resistant Washer
- 10 White Cable Ties
Owner's manual
- UPC:
- 613817165611
