Package Includes:
- (1) Overhead 6.5" Speaker+Receiver+Gauges Enclosure For 2012-2018 Polaris RZR 570
- (1) Rockville RMC65LB 6.5" 600w 2-Way Black Marine Speakers w/Multi Color LED+Remote
- (1) MB Quart NA2-400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
- (1) SSV Works 2008-2014 Polaris RZR 570/800/900 Under Dash 10" Subwoofer Enclosure
- (1) SSV Works 10M 10" 600w Waterproof Subwoofer Sub 4 Polaris RZR/ATV/UTV/Cart/Jeep
- (1) Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
- (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote
Description of MPS-RZROHC:
Now you can wire your Polaris UTV to play your tunes with this overhead console MPS-RZROHC designed specifically for Polaris UTV’s with hard top roofs (the OH-UNI02 is fully universal). The ABS plastic housing mounts above you, keeping it up high out of mud and water and keeping it from being bumped by feet or knees. The console comes with the ability to install any media you chose. Such as a double DIN single DIN radio, Bluetooth® receiver etc. The overhead also has 2 speaker cut outs allowing the installation of either 6.5”- 6.75” speakers. It’s time to out fit your Polaris UTV to play your favorite tunes and get this required item today!
Features:
- Applications: Polaris 2012-18 RZR 570, 2008-14 RZR/S 800, 2011-14 RZR XP 900/4, 2014-18 RZR XP 1000/4, 2016-18 RZR XP Turbo/4, 2019 RZR General 1000
- Designed for Polaris UTV’s with hard top roofs
- Made from durable ABS Plastic
- 2 speaker cut outs for 6.5”- 6.75” speakers
- Single and double DIN radio templates included
- Mounting hardware included
- Will accommodate: Single DIN radios, double DIN radios, marine media units, Bluetooth® receivers, gauges, dome lights, switches, etc.
Includes:
- Pair of 6.5" marine speakers
- 16.4 feet of Speaker Wire
- Mounting Screws
- LED Remote Controller
Description of RMC65LB:
The RMC65L is the same
amazing speaker as our RMC65 with the addition of an awesome LED lighting system built in. Our LED speakers feature 19 dynamic modes that
are adjustable through the remote. There are 20 switchable static colors which can also be set through the remote. You can also strobe the
lights and adjust the speed through the remote. You can adjust the brightness intensity of the light as well. There is a demo mode that
will run through 9 dynamic programs and repeat.
The RMC series of
marine speakers by Rockville are a major upgrade to our old RMS series. Don’t get me wrong we loved our old series, but we strive for
perfection. We wanted a speaker that is more durable, more water resistant, can handle more power, and put out better sound quality!
As always we sent our
team on a speaker-hunting adventure. We tested countless prototypes until the RMC series was born. We ended up with a speaker that has a lot
more bass and mids than any other speaker on the market at this price point. This speaker will destroy all those cheap dual cone speakers, and
it will compete with top branded marine speakers on the market today!
These speakers are
completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage.
Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Rockville engineers
care about quality and sound more than anything else. The RMC65L was designed in a molded ABS plastic basket. The polypropylene cone is
reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate
unwanted distortion. In addition rubber is a very waterproof material. The ½" polymer tweeter puts out incredible sounding highs. The low end
bass and mids of these speakers really makes them stand out.
The RMC65L 6.5" marine
speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh
environments. These speakers can withstand tons of abuse and can handle 300 watts peak and 75 watts RMS each. These Rockville speakers comply
with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant
means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other
brands stated higher wattage the Rockville RMC65L speakers were able to handle more than double the power!)
Using only true marine grade components and materials, the Rockville RMC65L speakers are fully marinized against salt & fresh water
conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant
coating to completely protect the speakers.
The speakers come with everything you need for installation including pre mounted grills and mounting hardware.
Features:
- Rockville RMC65L 6.5” 2-Way 300 Watt Marine Boat Speakers with LED Light System
- CEA Compliant Power Ratings
- Power Rating: 300 Watts Peak /75 Watts RMS Per Speaker
- System Power: 600 Watts Combined
- 19 Dynamic LED Modes
- 20 Switchable static LED Colors
- 256-Grade PWM
- Adjustable LED Strobe Speed
- 5 Adjustable LED Brightness Settings
- Slim Card Type LED Remote
- Demo LED Mode
- Included Remote can be paired with one or more speakers
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Waterproof and rustproof
- Stainless Steel Terminals
- Molded ABS plastic basket
- Polypropylene Mica Injected Cone
- Rubber Surround
- High quality ferrite magnet
- 13mm (0.5” inch) Polymer Tweeter
- Oversized 1” CCAW Kapton Voice Coil
- Pre-installed mounting screws included
- Perfect for both marine, outdoor, and car use
- Impedance: 4 Ohms
- Frequency Response: 55Hz - 20KHz
- Sound Pressure Level: 91dB @ 1w/1m
- Total Diameter: 7.09”
- Cutout Diameter: 5.31”
- Total Height: 2.48”
- Mounting Depth: 2.48”
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.
Features of NA2-400.2:
- MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
- Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
- Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
- Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
- Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: Yes - Water resistant for durability in any environment
Specifications:
- Class: Full Range Class D
- Variable Voltage: 0.2V~9V
- Signal to Noise Ratio: >90dB
- Frequency Response: 20Hz-20kHz
- Crossover Type: Electronic 12dB Per Octave
- Low Pass Crossover: Switch Low Pass 300 Hz
- Bass Boost: 0-12dB@45Hz
- Subsonic Filter: 60Hz
- Power @ 2-Ohms: 2 x 200W
- Power @ 4-Ohms: 2 x 100W
- Total Channels: 2
- Audio Inputs: RCA
- Power Terminal 12v/GND: Molex 10 ga
- Speaker Terminal Wire Gauge: Molex Plug Connector
- Fusing: 1 x 30 Amps
- Certifications: Marine & Powersports
- Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
- Weight: 2.12 lbs (0.96 kg)
Authorized SSV Works Dealer!
Description of RZ-UDSB10-U:
SSV Works custom molded sub enclosure is designed for a 10" subwoofer and bolts into the under dash area clear of knees and feet. NO CUTTING REQUIRED, the box simply bolts in and provides the proper airspace required for a 10" woofer. They are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match Polaris textures and can be custom painted to match your color scheme.
Features:
- SSV Works 2008-2014 Polaris RZR 570/800/900 Under Dash 10" Subwoofer Enclosure
- Custom molded 10" subwoofer enclosure
- 100% fiberglass construction
- For use with:
- 2008-13 RZR 800
- 2010-14 RZR S
- 2011-14 RZR XP 900
- 2012-14 RZR 570
- 2010-14 RZR 4
- 2013-14 RZR XP900 4
- 2013 RZR Jagged X
- Easily bolts into the under dash area to utilize the empty space behind the glovebox
- Black texture coat finish matches Commander textures
- Can be custom painted to match your color scheme
- Comes with stainless mounting hardware
- Speaker Cutout Diameter: 9.125"
- Speaker Size: 10"
- Cutout Diameter: 8.875" (225.425 mm)
- Max Depth: 5"
- Airspace: 0.68 cu. ft.
- Length: 18
- Width: 14.5
- Height: 14
Advantages of purchasing from an authorized seller:
- Best prices - We sell all SSV Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by SSV product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase SSV from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Authorized SSV Works Dealer!
Description of SSV-10M:
Our premium Marine subwoofer started the revolution. They produce great volume and clarity for the price and are very reliable. - 10" 600 watt (300w RMS) woofer
Features:
- SSV WORKS 10M 10" 600W Waterproof Subwoofer 4 Polaris RZR/ATV/UTV/Cart/Jeep
- RMS Power Handling : 300 Watts
- Peak Power Handling: 600 Watts
- Impedance : SVC 4 Ohm
- Sensitivity : 87.56 dB
- Mounting Depth : 4.63" inches
- Mounting Diameter : 9.19" inches
- Min Sealed Box Vol : 0.30 cu. Ft.
- Max Sealed Box Vol : 1.10 cu. Ft.
Description of TPS-A500.1:
Hifonics THOR compact 500 watt mono Powersports amplifier to for a subwoofer with on-board equalization and simple instalation with quick release connectors.
Features:
- Hifonics TPS-A500.1 500w Mono Marine Sub Amplifier For Polaris RZR/ATV/UTV/Cart
- Marine Grade Protection: YES - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage - Special preamplifier reduces incoming noise from source units dramatically improving sound quality
- Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode: Mono operation - Designed to power 1 subwoofer or subwoofer system
- Crossover / Signal Shaping: LPF - Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
- Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: YES - Water resistant for durability in any environment
Specifications:
- Class: Full Range Class D
- Variable Voltage: 0.2V~9V
- Signal to Noise Ratio: >100dB
- Frequency Response: 10Hz-300Hz
- Crossover Type: Electronic 12dB Per Octave
- Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz
- Bass Boost: 0-12dB@45Hz
- Subsonic Filter: 60Hz
- Power @ 2-Ohms: 1 x 500W
- Power @ 4-Ohms: 1 x 250W
- Total Channels: Mono
- Audio Inputs: RCA
- Power Terminal 12v/GND: Molex 10 ga
- Speaker Terminal Wire Gauge: Molex Plug Connector
- Fusing: 1 x 30 Amps
- Certifications: Marine & Powersports
- Dimensions: 3.70 X 5.51 X 1.77 inches (9.4 X 14.0 X 4.5 cm)
- Weight: 2.09 lbs (0.95 kg)
All about your RGHR2:
How To Set Up Your RGHR2:
Included In The Box:
- Marine Digital Media Receiver
- Wired Remote with 32.8 foot wire
- USB Extension Cable (40 inches)
- Mounting Bracket
- Screws
- ISO Wiring
- Owner Manual and Warranty
Description:
The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.
Crazy loud!
We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.
Included wired remote
Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.
Latest listening features
The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.
Ability to connect multiple external amps
This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplify your speakers and a subwoofer amplifier.
Features:
- Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
- Fits into a standard Gauge-Hole (Tachometer) Opening
- Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
- Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
- IP66 Waterproof Certification (Tested to withstand the elements)
- USB Input to play back audio files store on a USB thumb drive or any other USB device
- RCA Aux Input
- AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
- Bluetooth built in to stream audio from any Bluetooth enabled device
- USB Input Charges Your Phone
- Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
- Big easy to use buttons
- Backlit LCD display
- Wired Remote Control Included (normally $50)
- Required Cutout: 2.96" (diameter) x 2.75" (depth)
- USB is 500mA and 5V and supports 16GB max
- Dimensions:
- 2.96" cutout mounting diameter
- 4.45" diameter top plate
- 3.9" mounting depth (not including top plate)
- 5.0" depth including the top plate
- Specs of the built in amplifier:
- TDA7851L quadbridge power amplifier
- 4 x 72 watts peak @ 2 ohm
- 4 x 48 watts peak @ 4 ohms
- 4 x 28 watts RMS @ 4 ohms
- Highly efficient even when running at 2 ohms!
- Low distortion even at top volumes
- UPC:
- 613815662259