- (1) Memphis Audio MOJO615D2 15" 4400 Watt Competition Car Subwoofer DVC 2 ohm Sub
- (1) Rockville RBS15 Big Single 15" SPL Side Vented Car Sub Enclosure Box 4.4 Cu Ft
- (1) Rockville Rockmat RM36-B 36 Sq Ft Butyl Rubber Sound Dampening/Deadening Car Kit
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Description of MOJO615D2:
MOJO6 subwoofers are the most powerful earthshaking subwoofer in the Memphis line. Capable of handling massive amounts of power and shelling out thunderous bass, the MOJO6 subwoofers is the most impressive Memphis subwoofer to ever hit the street.Features:
- Memphis Audio MOJO 615D2 15" 4400 Watt Competition Car Subwoofer DVC 2 ohm Sub
- Vented cast aluminum basket
- 4-layer CCAW 3.5" voice coil
- 235oz magnet
- Fiberglass reinforced cone
- Double stitched rubber surround
- Reinforced double spider
- Heat dissipating aluminum heat sink
- Single sided terminal block
- Size (in): 15"
- RMS Power (w): 2200
- Peak Power (w): 4400
- Sensitivity (dB): 85
- Magnet Size (Oz): 235
- Mounting Depth (in): 9.44
- Cut Out Diameter (in): 14.01
- Voice Coil Diameter (in): 3.5
- Warranty: 1
TS Parameters:
| THIELE SMALL PARAMETERS | |
| Resonant Frequency (fs) | 34.7 Hz |
| Mechanical Q | 5.028 Qms |
| Electrical Q | 1.064 Qes |
| Total Q | 0.878 Qts |
| Sensitivity | 85 dB |
| Xmax Linear | 0.669 in. |
| Displacement | 0.529 cf. |
| Air volume of suspension (Vas) | 50.994 cf. |
| Moving Mass (Mms) | 438.533 g |
| Suspension Compliance (Cms) | 0.048 mmN |
| Effective piston area (Sd) | 865.7 SqCm |
| Motor Strength (Bl) | 9.739 TM |
| VOICE COIL & MAGNET | |
| Impedance Series | 4 ohms |
| Impedance parallel | 1 ohms |
| Voice coil diameter | 3.5 in. |
| RMS Power | 2200 Watts |
| Peak Power | 4400 Watts |
| Magnet weight | 235 oz |
| Magnet diameter | 8.66 in. |
| PHYSICAL DIMENSIONS | |
| Mounting depth | 9.44 in. |
| Cutout Diameter | 14.01 in. |
| Frame Outside Diameter | 15.51 in. |
| ENCLOSURE RECOMMENDATIONS | |
| Single sub sealed | 3.5 cf. |
| Dual subs Sealed | 7 cf. |
| Single sub vented | 5.5 GROSS cf. |
| Port dimensions | 15.5" x 3" x 15.5"L |
| Tuning frequency | 36 Hz |
| Dual sub vented | 11 GROSS cf. |
| Port dimensions | 15.5" x 6" x 31"L |
| Tuning frequency | 36 Hz |
Description:
The RBS15 single Vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RBS15 Big Single 15" Vented Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
- Tuning Frequency: 37 Hz
Enclosure Measurements:
- Type of Enclosure: Vented
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 18" L x 32" W x 18 H"
- Top and Bottom Depth: 18"
- Mounting Depth: up to 15.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 5.35 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 4.4 Cubic Feet
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Video of RM36-B:
Unboxing Video of RM36-B:
Includes:
- 36 Square Foot Roll of Rockmat Sound Dampening Material
- Roller for a perfect installation
The Rockville Rockmat RM36 sound dampening material is a must have for any professional car audio install. This package includes 9 sheets that are each 4 square feet. This gives you a total of 36 square feet. We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.
Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.
Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality gear over here at Rockville!
Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.
We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.
Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!
To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!
Features:
- Rockville Rockmat RM36-B 36 Sq Ft Butyl Rubber Sound Dampening/Deadening Car Kit in black
- 100% butyl rubber material with an aluminum heat resistant coating! (no asphault in our sound dampening material!!!)
- Contains a big roll of 36 feet so you can cut as needed!
- Paintable Surface
- Multi purpose is ideal for multiple applications including rear decks, doors, floors, any part of the trunk, roofs, quarter panels, hoods, etc.
- Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by
- Eliminates sound leakage!
- Improves Bass Quality and Reduces Bass Distortion
- Kill unwanted noise, rattles, vibrations
- Reduce exhaust and engine noise
- Aluminum-coated for heat-resistance
- 72mil thickness
- Full car installation reduces unwanted noises 5-8 dB
- We use the highest quality high-tack self-adhesive to make your installation quick and easy!
- Our model has new and improved increased flexibility for an easier installation and top sound quality!
- Permanent installation with ability to withstand even the highest temperatures!
- Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
- Sticks to any surface
- Designed and engineered by Rockville USA!
- Manufactured with the newest state-of-the-art machinery using only the purest raw materials as well!
- Every product is checked during production for consistency. We have very high quality standards!
- We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
- Available in both black and silver
Specifications:
- Roll Dimensions 18" x 288"
- Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
- Reduces unwanted noises 5-8 dB
- Adhesive temperature range of -100F to 300F (-60C to 150C).
- High-Tack Self-adhesive
- Material Color: Black
- Weight: 25 (Lbs.) per box
- Shipping weight: 26.19 LBS
- Shipping Dimensions: 22.64" x 14.57" x 3.54"
- Trunk Lid+4-Door Noise/Sound Dampening Deadening Car Audio Matt Kit
Features of roller:
- Made of high quality Wood & Steel
- Designed especially for use in installing sound dampening material
- Length: 7 in
- Handle Length: 5 in
- Roller Diameter: 1.3 in
- Material Color: Black
- Weight: 0.44 Lbs.
- UPC:
- 613817003180
