- (1) Pair of Polk Audio MM522 5.25” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- (1) Rockville Rockmat RM2 (2) 12x12" Butyl Rubber Sound Dampening/Deadening Car Kit
- (1) Rockville RPB27 20w Rugged Portable Waterproof Bluetooth Speaker w Bumping Bass
- (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
Authorized Polk Dealer!
Description of MM522:
The Premium Upgrade
Tuned for the total sonic accuracy you get in a studio monitor speaker, the MM1 Series reconfigures this high-quality sound for an on-the-go experience that’s way beyond anything you’ll hear in an OEM factory setup.
Engineered for High-Performance Sound
Every element of the MM Series is meticulously engineered for high-performance sound—Dynamic Balance technology, pivoting 1” terylene tweeter, lightweight neodymium motor structure, high-temp Conex spiders and oversized voice coils for increased
power handling.
Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass reinforced ABS basket, epoxy coated crossovers, water-proof inner and outer surrounds, weep holes for proper drainage and titanium-plated cones, you get extra, long-lasting protection— that’s all salt-fog and UV tested.
Dynamic Balance Technology
Patented process that guides material selection through rigorous testing that identifies and cancels out unwanted resonant frequencies.
Included:
- Two 5.25" coaxial speakers
- 2 grilles
- Mounting hardware
- Wiring harness
Features:
- 2) Polk Audio MM522 5.25” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- Driver Compliment: 5.25" (133.35 mm)
- Tweeter Complement: 1" (25mm)
- Cutout Dimensions: 4.61" (117mm)
- Mounting Height: 0.20" (5.07mm)
- Mounting Depth (Top): 2.37" (60.1mm)
- Mounting Depth (Bottom): 2.57" (65.2mm)
- Peak Power Handling: 300 Watts per speaker
- Continuous Power Handling: 100 Watts per speaker
- Nominal Impedance: 4 Ohms
- Grille Height: 0.92" (23.3mm)
- Frequency Response: 50Hz-40kHz
- Sensitivity: 92 dB
- Magnet Weight: 0.8/0.31 oz
- Magnet Material: Neodymium
- Magnet Size: 24.7mm x 5mm x 10/24.5mm x 5mm x 4mm
- VC Diameter: 1"
Videos of RM2:
Includes:
- 2 Sheets of Rockmat Sound Dampening Material (12” x 12”)
The Rockville Rockmat RM2 sound dampening material is a must have for any car audio speaker install. We all love a good car stereo, but nothing is worse than hearing things rattle. Our Rockmat RM2 speaker package is the perfect solution to eliminate unwanted noises. This package includes 2 sheets that are each 12” x 12” inches per sheet. Installation is quick and easy! You simply cut a hole out of the middle of each sheet and place the Rockmat around your speaker installation area. Another installation option is to cut the 12 x 12 sheet in half and then cut a half circle into each half then install one sheet on each side of each speaker.
Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.
Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. The other products on the market like most of the GTMAT series for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of 100% butyl rubber and an aluminum heat resistant shield which is the same as many of the more expensive brands out there that sell for twice our price.. We only make top quality gear over here at Rockville! These are comparable to the ONYX series by GTMat. (Only we sell it for the price of their lower series!).
Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.
We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.
Installation
Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area.
Rockmat is
pressure sensitive so after you apply the material into your desired
area; apply
pressure to it. That is it! Installation takes only minutes! Please
note our
Rockmat is also easy to cut into the desired shape you need!
To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!
Features:
- Rockville Rockmat
RM2 Sound Dampening Speaker Deadening Kit (2) 12" x 12" Sheets
- Easiest
installation!
- Tested to work
better than leading brands of sound dampening
- Paintable Surface
- Speaker kit for
(2) speakers (Each speaker requires 2 sheets)
- Increases SPL –
The use of our Rockmat will not only make your sound more clear and
eliminate distortion but it will make your music louder by eliminating
sound leakage!
- Kill unwanted
noise, rattles, vibrations
- Aluminum-coated
for heat-resistance
- 72mil thickness
- Increased
flexibility
- High tack
permanent self-adhesive to make your installation quick and easy!
- Our model has new
and improved increased flexibility for an easier installation and top
sound quality!
- Permanent
installation with ability to withstand even the highest temperatures!
- Waterproof
material! Our material is very durable. It is waterproof, heat proof
and flexible
- Sticks to any
surface
- Designed and
engineered by Rockville USA!
- Manufactured with
the newest state-of-the-art machinery. We use only the purest raw
materials as well!
- Every product is
checked during production for consistency. We have very high quality
standards!
- We use 100% high
quality butyl rubber which gives amazing sound insulation and shock
absorption (we do not use any asphalt in our product!)
- Available in both black and silver
- Dimensions per
sheet: 12" inch Length x 12" inch Width x 0.07' sheet Depth
- Raw Material: 90%
high absorbent butyl rubber and 10% pure-grade aluminum
- Reduces unwanted
noises 5-8 dB
- Adhesive
temperature range of -100F to 300F (-60C to 150C).
- High-Tack Self-adhesive
- Material Color:
(Silver)
- Weight: 1.32 Lbs.
- Unit Dimensions: 12.4” x 12.4” x 0.47” inch
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem.
Videos of RPB27:
Includes:
- Bluetooth Speaker
- Aluminum Carabiner Clip – to clip speaker to your backpack
- String to hang from a showerhead or tie to a backpack
- MicroUSB Charging Cable
- User Manual and Warranty Card
The RPB27 is a portable Bluetooth speaker that is the perfect size and power. This speaker is big enough that our engineers were able to get the speaker to produce 20 watts of power with huge bass! It is small enough to bring it with you camping, hiking, or anywhere else. The speaker is extremely rugged! It is shockproof and IPX6 water resistant. This means you can throw it around and bring it in the shower and the speaker will never break!
There may be some similar looking Bluetooth speakers on the market but this is the only speaker at this price point that is rugged, water resistant, and has huge power with huge bass!
Below is what makes ours better:
IPX6 Water Resistant
The RPB27 is water resistant, or splash proof. You can take it with you into the shower, or by the pool side. In reality this speaker can be thrown into water without getting damaged, but we are rating it as splashproof. I tested it in the shower and put it under the showerhead with no problems.
Amazing Power with Bumping Bass!
This speaker puts out a huge 20 watts of power. Its louder than any other speaker I have tested that was similar in size. I’ve tested many Bluetooth speakers, and this one sounds better than speakers that are way bigger! Our sound quality is amazing. This speaker has great bass and crystal clear highs with a distortion rating of less than 1%. What makes the bass so loud is that the speaker has a passive radiator to enhance the bass. That basically mean the speaker has an extra subwoofer built in that focuses on playing back bumping bass!
Rugged Design
Built with 100% ROHS Silicone & ABS, this enclosure design delivers top of the line sound quality. It includes rubber feet for great sound when placing the speaker on any hard surface. The design mold is an exclusive Rockville design!
Huge Battery Life
This is a big advantage with our unit. We use a high quality original 1,000 mAH battery rated for 18 hours of playback with a charge time of 4-5 hours.
Amazing Bluetooth Integration
This uses the latest and most reliable Bluetooth chip. It has Bluetooth 4.1 technology with enhanced data rate and a range of 40 feet! This guarantees a crystal clear signal even when you are away from the unit. Pairing your phone or other Bluetooth enabled device is super easy! There is no password required. Simply turn the unit on and it automatically connects to your device.
Tons of Applications:
- Shower Speaker
- Desktop speaker at work or home
- Hiking
- Camping
- Pool or beach
- Kitchen speaker
- Laptop, iPad, computer speaker
Features:
- Rockville RPB27 rugged waterproof portable Bluetooth speaker with 20 watts power
- IPX6 Water Resistant
- 20 watts peak power
- 10 watts continuous RMS
- Battery charges with included USB cable
- 1000 mAH battery supports 18 hours of playback! This battery lasts longer than almost any other on the market!
- Charge time: 4-5 Hours
- Our speaker has the loudest bass from any competing Bluetooth speaker!
- Extremely loud, powerful, and rugged
- Material: 100% ROHS Silicone & plastic – This enclosure design delivers top of the line sound quality
- Perfect for camping, hiking, pool, beach, shower, bedroom, iPad/Laptop speaker, kitchen and many other applications
- Includes Aluminum hook to latch it onto a backpack, pocket book, etc
- Bluetooth version. 4.1 with EDR (Enhanced Data Rate)
- A2DP audio streaming 40 foot max Bluetooth range
- Playback Controls - Play, Pause, Skip Forward, Skip Back, Volume Up, Volume Down
- Will control next song, pause, play on popular apps like Pandora, Spotify, and others
- Can control next song, pause, and play from the Bluetooth speaker
- The built-in mic allows you to speak through the device so you can make and receive phone calls hands-free
- Rugged and Shockproof!
- Rubberized impact-resistant silicone feet for great sound when placing speaker on any hard surface
- Compatible with any Bluetooth devices such as iPad, iPhone, Laptops,
Android phone, other cell phones, iPods, other Bluetooth MP3 Players
- Distortion: Less than 1 %
- Natural sound with enhanced bass response
- Frequency Response: 145HZ-18KHZ
- Dimensions of Unit (inches): 6.22” x 2.1” x 2.44”
- Unit weight: 0.77 lbs
Includes:
- DJ1500 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼” adapter
Video of DJ1500:
Description:
Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphones are tailor made to meet the demanding needs of today’s DJs. The DJ1500 features large over-the-ear swiveling cups with superbly comfortable foam ear pads (interchangeable soft suede or leather finish cushions included) that seal tight around the ear for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering an extended frequency range and incredible bass response. You’ll hear pronounced vocals; rich, deep bass, rich mids, and crisp highs that will make mixing tracks a breeze. We’ve also incorporated exclusive sound isolation technology which helps to greatly reduce background noise.
The DJ1500 features a clean modern look with ergonomically designed ear cups that swivel 45° up and can flip around 180°. The headband is made of soft supple leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. Improved rugged swivel joints can withstand the rigors of daily use and provide years of carefree use. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. We also provide a hard leather case to store and protect your new investment when you are on the go.
With deep bass response, optimal sound reproduction, and a sleek modern design the DJ1500 will quickly become your first choice whether spinning wax at the club or practicing your mixing techniques at home.
Features:
- Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional DJ Headphones
- 40mm Neodymium drivers
- Ergonomically designed large over-the-ear swivel cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 47” coil cable made of 100% Oxygen Free Copper (158” fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼” adapter
- Hard leather carrying case
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 100±3dB
- Impedance: 32ohm
- Frequency Response: 8Hz – 22KHz
- Max. Power: 800MW
- Rating Power: 400MW
- Net Weight: 290g (with cable)
- UPC:
- 613815936602