Package Includes:

• (1) Pair of Polk Audio MM522 5.25” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
• (1) Rockville Rockmat RM2 (2) 12x12" Butyl Rubber Sound Dampening/Deadening Car Kit
• (1) NYC Acoustics NPB3 Dual 4" 30w Bluetooth Boombox Speaker w/USB, SD, LED+Remote
• (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad

---

Authorized Polk Dealer!

Description of MM522:

The Premium Upgrade
Tuned for the total sonic accuracy you get in a studio monitor speaker, the MM1 Series reconfigures this high-quality sound for an on-the-go experience that’s way beyond anything you’ll hear in an OEM factory setup.

Engineered for High-Performance Sound
Every element of the MM Series is meticulously engineered for high-performance sound—Dynamic Balance technology, pivoting 1” terylene tweeter, lightweight neodymium motor structure, high-temp Conex spiders and oversized voice coils for increased
power handling.

Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass reinforced ABS basket, epoxy coated crossovers, water-proof inner and outer surrounds, weep holes for proper drainage and titanium-plated cones, you get extra, long-lasting protection— that’s all salt-fog and UV tested.

Dynamic Balance Technology
Patented process that guides material selection through rigorous testing that identifies and cancels out unwanted resonant frequencies.

Included:

• Two 5.25" coaxial speakers
• 2 grilles
• Mounting hardware
• Wiring harness

Features:

• 2) Polk Audio MM522 5.25” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
• Driver Compliment: 5.25" (133.35 mm)
• Tweeter Complement: 1" (25mm)
  
• Cutout Dimensions: 4.61" (117mm)
• Mounting Height: 0.20" (5.07mm)
  
• Mounting Depth (Top): 2.37" (60.1mm)
  
• Mounting Depth (Bottom): 2.57" (65.2mm)
  
• Peak Power Handling: 300 Watts per speaker
  
• Continuous Power Handling: 100 Watts per speaker
  
• Nominal Impedance: 4 Ohms
• Grille Height: 0.92" (23.3mm)
  
• Frequency Response: 50Hz-40kHz
  
• Sensitivity: 92 dB
• Magnet Weight: 0.8/0.31 oz
• Magnet Material: Neodymium
• Magnet Size: 24.7mm x 5mm x 10/24.5mm x 5mm x 4mm
• VC Diameter: 1"

---

Videos of RM2:

Includes:

• 2 Sheets of Rockmat Sound Dampening Material (12” x 12”)

The Rockville Rockmat RM2 sound dampening material is a must have for any car audio speaker install. We all love a good car stereo, but nothing is worse than hearing things rattle. Our Rockmat RM2 speaker package is the perfect solution to eliminate unwanted noises. This package includes 2 sheets that are each 12” x 12” inches per sheet. Installation is quick and easy! You simply cut a hole out of the middle of each sheet and place the Rockmat around your speaker installation area. Another installation option is to cut the 12 x 12 sheet in half and then cut a half circle into each half then install one sheet on each side of each speaker.

Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.

Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. The other products on the market like most of the GTMAT series for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of 100% butyl rubber and an aluminum heat resistant shield which is the same as many of the more expensive brands out there that sell for twice our price.. We only make top quality gear over here at Rockville! These are comparable to the ONYX series by GTMat. (Only we sell it for the price of their lower series!).

Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.

We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.

Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!

To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!

Features:

• Rockville Rockmat RM2 Sound Dampening Speaker Deadening Kit (2) 12" x 12" Sheets
  
• Easiest installation!
  
• Tested to work better than leading brands of sound dampening
  
• Paintable Surface
  
• Speaker kit for (2) speakers (Each speaker requires 2 sheets)
  
• Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by eliminating sound leakage!
  
• Kill unwanted noise, rattles, vibrations
  
• Aluminum-coated for heat-resistance
  
• 72mil thickness
  
• Increased flexibility
  
• High tack permanent self-adhesive to make your installation quick and easy!
  
• Our model has new and improved increased flexibility for an easier installation and top sound quality!
  
• Permanent installation with ability to withstand even the highest temperatures!
  
• Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
  
• Sticks to any surface
  
• Designed and engineered by Rockville USA!
  
• Manufactured with the newest state-of-the-art machinery. We use only the purest raw materials as well!
  
• Every product is checked during production for consistency. We have very high quality standards!
  
• We use 100% high quality butyl rubber which gives amazing sound insulation and shock absorption (we do not use any asphalt in our product!)
  
• Available in both black and silver
• Dimensions per sheet: 12" inch Length x 12" inch Width x 0.07' sheet Depth
  
• Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
  
• Reduces unwanted noises 5-8 dB
  
• Adhesive temperature range of -100F to 300F (-60C to 150C).
  
• High-Tack Self-adhesive
  
• Material Color: (Silver)
  
• Weight: 1.32 Lbs.
  
• Unit Dimensions: 12.4” x 12.4” x 0.47” inch

Owner’s Manual

---

Video of NPB3:

Includes:

• NPB3 Bluetooth Speaker 
  
• Remote Control
  
• Multi-purpose USB Charging Cable with 3.5MM plug to connect to an MP3 player or phone 
  
• User Manual
  
• Warranty Card
  

What makes this item awesome!

Amazing Power and Sound Quality
This speaker puts out a huge 30 watts of power. It’s extremely loud! I always bring a portable Bluetooth speaker to the courts when I play Basketball. I was frustrated that the speaker was never loud enough. That is why I decided to develop the NPB3. It is portable enough to take with you and it is still loud enough so you can hear it outdoors even if you are not sitting right next to it. I showed off this item to the employees here and everyone loved it! One of our people use this to listen to music at their desk. We have to tell them to keep it down because this goes loud enough to disturb our entire customer service team!

LED Lights That Go to the Beat
Each of the woofers has an LED light in it that blinks to the beat of the music. They look really cool with the silver woofers. The blue reflects nicely on the woofer! 

Huge Battery Life
We use a high quality original 1200 mAH battery rated for up to 6 hours of playback with a charge time of 3 hours. 

Amazing Bluetooth Integration
This speaker has Bluetooth 2.1 technology with enhanced data rate and a range of 33 feet! This guarantees a crystal clear signal even when you are far away from the unit. Pairing your phone or other Bluetooth enabled device is super easy! There is no password required.

Multiple Listening Sources
In addition to Bluetooth; the NPB3 features USB/SD playback and you can use the included cable and listen to any devices with a standard 3.5MM headphone jack such as a smartphone or MP3 player.  We also added an AM/FM radio that has great reception quality.

Features:

• NYC Acoustics Dual 4” 30 Watt Bluetooth Boombox Speaker w/LED Lights, USB, SD
  
• 30 watts Peak power
• 10 watts RMS power
  
• Battery charges with included USB cable
  
• Mini USB auxiliary input with included cable to connect smartphones or MP3 players
  
• Built-in AM/FM radio tuner with antenna for amazing reception
  
• 1200 mAH battery supports up to 6 hours of playback!
  
• LED on each woofer that blinks to the beat of the music
  
• Playback time at normal volume: 5 – 6 hours
  
• Playback time at high volume: 3 – 4 hours 
  
• Charge time: 3-4 Hours
  
• Extremely loud, powerful, and compact 
  
• Perfect for camping, beach, bedroom, kitchen and many other applications
  
• Bluetooth version. 2.1 with EDR (Enhanced Data Rate)
  
• A2DP Bluetooth audio streaming 33 foot max Bluetooth range
  
• Automatically remembers and syncs with previously synced devices
  
• Playback Controls - Play, Pause, Skip Forward, Skip Back, Volume Up, Volume Down
  
• Can control next song, pause, and play from the Bluetooth speaker
  
• Compatible with any Bluetooth devices such as iPad, iPhone, Laptops, Android phone, other cell phones, iPods, other Bluetooth MP3 Players
  
• Natural sound with enhanced bass response
  
• Distortion: Less than 1 %
  
• Signal to noise ratio: 80dB
  
• Thick wood speaker enclosure for great sound and extreme durability
  
• Frequency Response: 100HZ – 20KHZ
  
• LED Display screen
  
• Dimensions of Unit (inches): 12.9” x 5.9” x 8.74” 
  
• Shipping Dimensions (inches): 13.78” x 6.5” x 8.7”
  
• Unit weight: 3.37Lbs. 
  
• 90 Day Money back guarantee!

Owner’s Manual

---

About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

---

Includes:

• DJ1500 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼” adapter

Video of DJ1500:

Description:

Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphones are tailor made to meet the demanding needs of today’s DJs. The DJ1500 features large over-the-ear swiveling cups with superbly comfortable foam ear pads (interchangeable soft suede or leather finish cushions included) that seal tight around the ear for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering an extended frequency range and incredible bass response. You’ll hear pronounced vocals; rich, deep bass, rich mids, and crisp highs that will make mixing tracks a breeze. We’ve also incorporated exclusive sound isolation technology which helps to greatly reduce background noise.

The DJ1500 features a clean modern look with ergonomically designed ear cups that swivel 45° up and can flip around 180°. The headband is made of soft supple leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. Improved rugged swivel joints can withstand the rigors of daily use and provide years of carefree use. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. We also provide a hard leather case to store and protect your new investment when you are on the go.

With deep bass response, optimal sound reproduction, and a sleek modern design the DJ1500 will quickly become your first choice whether spinning wax at the club or practicing your mixing techniques at home.

Features:

• Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional DJ Headphones
• 40mm Neodymium drivers
• Ergonomically designed large over-the-ear swivel cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 47” coil cable made of 100% Oxygen Free Copper (158” fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼” adapter
• Hard leather carrying case

Specifications:

• Style: Closed-Back
• Design: Circumaural
• Transducer Type: Dynamic
• Driver: 40MM
• Sensitivity: 100±3dB
• Impedance: 32ohm
• Frequency Response: 8Hz – 22KHz
• Max. Power: 800MW
• Rating Power: 400MW
• Net Weight: 290g (with cable)