- (1) Rockville KRYPTON MF3 1600w Peak / 400w RMS 4 Channel Marine Amplifier Boat Amp
- (2) Pair Rockville RMC65W 6.5" 600 Watt Waterproof Marine Boat Speakers 2-Way White
- (1) Rockville RockerBT Rocker Switch Bluetooth Controller+Aux For RZR/ATV/UTV/Cart
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
- (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin
KRYPTON MF SERIES PRODUCT VIDEO:
What's in the Box:
- Amplifier
- PA microphone
- Birth sheet with tested power
- Owner’s manual
- Mounting Screws
- Warranty
Description:
We took the sound of our Krypton car amps and we added top of the line marine grade parts so that they will last forever and withstand even the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!
This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. In high pass mode we allow you to filter out frequencies between 15Hz - 4K Hz. In full mode you will not be filtering any frequencies. The really cool part is in low pass mode you can use the high pass and low pass mode. So for example you can set the low pass mode to 50 hz, and then you can set the high pass to 15 Hz. In this case you would be playing frequencies in the range of 15-50 Hz on this channel. This would be an example of using the subsonic filter. Another option you have is for midrange speakers, you can use our low pass filter and set it really high. Lets say to 3Khz and then you can set the high pass to 150Hz and your midrange speakers will only play that frequency range. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.
The KRYPTON MF3 is protected by a fully IC controlled circuit which includes mute, delay and soft start technology so that the amplifier will turn on safely every time and protect your speakers from popping.
You will also notice we decided to add a cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time. This is a class A/B amplifier which is what we recommend to get the best sound quality out of full range speakers.
One other cool features about this amp is the marine public address system. Simply plug the microphone into the 3.5mm jack and you are ready to go. The amplifier features talk-over functionality. When the microphone is being used the music will fade to the background until you stop talking into the mic.
Features:
- Rockville KRYPTON MF3 1600w Peak/400w Dyno-Certified RMS 4 Channel Marine Amplifier Boat Amp
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 100 Watts x 4 Channels <1% THD+N
- 4 Ohm: 70 Watts x 4 Channels <1% THD+N
- 4 Ohm Bridged: 200 Watts x 2 Channel
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm: 400 Watts x 4 Channels
- 4 Ohm: 280 Watts x 4 Channels
- 4 Ohm Bridged: 800 Watts x 2 Channels
- Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
- Rustproof Aluminum heat sink with black hairline finish
- Stainless steel end panels are rustproof
- All screws and mounting hardware are stainless steel and rustproof
- Bottom panel is aluminum and rustproof
- Marine public address system with microphone with talkover function
- All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
- All channels on the amplifier are bridgeable
- Digital Voltage Display on Amp
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob)
- Adjustable Low Pass Filter: 40Hz – 4KHz
- Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter)
- Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz
- 2CH/4CH Input Mode Switch
- 8 Volt Preamp Circuitry
- Under Voltage Protection at 10V
- Over Voltage Protection at 16V
- High-Speed MOSFET Power Supply
- Full IC-Controlled Protection Circuitry
- Fully Adjustable 12dB Bass Equalizer
- Adjustable Input Level Control
- Studio-Grade Bipolar Output Stage Transistors
- Mute and Delay Soft Start System
- Status Mode LED Indicators
- Minimum THD at Rated Power: < 0.05%
- S / N Ratio: >90dB
- Frequency Response: 10Hz - 50KHz
- Damping Factor: >85 @ 100Hz
- 25 Amp x 2 ATC Fuses
- Color: Black
- Dimensions: (Lx W x H) 13.1" x 8.7" x 2.2"
Videos of RMC65W:
Includes:
- Pair of 6.5" marine speakers
- 16.4 feet of Speaker Wire
- Mounting Screws
Description:
The RMC series of marine speakers by Rockville are a major upgrade to our old RMS series. Don’t get me wrong we loved our old series, but we strive for perfection. We wanted a speaker that is more durable, more water resistant, can handle more power, and put out better sound quality!
As always we sent our team on a speaker-hunting adventure. We tested countless prototypes until the RMC series was born. We ended up with a speaker that has a lot more bass and mids than any other speaker on the market at this price point. This speaker will destroy all those cheap dual cone speakers, and it will compete with top branded marine speakers on the market today!
These speakers are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!
Rockville engineers care about quality and sound more than anything else. The RMC65W was designed in a molded ABS plastic basket. The polypropylene cone is reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The ½" polymer tweeter puts out incredible sounding highs. The low end bass and mids of these speakers really makes them stand out.
The RMC65W 6.5" marine speakers were engineered to deliver amazing power and sound quality in the outdoors; be it saltwater, freshwater or any other harsh environments. These speakers can withstand tons of abuse and can handle 300 watts peak and 75 watts RMS each. These Rockville speakers comply with the CEA 2031 Loud Speaker Standard. This same rating standard is used by the highest end marine brands in the industry. CEA compliant means you can rest assured that the ratings are 100% legitimate. (We compared these against other brands and although some of these other brands stated higher wattage the Rockville RMC65W speakers were able to handle more than double the power!)
Using only true marine grade components and materials, the Rockville RMC65W speakers are fully marinized against salt & fresh water conditions. They will not get damaged by fresh water, salt water, or moisture. There is also an additional waterproof and UV resistant coating to completely protect the speakers.
The speakers come with everything you need for installation including pre mounted grills and mounting hardware.
Features:
- Rockville RMC65W 6.5” 2-Way 300 Watt Marine Boat Speakers in White
- CEA Compliant Power Ratings
- Power Rating: 300 Watts Peak /75 Watts RMS Per Speaker
- System Power: 600 Watts Combined
- 6.5“ 2-Way Speaker System
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Waterproof and rustproof
- Stainless Steel Terminals
- Molded ABS plastic basket
- Polypropylene Mica Injected Cone
- Rubber Surround
- High quality ferrite magnet
- 13mm (0.5” inch) Polymer Tweeter
- Oversized 1” CCAW Kapton Voice Coil
- Pre-installed mounting screws included
- Perfect for both marine, outdoor, and car use
- Impedance: 4 Ohms
- Frequency Response: 55Hz - 20KHz
- Sound Pressure Level: 91dB @ 1w/1m
- Total Diameter: 7.09”
- Cutout Diameter: 5.31”
- Total Height: 2.48”
- Mounting Depth: 2.48”
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
All About Your RockerBT:
How to install Bluetooth Controller in a UTV:
Description:
The Rockville RockerBT is the best quality Rocker switch Bluetooth controller on the market. Our engineers made sure this unit supports a full frequency range without passing through any distortion or unwanted Bluetooth noises. The advantage of a rocker switch controller is that it takes up no space. This is ideal for ATV’s, UTV,s, Side by sides, boats, golf carts, and more.
Our model has a remote wire output that goes to your amplifier which will automatically turn your amplifier on and off when the Bluetooth controller is on or off.
We also added an aux input and an aux output. The aux input allows you to connect any audio device such as an MP3 player, etc. The aux output will allow you to use this controller together with a receiver that has an aux input so you can add Bluetooth to a receiver that does not have it. However, the majority of applications will use this controller instead of a receiver.
A typical ATV install would consist of this rocker switch as the source unit, an amplifier to give power to your speakers, and 2 or 4 speakers. You can also add a subwoofer and a second amplifier if you choose.
Features:
- Rockville RockerBT Bluetooth controller Rocker Switch
- Aux Input
- Remote Output allows you to turn any amplifier on or off
- Simple 5-Button Operation, - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
- Mounts into a Standard Rocker Switch opening
- 3.5 mm Aux input
- 3.5 mm Aux output
- Volume Controls the Bluetooth & AUX
- Replaces Head Unit and Works with Any Amplifier
- Perfect for Polaris/ATV/UTV/RZR/Golf carts, Boats, and more
- Marine Grade Protection: Meets or exceeds the American Boat and Yacht Council (ABYC) marine electronics standards and the American Society for Testing and Materials (ASTM)
- Bluetooth version 4.0
- Hassle Free Bluetooth Auto-Pairing
- Pre-amp Output
- Power and Ground Connections
- Back Lit Buttons for Easy Use Day or Night
- High quality buttons with a click feel when pressed (Perfect so you can click the button while riding)
- Dimensions: ( W x H x D ) 1.04" x 2.02" x 2.64" (Inches)
l
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25’ Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
Description:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA25 RCA Interconnect Cable
- 25’ Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response
- UPC:
- 613817044480
