Package Includes:

• (1) Pair of Rockville KPS80 8" 3-Way 800 Watt Karaoke/Pro Speakers+Wall Brackets / MDF!
• (1) Rockville SINGMIX 5 V2 2000w Bluetooth Pro/Karaoke/Home Amplifier Mixer Receiver
• (1) Rockville RCC14-100-2 CL2 Rated 14 AWG 100' CCA Speaker Wire In Wall Ceiling 70V
• (2) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables

---

Video of Youtube Karaoke:

---

How to set up your KPS Speakers:

Video of KPS Series Speakers:

Features of KPS80:

• Pair Rockville KPS80 8" 3-Way 800 Watt Karaoke Speakers with Wall Brackets and MDF Enclosure
• Peak Power: 1600 Watts Per Pair (800 Watts Each)
• Program Power: 800 Watts Per Pair (400 Watts Each)
• RMS Power: 400 Watts Per Pair (200 Watts Each)
• 3-Way Speaker with Built-In 3-Way Crossover for Amazing Sound!
• 8” Low Frequency Woofer With 1.37”, 100% Copper Voice Coil and 37 oz. Ferrite Magnet
• 3.85” High Frequency Tweeter With 3.5 oz. Magnet and 0.39" 100% Copper Voice Coil
• 3.85” Mid-Range Speaker with 3.5 Oz magnet and 100% Copper Voice Coil Gives Amazing Sounding Voice
• Tweeter Is Made Of A Special Blend of Iron That Is Tuned To Sound Great For Voice and Music
• 0.6” Inch Thick MDF Enclosure With Built-In Computer Tuned Port For Incredible Sound
• Speaker Weight: 8.8 Lbs. Each
• Woofer Has a Steel Basket OFC 100% Copper Voice Coils and a Paper Cone
• Foam Surrounds for Great Sound Quality
• Aluminum Voice Coil Bobbin
• Metal Speaker Grilles
• Impedance: 8 Ohm
• Sensitivity: 92 dB
• Frequency Response: 60 Hz – 16 kHz
• Banana Speaker Terminals
• Speakers Use Y30 High Grade Magnets
• PTC Protection Circuitry Prevents against Blown Drivers
• Dimension: 18 inch x 9.2 inch x 10.7 inch

---

All About Your SINGMIX 5 V2:

How To Set Up Your SINGMIX 5 V2:

How To Set Up Your SINGMIX 5 V2 to a TV:

Description:

The SingMix 5 V2 by Rockville is our all new 2000 Watt karaoke mixing amplifier that has all the latest and greatest features.

We made the following improvements over our version 1.

This item is more compact  so it takes up less space.

You can control the volume from the remote or from the unit. The last version only aloud you to control the volume from the receiver. 

Improved overall quality by adding 2 more pairs of transistors. 

Big power for professional applications

The SingMix 5 v2 boasts 600 watts RMS and 2000 watts of peak output power. This Professional amplifier is loud enough for medium to large size venues. This model features a quiet cooling fan that will keep this amp running cool even if you play it hard and loud for many consecutive hours. The transformer in this amp is huge! This amplifier weighs in at an impressive 17 LBS! Simply put, this is a beast of an amplifier!

Sound quality

This amp is tuned to give you professional sound quality with almost zero distortion! With individual built-in EQ's for both your music and your microphones you are in complete control. In addition, this amplifier features amazing vocal effects including delay, repeat, and echo controls.

Unmatched playback and expandability options

The SingMix 5 has a wide range of playback options including Bluetooth, USB, SD, and FM radio. It also has (5) ¼" mic inputs (3 on the front and 2 more on the rear). It has (2) RCA Inputs for any audio device like an iPad, Television, DVD player, etc. We also added optical and coax inputs to easily allow you to connect to a TV that does not have an RCA output.

There are 2 sets of RCA outputs. (1) RCA line and record out which allow you to connect a powered sub or another amp and recording device. There is also a Mic output which is a cool feature allowing you to only output the microphones to an external mixer, effects, monitors, etc. 

Inputs and Outputs:

• Front: (3) ¼" mic inputs (additional 2 mic inputs on the rear) 
  
• Front: USB/SD Inputs, built-in Bluetooth, FM radio 
  
• Rear: (2) RCA Inputs 
  
• Rear: (2) MIC inputs (there are also 3 mic inputs on the front) 
  
• optical input 
  
• Coaxial input 
  
• RCA Outputs (1 master line out and one mic out) 
  
• Speaker outputs supports 4 speaker or 2 speaker setups (banana or bare wire)
  

Features:

• Rockville SINGMIX 5 2000 Watt Bluetooth Amplifier/Mixer/Receiver
  
• Speaker Outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or (2) 4 ohm speakers (Terminals are banana or bare wire)
  
• A and B speaker selector options allows you to split the speakers to 2 zones and turn each zone on or off. When both zones are playing it WILL play in stereo
  
• Built in Bluetooth with 35 Foot range
  
• USB input will play music files from a thumb drive or hard drive
  
• SD card playback will play music files stored on a memory card
  
• Precision tuning with metal knobs
  
• Mic mixer: 3 front microphone inputs with volume, tone, and echo control
  
• Additional 2 rear mic inputs
  
• Adjustable bass and treble music control
  
• Adjustable bass, mid, and treble mic controls
  
• Delay and repeat effect controls
  
• Sets of RCA line/REC outputs
  
• Set of RCA mic outputs
  
• Removable 19" Rack mount brackets make this perfect for tabletop use or for rack mount applications (Takes 2.5U rack spaces)
  
• Full function remote gives you easy access to all the important features
  
• Built in pre-amplifier
  
• Built in FM radio with manual tuning, and auto-scan
  
• Built in quiet cooling fan
  
• Bright blue LED display
  
• Perfect for karaoke, DJ, KJ, home, and commercial applications
  
• Rugged metal housing
  
• 110V use only
  
• Unit weight: 17.2 lbs (7.8 kg)
  
• Shipping weight: 22 lbs (10 kg)
  
• Unit dimensions: 16.9 inch x 13 inch x 4.3 inch
  

Specifications:

• RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2)
  
• RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2)
  
• Peak @ 4 Ohm at 10 % THD: 2,000 Watts Peak (1000 x 2)
  
• Peak @ 8 Ohm at 10 % THD: 1,500 Watts Peak (750 x 2)
  
• THD: less than 0.5%
  
• Input sensitivity: 250mv/47Kohm
  
• Frequency response: (20Hz-20KHz): ±2dB
  
• Signal to noise ratio: > 85db
  
• Tone characteristic (100Hz-10KHz) ±12dB
  
• 115V voltage power

Owner's manual

---

All About Your RCC14 Series of Speaker Wire:

How To Set Up Your RCC14 Speaker Wire:

Description:

CL2 rated speaker wire is perfect for commercial or home applications. CL2 means you can safely install it in your ceiling or behind walls. If you are doing a 70V or 100V or 8 ohm installation of wire then this is the perfect product for you.

This speaker wire is CCA (copper clad aluminum). Our CCA will run well because we use 30 % copper and 70 % aluminum. There are other CCA cables on the market that use 10 % or less of copper. OFC cables are better but they cost way more and in many applications there will be no performance difference. You should use OFC cables for long runs or if a lot of power will be running through it.

Each conductor is housed in a color-coded PVC for easy polarity identification. The entire cable is inside of a PVC material that is CL2 fire-safety rated.

Features:

• Rockville RCC14-100-2 CL2 Rated CCA (Copper Clad Aluminum) Speaker Wire For In Ceiling or In-Wall Installation
• 100 Feet
• 14 AWG (American Wire Gauge)
• 2 Conductor
• 30% Copper and 70 % Aluminum wire
• CL2 rated for safe installations in ceilings or walls
• Strands Count: 41 Wires Strand Size: 0.25mm
• Each conductor is housed in a color-coded PVC for easy polarity identification

---

How to Set Up RMC-XLR:

Video of RMC-XLR:

Description:

The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.

You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.

90 Day Money Back Guarantee including return shipping!

If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please.

What's Included:

• Fully metal wired mic
• (2) 100% OFC Copper Mic cables (XLR to ¼” + XLR to XLR )
• Mic clip
• Plastic carry case
• Owner’s manual
• Warranty

Features:

• Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!

Mic Features:

• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB

Case Features:

• High quality plastic carry case protects the mic during transportation
• Comfortably holds microphone and mic cable

Cable Features:

• XLR to ¼” Cable
• XLR to XLR Cable
• 10 Feet each
• 100% OFC oxygen free copper
• Cable delivers crystal clear distortion free signal
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
• XLR cable connectors are very solid and durable

Mic clip Features:

• Heavy Duty Standard Size Microphone Clip
• Stand Mountable
• Solid Plastic Construction with copper inside (part that screws to the mic)
• Black Color