- (1) Pair Infinity KAPPA 8130M 8" 500w 3-Way Premium Marine Speakers w/ RGB Lighting
- (1) Rockville RGHR51 5 Zone Single Din Marine Receiver Bluetooth/Radio/Wired Remote
What's In The Box:
- 2 x 8" (200mm) woofers, pr.
- 2 x Flush mount adapter with Integrated grille, pr.
- 12 x Screw
- 12 x Speed clip
- 1 x Spanner
- 2 x Closed cell foam gasket
- 1 x Twin pin tool
Description:
Infinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity - ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.
Features:
Plus One™ Woofer Cones
Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.
Convertible Design
To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.
Perimeter Illumination
Unique and eye-catching RGB illumination can display seven colors out of the box - or an almost unlimited number of colors when connected to an external lighting controller.
SSI (Switch-Selectable Impedance)
New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)
Mylar Tweeters with Integrated Grilles
Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)
One-piece Polymer basket
The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.
High Sensitivity
A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.
Voicing of Speakers
Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.
Harman Standard Reliability Testing
Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
Infinity at an Affordable Price
This is Infinity - one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world - obviously, this is no coincidence. If you know audio, you know Infinity in your car, your home - why not in your boat?
General Specifications:
- Power Handling: 200 watts RMS, 500 watts peak power
- Sensitivity: 92 dB at 2.83 volts
- Frequency Response: 30 - 22kHz
- Voice Coil Diameter: 1 in. (25.5 mm)
- Impedance: 3 ohm impedance
All About Your RGHR51:
How To Set Up Your RGHR51:
RGHR51 WIRES/INPUTS/OUTPUTS Explained!:
RGHR51 Zones Explained!:
How To Install A Head Unit In Your UTV:
What's In The Box:
- Marine digital media receiver
- Wired remote with zone controls
- USB extension cable (40 inches)
- Mounting Screws for installation
- Waterproof wiring harness for installation
- Owner manual and warranty
Description:
5 Zones!
This marine receiver has 5 zones that each have independent volume controls both from the receiver and from the wired remote which we include. Here is how it works. Zone 1 and Zone 2 are the built in powerful 4 channel amplifier. With the addition of external amplifier(s) you can use the additional 3 zones. Each set of RCA outputs will connect to your external amplifier(s) and you will be able to control the volume level either from the receiver or from the wired remote.
4" TFT display
Our built in 4" TFT display is crystal clear and it makes it easy to navigate your tracks and settings. We also include a rear view camera input as well as an aux A/V input.
Intuitive Screen Display
With the intuitive screen display you can access all your photos, videos and music all in one place. Hold the band button to access photos and videos and songs stored on a USB thumb drive.
Crazy loud!
We used a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.
Latest listening features
The RGHR51 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.
Includes a wired remote!
We include the wired remote inside the box. Most famous brands like to make extra money on the remote, but at Rockville we just include it because we know it will make your experience better. We custom engineered the remote to be able to control basic functions as well as control the volume in each zone!
Features:
- Rockville RGHR51 Single-Din Weather Resistant Digital Media Receiver with 5 Zones that each have independent volume control
- Includes wired remote with the ability to control the volume in each zone
- 4" TFT color display makes it easy to navigate menus
- Built in Bluetooth/USB/AM/FM playback
- Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
- 3 pairs of pre-amp outputs each with independent volume controls
- 5 zones each with volume control (zone 1+2 = built in amplifier, zones 3, 4, 5 are the RCA outputs
- Built in EQ with preset EQ curves (Pop, Classic, Rock, Jazz, Beat, Flat)
- IP66 Waterproof Certification (Tested to withstand the elements)
- USB Input to play back audio files store on a USB thumb drive or any other USB device
- USB plays video
- RCA A/V input to play back a video source
- Rear camera input
- RCA Aux Input
- AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
- Bluetooth built in to stream audio from any Bluetooth enabled device
- USB Input Charges Your Phone
- Big easy to use buttons
- IP66 waterproof level
- Meet ASTM B117 and ASTM D4329 standards
- Humiseal coated PCB board for waterproofing and protection from the elements
- USB is 500mA and 5V and supports 16GB max
- Specs of the built in amplifier
- TDA7850 power amplifier built in
- Low distortion even at top volumes
Specifications:
- Standard single din mounting: 1.97" Mounting Height x 3.94" Mounting Length (Inches) (this is the required mounting cutout)
- Mounting Depth: 3.23" (Inches)
- Front face plate: 7.87" L x 3.94" H (Inches)
- UPC:
- 613825729058
