- (1) AKG K275 Over-Ear Closed-Back Foldable Recording Monitoring Studio Headphones
- (1) Rockville RCM PRO Studio/Recording Condenser Microphone w Samsung Capacitors
- (1) Rockville RockShield 1 Studio Microphone Isolation Shield w/Sound Dampening Foam
Description of K275:
The K275 Studio line headphones offer 50mm transducers—the largest in their class—to create greater low-frequency extension and detailed bass reproduction. A 3-axis hinged foldable chassis houses foldable ear cups and a self-adjusting headband create the fatigue-free listening experience pioneered by AKG.
Features:
- On-ear, Closed-Back design
- Largest in-class 50mm drivers, 32 Ohms
- Extended frequency range; 16 Hz – 28 kHz, 109 dB SPL
- Detachable coiled cable with replaceable ear pads
- Slow-retention foam ear pads for comfort and isolation
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM PRO:
What's in the Box:
- (22 gauge, 10 feet) XLR to XLR Cable - To connect to the phantom power input on your mixer or interface
- (22 gauge, 10 feet) 3.5mm to XLR Cable - To connect the microphone to your computer
- Metal Shock Mount
- Large Wind-Screen/Pop-Filter
- Owners Manual
- Warranty Card
Description:
Introducing, the Rockville RCM PRO, our newest high-quality, professional studio/recording condenser microphone! With it's large diaphragm it provides smooth, natural sound and low noise, it also delivers great bass, mids, and highs on all of your recordings. This microphone is very sensitive to incoming sounds to give you the best possible sound! In addition, it includes a 25mm cartridge that allows for a bigger pickup area to pick up incoming sound. The cartridge is the most important aspect that determines the sound quality, and the RCM Pro has one of the best quality cartridges available for any microphone under $150. This microphone sounds better than other name brand microphones that cost twice the price!
The body of the microphone is made of a special zinc metal material. The super strong construction prevents noises from shocks and vibrations. This is especially important when recording loud music including drums and bass. The microphone head is made of strong, high quality steel and features a one-piece microphone head design. Most microphones will have a microphone head that is 2 pieces glued together. Our one-piece microphone head ensures longer life, and better durability. In addition, it helps to eliminate unwanted vibrations that may occur. This microphone has two capacitors (22µ50V and 47µ16V). We used Samsung capacitors from Korea, which are the highest quality capacitors on the market. These are important to help stabilize the voltage so that your recordings are consistent throughout, even if there are sudden changes in the volume or frequency ranges. We compared this microphone to the 3 most famous brands of microphones and the RCM PRO outperformed similar microphones that sell for over double the price!
Features:
- Rockville RCM PRO Professional Studio/Recording Condenser Microphone
- Best Applications: Home-Studio, Recording Studio, Broadcasting, Podcasts, Live Performances, and much more!
- Large diaphragm for smooth, natural sound and low noise
- 25mm Large Cartridge - Allows For Bigger Pickup Area
- Two Large Capacitors: 22µ50V and 47µ16V
- Large Diaphragm - Provides Smooth Natural Sound, and Great Bass, Mids, & Highs
- High SPL Handling and Wide Dynamic Range
- Cardioid Polar Pattern Reduces Pickup of Sounds From Sides and Rear, Reducing Unwanted Noise
- Element: Fixed-charge back plate, permanently polarized condenser
- Microphone Head is Made of High Quality Steel featuring One-Piece Head Design
- Microphone Body Is Made of Special Zinc Metal Material - Prevents Noise From Shock and Vibrations
- Frequency Response: 20Hz - 20 kHz
- Open Circuit Sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz)
- Impedance: 100 Ohms
- Equivalent Noise Level: = 23 dB A (IEC581-5)
- Maximum Input Sound Level: 142dB SPL (THD = 1.0% @ 1 kHz)
- Electrical Current: ?500Ua
- Noise: 20dB SPL
- Dynamic Range (Typical): 124 dB, 1 kHz @ Max SPL
- Signal-to-Noise Ratio: 74 dB, 1 kHz @ 1 Pa
- PCB Layout: Surface Mount
- Fixed Crossover Filter Cutoff Frequency: 50Hz - 16 kHz
- Power Requirements: 48V DC Phantom Power
- Output Connector: 3-Pin XLR
- Product Weight: 0.74 Lbs
- Product Height: 7.44" inches
- Shipping Weight: 3.32 Lbs
- Shipping Dimensions: 13.98" x 7.87" x 3.15"
What's In The Box:
- 3 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter and 3/8” Mic Adapter
- All metal Tripod Desktop mic attachment
How to Set Up Your RockShield 1:
Video of RockShield 1:
Description:
Rockville’s RockShield 1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RockShield1 keeps unwanted outside audio waves and vibrations from affecting your recording. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, while room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a counter top or tabletop. Easy installation and studio quality performance will quickly make the RockShield 1 your go-to sound dampening isolation shield.
Features:
- Rockville RockShield 1 Studio Microphone IsolationShield with Sound Dampening Foam
- Number of Panels: 3 Pieces
- Dimensions Each Panel: 8.2'' x 4.5'' inches
- Dimensions Assembled Unit: 11'' x 4.3” x 16.3” inches
- Keeps Excessive Room ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- 1.5" Thick High Density Pyramid Acoustic Foam
- Front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand Mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8” Die-Cast Metal Threads
- Mic Stand with 5/8” Adapter
- The shield frames are made of high strength die cast aluminum
- Net plates are made of high grade steel
- Net Weight (Without Tripod Stand): 1.1 lbs
- Net Weight (With Tripod Stand): 2.0 lbs
- UPC:
- 613815686712
