• (1) Pair of Rockville RWB65B 6.5" Black Marine Wakeboard Tower Speakers Totaling 500W
  
• (1) Wakeboard Tower Speaker Mounting Screws
• (1) Pair of Rockville RV46.2 4x6" 2-Way Car Speakers 280W/70W RMS CEA Rated
• (1) Rockville R14G50MSW 50 Foot Spool Marine Waterproof 14 AWG Speaker Wire White
  
• (1) Metra 72-1002 Speaker Harness Connector
  

Video of RWB65B:

Advantages:

• No exaggerated power ratings: These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak. (150 watts RMS is equal to about 400 watts rated by other brands)
• New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.

Features:

• Rockville RWB65B Pair of 6.5" WakeBoard Tower Speakers Totaling 500 Watts (250 Watts per speaker)
• 6.5" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• Includes Stainless Steel Mounting Hardware
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage.
• Includes long screws that accommodate Jeep Wrangler and any roll bar
• Includes Stainless mounting hardware that wont rust or corrode
• Color: Black

Details:

• Peak Power Handling: 250 Watts
• RMS Power Handling: 150 Watts
• Frequency Response: 70–20,000 Hz
• Sound Pressure Level: 96dB @ 1w/1m
• Impedance: 4 Ohms
• Mounting Depth: 9"

Includes:

• (2) Wakeboard Speakers
• Mounting Brackets
• Integrated Grill
• Installation Hardware

Extra long mounting screws to mount Rockville Wakeboard Speakers into Jeep Wrangler rollbars. Includes 8 screws. Works with all Rockville wakeboard speakers.

Video of RV46.2:

Description:

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV46.2 2-Way Car Speaker
• Peak Power  Rating: 280 Watts Per Pair/140 Watts Each
• CEA Compliant RMS Rating: 70 Watts Per Pair/ 35 Watts Each
• 4"x 6" Open Basket 2-Way Speaker
• HEX Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• 1” PEI Polyamide Neo Dome Mid/Tweeter
• 1/2” PEI Polyamide Electro Tweeter
• Built-in Capacitor Crossover Network
• Extended Frequency Response Speakers

Details:

• 20 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 6" x 3.4"
• Mounting Depth: 2"
• Frequency Response: 83Hz - 20KHz
• Sensitivity: 90dB @ 1w / 1m
• Includes Complete Pair with Installation Hardware and Color Coded Speaker Wire

Rockville Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Features:

• Rockville R14G50MSW 50 Ft Marine/Boat White Speaker Wire
• Gauge: 14 Gauge
• For Marine Audio Applications
• Waterproof insulation
• Also great for car audio applications
• Stranding: 72x0.15mm x 2C (72 Strands of 0.15mm Wire per Wire)
• Braided Super-Flex Design Ensures Optimum Surface Area and Flexibility
• Delivers Impressive Clarity, Bass Response, and Dynamic Range
• Eliminated Unwanted Noises and Maximizes Signal Transfer
• Color: White
• Marine Grade Wire
• Engineered to withstand daily harsh marine conditions
• protected against corrosion and its soft, flexible PVC jacket surrounds
• excellent signal transfer.
• UL1426 Premium Oxygen Free Copper Boat Cable
• Resistant to extreme cold, salt water, battery acid, oil, gasoline and ultra-violet radiation.
• Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion.
• Drawn copper, unidirectional lay for ultimate in sound quality.
• Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards.
• Using a propriety blend of pure copper wiring and special winding technique, we were able to reduce the "impedance skin effect" reducing noise while maintaining sound purity with minimal to zero impedance gain
• Installation in the tightest of corners are easily conquered, thanks to our Super-Flex insulation. Rockville marine speakers cables are durable, very flexible and easy to use
• The Super-Flex jacket was designed to handle the most extreme conditions
• These wires meet the high-powered demands of amplifiers and speakers. Designed for purity and longevity
• White insulating jacket visually blends smoothly in to marine audio environment

• Metra 72-1002 Speaker Harness Connector for 1984-02 Jeep+Dodge+Cherokee Vehicles
• Chrysler 2-pin flat speaker connector
  
• One kit needed per pair of speakers
• Compatible with the following vehicles:
  
  • Jeep - 1988-1996 Cherokee, 1986-1992 Comanche, 1986-1992 Grand Wagoneer, 1984-1996 Wrangler.
    
  • Dodge - 1994-2002 Ram Pickup