Package Includes:

• (1) Pair of KICKER 43CSC674 6.75" 6-3/4" 600w 4-Ohm Car Audio Coaxial Speakers
  
• (1) Pair of KICKER 43CSC654 6.5" 600w 4-Ohm Car Audio Coaxial Speakers
  
• (1) Rockville R14G500MSW 50 Feet Marine Waterproof 14 AWG Speaker Wire White
• (1) Rockville Rockmat RM2 Sound Dampening Speaker Deadening Kit 2) 12" x 12" Sheets
  
• (1) Metra 82-6600 5.25" & 6.5" Speaker Mounting Bracket Plate+Cherokee
• (1) Metra 72-6514 Speaker Harness Connector for Jeep Cherokee

---

---

Authorized Kicker Dealer!

The CS Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. The CS 6-3/4-Inch Coaxial Speakers are the perfect factory upgrade.

These coaxial speakers are an excellent way to upgrade your sound. A st amped steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology, for the best sonic quality and deep, rich bass. These CS speakers work best with 100 watts of recommended power.

Features: 

• Pair KICKER 43CSC674 6.75" 6-3/4" 300w 4-Ohm Car Audio Coaxial Speakers
  
• Speaker Design: 2 - way
  
• Woofer Size: 6 3/4 in. (165 mm)
  
• Tweeter Size: 1/2 in. (13 mm)
  
• DC Resistance: 3.3 ohms
  
• Peak Power: 300 Watts per speaker / 600 Watts per pair
  
• Continuous Power (RMS): 100 Watts per speaker / 200 Watts per pair
• Recommended Power Range: 10 - 100 watts RMS per channel
• Features EVC™ (Extended Voice Coil) technology - immediate improvement above OEM
• Stamped Steel Frame Basket
• Impedance: 4 ohms
  
• Sensitivity: 90 dB @ 1W, 1m
  
• Effective Frequency Range: 40Hz - 20kHz
  
• Mounting Hole Diameter: 5 1/2 in. (140 mm)
  
• Top Mount Depth: 3/16 in. (4 mm)
  
• Bottom Mount Depth: 1 13/16 in. (47 mm)
  
• Grilles: Yes
  
• Tweeter Magnet Material: Neodymium
  
• Tweeter Dome Material: PEI [polyether imide
  
• Tweeter Design: Balanced dome
  
• Woofer Cone Material: Polypropylene
  
• Woofer Surround Material: Polyester foam

---

Description of 43CSC654

The CS Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability.The CS 6-1/2-Inch Coaxial Speakers are the perfect way to upgrade you factory speakers.

Using zero protrusion PEI tweeters and a thick polypropylene woofer ensures you get every bit of clarity you need, without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.

Features:

• Pair KICKER 43CSC654 6.5" 6-1/2" 300w 4-Ohm Car Audio Coaxial Speakers 
• Speaker Design: 2 - way
  
• Woofer Size: 6 1/2 in. (160 mm)
  
• Tweeter Size: 1/2 in. (13 mm)
  
• DC Resistance: 3.3 ohms
  
• Peak Power: 300 Watts per speaker / 600 Watts per pair
  
• Continuous Power (RMS): 100 per speaker / 200 Watts per pair
• Recommended Power Range: 10 - 100 watts RMS per channel
• Features EVC™ (Extended Voice Coil) technology - immediate improvement above OEM
• Stamped Steel Frame Basket
• Impedance: 4 ohms
  
• Sensitivity: 90 dB @ 1W, 1m
  
• Effective Frequency Range: 40Hz - 20kHz
  
• Mounting Hole Diameter: 4 13/16 in. (123 mm)
  
• Top Mount Depth: 3/8 in. (9 mm)
  
• Bottom Mount Depth: 1 11/16 in. (43 mm)
  
• Grilles: Yes
  
• Tweeter Magnet Material: Neodymium
  
• Tweeter Dome Material: PEI (polyether imide)
  
• Tweeter Design: Balanced dome
  
• Woofer Cone Material: Polypropylene
  
• Woofer Surround Material: Polyester foam 

---

Description of 50 Feet R14G500MSW:

Rockville Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Features:

• Rockville R14G500MSW 50 Ft Marine/Boat White Speaker Wire
• Gauge: 14 Gauge
• Wire Length: 50ft (Cut from a 500 foot spool)
• For Marine Audio Applications
• Waterproof insulation
• Also great for car audio applications
• Stranding: 72x0.15mm x 2C (72 Strands of 0.15mm Wire per Wire)
• Braided Super-Flex Design Ensures Optimum Surface Area and Flexibility
• Delivers Impressive Clarity, Bass Response, and Dynamic Range
• Eliminated Unwanted Noises and Maximizes Signal Transfer
• Color: White
• Marine Grade Wire
• Engineered to withstand daily harsh marine conditions
• protected against corrosion and its soft, flexible PVC jacket surrounds
• excellent signal transfer.
• Tinned wire has superior corrosion resistance.
• UL1426 Premium Oxygen Free Copper Boat Cable
• Resistant to extreme cold, salt water, battery acid, oil, gasoline and ultra-violet radiation.
• Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion.
• Drawn copper, unidirectional lay for ultimate in sound quality.
• Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards.
• Using a propriety blend of pure copper wiring and special winding technique, we were able to reduce the "impedance skin effect" reducing noise while maintaining sound purity with minimal to zero impedance gain
• Installation in the tightest of corners are easily conquered, thanks to our Super-Flex insulation. Rockville marine speakers cables are durable, very flexible and easy to use
• The Super-Flex jacket was designed to handle the most extreme conditions
• These wires meet the high-powered demands of amplifiers and speakers. Designed for purity and longevity
• White insulating jacket visually blends smoothly in to marine audio environment

---

Videos of RM2:

 

Includes:

• 2 Sheets of Rockmat Sound Dampening Material (12” x 12”)

The Rockville Rockmat RM2 sound dampening material is a must have for any car audio speaker install. We all love a good car stereo, but nothing is worse than hearing things rattle. Our Rockmat RM2 speaker package is the perfect solution to eliminate unwanted noises. This package includes 2 sheets that are each 12” x 12” inches per sheet. Installation is quick and easy! You simply cut a hole out of the middle of each sheet and place the Rockmat around your speaker installation area. Another installation option is to cut the 12 x 12 sheet in half and then cut a half circle into each half then install one sheet on each side of each speaker.

Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.

Our Rockmat is built to the highest standards in this industry using butyl rubber as well as heat resistant aluminum.  Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum. We do not cheat our customers. We only make top quality car audio and pro audio equipment over here at Rockville!

Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.

We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.

Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!

To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!

Features:

• Rockville Rockmat RM2 Sound Dampening Speaker Deadening Kit (2) 12" x 12" Sheets
  
• Easiest installation!
  
• Tested to work better than leading brands of sound dampening
  
• Paintable Surface
  
• Speaker kit for (2) speakers (Each speaker requires 2 sheets)
  
• Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by eliminating sound leakage!
  
• Improves Bass Quality
  
• Reduces Bass Distortion
  
• Kill unwanted noise, rattles, vibrations
  
• Reduce exhaust and engine noise
  
• Aluminum-coated for heat-resistance
  
• 72mil thickness
  
• Full car installation reduces unwanted noises 5-8 dB
  
• Increased flexibility
  
• We use the highest quality self-adhesive to make your installation quick and easy!
  
• High tack permanent adhesive
  
• Our model has new and improved increased flexibility for an easier installation and top sound quality!
  
• Permanent installation with ability to withstand even the highest temperatures!
  
• Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
  
• Sticks to any surface
  
• Designed and engineered by Rockville USA!
  
• Manufactured with the newest state-of-the-art machinery. We use only the purest raw materials as well!
  
• Every product is checked during production for consistency. We have very high quality standards!
  
• We use very high quality butyl rubber which gives amazing sound insulation and shock absorption
  
• Available in both black and silver
• Dimensions per sheet:  12" inch Length x 12" inch Width x 0.07' sheet Depth
  
• Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
  
• Reduces unwanted noises 5-8 dB
  
• Adhesive temperature range of -100F to 300F (-60C to 150C).
  
• Stick: Best-Quality Self-adhesive
  
• Material Color: (Black or Silver)
  
• Weight: 1.32 Lbs.
  
• Unit Dimensions: 12.4” x 12.4” x 0.47” inch

Owner’s Manual

---

Features of 82-6600:

• Metra 82-6600 Chrysler 95-10 5.25" & 6.5" Speaker Mounting Bracket Plate+Cherokee
• Made specifically for 5-1/4-Inch or 6-1/2-Inch speakers
  
• Front Door Speaker Adapter
  
• Made from high grade materials for a long lasting secure fit
  
• Makes installation simple
  

---

Features of 72-6514:

• Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
• Quick and easy installation
  
• No cutting needed
  
• Plugs directly into harness
  
• Speaker Harness for Select Chrysler/Dodge Vehicles
  
• No cutting into original wires needed
  
• Plugs into original equipment radio