• (2) Rockford Fosgate Prime 10" Car Audio Subwoofers
• (1) Jeep Wrangler RQJ10D Custom Dual 10" CJ5/CJ7/YJ/TJ/JK Sub Box Sealed Enclosure
  
• (1) Pair of Rockville RV46.2 4x6" 2-Way Car Speakers 280W/70W RMS CEA Rated
• (1) Pair of Rockville RWB65B 6.5" Black 2 Way 500W Marine Wakeboard Tower Speakers
• (1) Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Car Stereo Amplifier
• (1) Rockville RWK42 4 Gauge 4 Chan Car Amp Wire Kit with (2) RCA's
• (1) Rockville RTR172 17 Foot 2 Channel Twisted Pair RCA Cable
• (1) Wakeboard Tower Speaker Mounting Screws
• (1) Metra 72-6512 Speaker Harness Connector + Cherokee
• (1) Metra 82-1011 Jeep Wrangler 4" x 6" Speaker Mounting Bracket Plate
  
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals
  

Features

• Rockford Fosgate R2D2-10 Prime 10" 500 Watt
• Size: 10 inches
• Peak Power: 500 Watts
• RMS Power: 250 Watts
• Nominal Impedance: Dual 2-Ohm
• 12 AWG compression terminals
• Anodized aluminum voice coil former
• Integrated PVC trim ring
• Linear spider with embedded 16 AWG tinsel leads
• Mica injected polypropylene cone
• Optimized for both sealed and vented enclosures
• StampCast basket with integrated spider venting
• Cutout Diameter: 9.125 inches / (232 mm)
• Mounting Depth: 4.319 inches / (109.7 mm)
• Voice Coil Diameter: 2" / (51 mm)
• Magnet Weight: 43 oz / (1.22 kg.)
• Speaker Connector: Dual 12 AWG compression
• Woofer Displacement: 0.039 cu.ft / (1.1 Liters)
• Woofer Displacement: 0.101 cu.ft / (2.85 Liters)
• Shipping Weight: 8.8 Lbs / (3.99 kg)
• Fs (Hz): 34.6
• Re (Ohms): 3.84
• Le (mH): 3.9
• Qms: 6.93
• Qes: 0.50
• Qts: 0.47
• Vas (Liters): 39
• Sd (cm2): 339.8
• SPL (dB @ 1w/1m): 86.9
• Xmax (mm): 6.5
• Sealed - Enclosure
• Vb: 0.59 cu.ft
• F3: 57.5 Hz
• Qtc: 0.75
• Height: 15.75 inches
• Width: 17.5 inches
• Depth: 6.25 inches
• Speaker Cutout: 9.125 inches
• Speaker Depth: 4.319 inches
• Vd: 0.101 cu.ft
• Vented - Enclosure
• Vb: 1.40 cu.ft
• Fb: 43 Hz
• F3: 37.1 Hz
• Height: 14 inches
• Width: 17 inches
• Depth: 15.25 inches
• Np: 1 port
• Dp: 4 inches diameter
• Lp: 13.1 inches long
• Speaker Cutout: 9.125 inches
• Speaker Depth: 6.319 inches
• Vd: 0.101 cu.ft
• Vp: 0.095 cu.ft
• Recommended Enclosure Type: ported or sealed
  
• Minimum Sealed Box Volume: 0.50 cubic feet
  
• Optimum Sealed Box Volume: 0.75 cubic feet
  
• Maximum Sealed Box Volume: 0.85 cubic feet
  
• Minimum Ported Box Volume: 0.70 cubic feet
  
• Top-Mount Depth: 4.57"
  
• Cutout Diameter: 9.13"
  

The RQJ10D is a dual Sealed speaker box Which is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. These enclosures are are coated with bedliner spray making them fully waterproof! They are extremely tough and rugged and will last for an extremely long time. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RQJ10D Dual 10" Jeep Wrangler All Years CJ5/CJ7/YJ/TJ/JK Sub Enclosure
• Dual 10" Sealed subwoofer enclosure
• Hardwood MDF
• Machine precision cut mounting holes
• 3/4" USA Heavy Duty MDF Construction
• Finished w/Bed Liner Spray
  
• Top of the line Glue for extra durable adhesion
• Screw down push button terminals
  
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Fits Directly Behind Rear Seat/Bench
  
• Made in the USA

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 10"
• Dimensions in Inches: 18.5" L x 33.25" W x 12 H"
• Mounting Depth: 7” (inches)
• Mounting diameter (hole size): 9” (inches)
• Wood thickness: 5/8” (inch)
• Air space: 1.25 Cubic feet
• Material: Highest-grade MDF wood on the market

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Video of RV46.2:

Authorized Rockville Dealer!

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV46.2 2-Way Car Speaker
• Peak Power  Rating: 280 Watts Per Pair/140 Watts Each
• CEA Compliant RMS Rating: 70 Watts Per Pair/ 35 Watts Each
• 4"x 6" Open Basket 2-Way Speaker
• HEX Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• 1” PEI Polyamide Neo Dome Mid/Tweeter
• 1/2” PEI Polyamide Electro Tweeter
• Built-in Capacitor Crossover Network
• Extended Frequency Response Speakers

Details:

• 20 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 6" x 3.4"
• Mounting Depth: 2"
• Frequency Response: 83Hz - 20KHz
• Sensitivity: 90dB @ 1w / 1m
• Includes Complete Pair with Installation Hardware and Color Coded Speaker Wire

Video of RWB65B:

• No exaggerated power ratings : These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak. (150 watts RMS is equal to about 400 watts rated by other brands)
• New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.

Features:

• Rockville RWB65B Pair of 6.5" WakeBoard Tower Speakers Totaling 500 Watts (250 Watts per speaker)
• Color : Black
• 6.5" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• Includes Stainless Steel Mounting Hardware
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage
• These Wakeboards Fit bars ranging from 1.26 inches to 2.05 inches and can even fit larger Bars with our optional longer screws
• Includes long screws that accommodate Jeep Wrangler and any roll bar
• Includes Stainless mounting hardware that wont rust or corrode

Details:

• Power Rating : 
• Peak Power Handling : 500 Watts (250 Watts per Speaker)
• RMS Power Handling : 300 Watts (150 Watts per Speaker)
• Frequency Response : 70 – 20,000 Hz
• Sound Pressure Level : 96dB @ 1w/1m
• Impedance : 4 Ohms
• Mounting Depth : 9"

Includes:

• (2) Wakeboard Speakers
• Mounting Brackets
• Integrated Grill
• Installation Hardware

Video of RXH-F5:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
 
The RXH-F5 is a 5 channel high power amplifier with 3,200 Watts peak output, 1600 Watts RMS output (4 x 150 + 1 x 1000 @ 2 Ohms). The CEA-2006 compliant rating is 50 x 4 + 1 x 350 @ 4 Ohms and 75 x 4 + 1 x 500 @ 2 ohms <1% THD.  Most brands do not use CEA compliant ratings because quite simply they do not want you to be able to compare their amps to others on the market. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason we are supplying you with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split second at the highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.

This is a 5 channel amplifier that is essentially 2 amplifiers built into one. There is a 4 channel class A/B amplifier and a mono class "D" amplifier all built into the same heatsink. The recommended configurations are to use the 4 full range channels to power all your interior speakers and then to use the mono channel for 1, 2, or more subwoofers.
 
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXH-F5 features Dual 60 Amp Maxi Fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXH-F5 you are getting your money’s worth and then some. I have only seen 2 other 5 channel amplifiers with a similar fuse rating and power to this one. They both cost over $400! Our amplifier can compete with those ones in power and sound quality!
 
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, mute and delay soft start technology, and a crossover band-pass control. The RXH-F5 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

One last point I want to make about this amplifier is efficiency. The circuitry of the 4 channel part of the amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier. The class "D" channel for the subs is even more efficient than the class A/B channels which is typical. Class "D" is known for its' efficiency. All in all you get the best of both worlds with this amp! You get a rock solid powerful bass amplifier along with an efficient, powerful, and smooth sounding 4 channel class A/B amplifier all packed into a compact and beautifully designed heatsink!
 
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Car Stereo Amplifier 
• CEA Compliant Power Ratings:
  • 4 Ohms: 550 Watts (4 x 50 Watts + 1 x 350) at 4 ohms and 1% THD+N
  • 2 Ohms: 800 Watts (4 x 75 Watts + 1 x 500) at 2 ohms and 1% THD+N
    
• RMS Power Ratings  
  • 4 Ohms: 1100 Watts (4 x 100 watts + 1 x 700 Watts)
  • 2 Ohms: 1600 Watts (4 x 150 watts + 1 x 1,000 Watts)
• Channels 1 through 4 are class A/B and channel 5 is mono class "D"
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors 
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• CH3 & CH4 Low Pass 500Hz - 3KHz
• CH5 Low Pass 50Hz - 250Hz
• CH3 & CH4 High Pass 50Hz - 1KHz
  
• High Level Input Auto Start Smart Turn-On
  
• Full IC-Controlled Protection Circuitry
  
• Remote Dashboard Subwoofer Control
• Fully Adjustable Bass Equalization Control
  
• 2 Ohm Stable Stereo
  
• 4 Ohm Mono Bridgeable
  
• 3 Channel Mixed-Mono Capable
  
• Channel 5 - 2 Ohm Mono Capable
  
• 2 CH / 4 CH / 5 CH Input Mode Selector
  
• Fully Adjustable Subsonic Filter: 15 - 50Hz
  
• Crossover Bandpass Control
  
• Subwoofer Phase Control
  
• Mute and Delay Soft Start System
• 8 Volt Preamp Circuitry
• ELNA Brand Audiophile Quality Capacitors
  
• Status Mode LED Indicator
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: > 100dB
  
• Frequency Response: 10Hz - 40KHz
• Damping Factor: > 200 @ 100Hz
• Dual 60 Amp Maxi Fuse
• Dimensions: (W x H x L) 8.5" x 1.8" x 16.1" 
  

Owner’s Manual

Video of RWK42:

Video for Unboxing RWK42:

Description:

The Rockville RWK42 4 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (2) sets of RCA cables.

Features:

• Rockville RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit
• (2)  17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17 4 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Extra long mounting screws to mount Rockville Wakeboard Speakers into Jeep Wrangler rollbars. Includes 8 screws. Works with all Rockville wakeboard speakers.

Authorized Metra Internet Retailer!

Features:

• Metra 72-6512 Speaker Harness Connector for Chrysler Vehicles 90-07+Cherokee
• Quick and easy installation
  
• No cutting into original wires needed
  
• Plugs into original equipment radio
  
• Compatible with the following vehicles: 
  • Chrysler: 1999-2003 300M, 1995-2000 Cirrus, 1992-1999 Lebaron, 1995-2002 LHS, 1991-1996 New Yorker, 1996-2003 Sebring Coupe, 1995-2001 Sebring Sedan, 1991-2002 Town & Country, 2001-2003 Voyager.
    
  • Dodge: 1991-2003 Caravan, 1994-1999 Dakota, 1993 Daytona, 1998-1999 Durango, 1998-2007 Ram Pick. Eagle: 1993-1997 Vision,
    
  • Jeep: 1997-2001 Cherokee, 1997-2003 Wrangler.
    
  • Plymouth: 1996-2000 Breeze, 1995-2001 Neon, 1984-2000 Voyager
    

• Best prices - We sell all Metra Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Metra product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Metra from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Authorized Metra Internet Retailer!

Features:

• Metra 82-1011 Jeep Wrangler 1997-2006 4" x 6" 4x6 Speaker Mounting Bracket Plate
• Speaker Adapter
  
• Designed specifically for the 1997-2006 Jeep Wrangler
  
• Converts a factory dash speaker location to 4X6-Inch hole
  

• Best prices - We sell all Metra Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Metra product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Metra from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

RCA cables are the backbone of your audio system. They are used for transferring audio and video signals. Without a proper cable and good signal, you can have a distortion, which would hold your system back from performing at its optimal capabilities. Don't ever settle for cheap RCA's because they will not provide a clean signal to your amplifiers or video sources.

These Rockville RCA cables are 100 % copper, and feature advanced technologies like triple shielding, magnetic interference rejection, woven outer shield, and more. The best way to ensure that you’ll have a good setup is to invest in good cables.

Features:

• Rockville RTR172 17 Foot 100% Copper 2-Channel Twisted Pair RCA Cable 
• Oxygen Free Copper
• 100% Oxygen Free Copper
• Premium Audiophile RCA Interconnect Cables
• Split Pin Technology Ensures a Secure Connection
• Outstanding Noise Rejection, Accuracy, and Frequency Response
• Color Coded Channel Identification
• Length: 17-Foot
• Rockville 1 year warranty
• Also Available in: 3-Foot, 6-Foot, 12-Foot, 20-Foot and 25-Foot