Package Includes:

• (1) 2007-2016 JEEP WRANGLER JK 4-DOOR Powered 10" MTX Subwoofer+Sub Enclosure Box
• (2) Pairs of MTX THUNDER65 6.5" 240 Watt 2-Way Car Audio Coaxial Speakers
• (2) Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
• (1) Rockmat 50 SqFt Butyl Rubber Sound Deadener Material Bulk Car Kit

---

Authorized MTX Audio Dealer!

Description of J-WRANGLER-07A:

Amplified Thunderform with a single, hard hitting, ten inch Terminator Subwoofer and integrated 250-watt amplifier. Fits Jeep - 4-Door Wrangler JK 2007-2018. Installs on driver side rear wheel well. Vehicle specific ThunderForm enclosures are designed to utilize space in vehicles that would otherwise go unused to add a subwoofer enclosure. These enclosures are highly durable and provide a custom fit so that you do not have to sacrifice cargo space for added aftermarket performance. This model includes a single 10" subwoofer and integrated 250-watt amplifier for an unbeatable listening experience with a stealthy factory look.

Stock Fit And Look
This Thunderform model is constructed using durable MDF and aviation grade carpet to ensure durability over time. The included 10" subwoofer and integrated 250-watt amplifier that are perfectly matched to ensure peak performance in both factory or aftermarket audio systems.

Note: Models with convertible soft tops will have a fitment issue with the subwoofer location. The top on that side will not sit flat as it will lay on top of the subwoofer enclosure. This issue can be resolved by either removing the soft top or purchasing a 3" spacer and 3.5" 1/4-20 bolt with security head from your local hardware store, which will move the enclosure away from the side of the Jeep allowing the convertible soft top to lay flat.

Features:

• 2007-2016 JEEP WRANGLER JK 4-DOOR Powered 10" MTX Subwoofer and Enclosure
• RMS Power Handling: 250 Watts
• Peak Power Handling: 500 Watts
• Frequency Response: 34 Hz - 140 Hz
• Easy install with perfect factory fit
• Utilize unused space in vehicle
• Molded the same color throughout so scratches won't show
• Easily Integrates with factory audio system
• Available for over 225 vehicles
• Includes installation hardware for an easy, flawless install
• Product Dimensions: 17.8" x 16.31" x 6.56" inches
• Product Weight: 24 Lbs.

---

Description of THUNDER65:

Rich Bass
The THUNDER65 is a 6.5" 2-way coaxial speaker pair that can handle up to 60-watts RMS power. THUNDER speakers are set apart from the "other guys" because of its ability to reproduce low frequencies that other speakers cannot reproduce.

No Subwoofer Required!
The Thunder Coaxials offer unbeatable performance for the price in their class. They provide outstanding low frequency reproduction, easy installation, and are great as factory replacements with or without an additional amplifier. While no car speaker can produce bass like a subwoofer, these speakers truly shine in the lower frequencies. The THUNDER Series Coaxial offers it all. You will have incredibly clear response with the built-in tweeter, and plenty of Low THUNDER response from this speaker's Polypropylene cone. The rubber surround will shrug off the weather and wear that come with living in your car full-time.

Audio Imaging
The THUNDER65 uses a polypropylene woofer that is incredibly durable and a 15 degree pivoting tweeter to assist in obtaining the best imaging based on install location. The speakers concave cone design also assists in delivering exceptional imaging especially when speakers are mounted in the doors of a vehicle. This model includes a high temperature 4-Ohm voice coil and incorporates Spider Plateau Venting to ensure cool air is targeting the voice coil ensuring reliability over time.

Features:

• Pair MTX THUNDER65 6.5" 240 Watt 2-Way Coaxial Car Speakers
• RMS Power Handling: 60 Watts (Per Speaker)
• Peak Power Handling: 120 Watts (Per Speaker)
• Frequency Response: 48Hz - 20kHz
• Cone Material: Polypropylene
• Woofer Mounting Depth: 2..063" inches
• Extended Low Frequency Reproduction: Allows the speaker to deliver a Bigger, Fuller Sound
• Concave Cone Design: Produces Improved Off-Axis Response
• Pivoting Tweeter: To allow for Improved Imaging in Any Installation Location the Tweeter can Pivot 15° in Any Direction

Click here for the Installation Guide

---

Features of 72-6514:

• Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
• Quick and easy installation
  
• No cutting needed
  
• Plugs directly into harness
  
• Speaker Harness for Select Chrysler/Dodge Vehicles
  
• No cutting into original wires needed
  
• Plugs into original equipment radio
  

---

Video of RM50RT-B:

Includes:

• 50 Square Foot Roll of Rockmat Sound Dampening Material (70mil)
• Roller for a perfect installation

The Rockville Rockmat RM50RT-S sound dampening material is a must have for any professional car audio install. This package is a bulk kit which is a big 50 square foot roll. Since this is a big roll you can cut it as needed without wasting any! We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.

Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.

Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum.  Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality gear over here at Rockville!

Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.

We make all our models in 2 color options. You get the choice of black and silver. We decided to tattoo our logo all over the material to make sure our Rockmat has a cool look to it.

Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!

To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!

Features:

• Rockville Rockmat RM50RT-B 50 Sq Ft Sound Deadener Bulk Kit 72 Mil+Roller
  
• 100% butyl rubber material with an aluminum heat resistant coating! (no asphault in our sound dampening material!!!)
  
• Contains a big roll of 50 feet so you can cut as needed!
  
• Multi-purpose is ideal for multiple applications including rear decks, doors, floors, any part of the trunk, trunk, roofs, quarter panels, hoods, etc.
  
• Paintable Surface
  
• Increases SPL –The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by eliminating sound leakage!
  
• Improves Bass Quality and  Reduces Bass Distortion
  
• Kill unwanted noise, rattles, vibrations
  
• Reduce exhaust and engine noise
  
• Aluminum-coated for heat-resistance
  
• 72mil thickness
  
• Full car installation reduces unwanted noises 5-8 dB
  
• Increased flexibility
  
• High tack permanent adhesive to make your installation quick and easy!
  
• Permanent installation with ability to withstand even the highest temperatures!
  
• Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
  
• Sticks to any surface
  
• Our model has new and improved increased flexibility for an easier installation and top sound quality!
  
• Designed and engineered by Rockville USA!
  
• Manufactured with the newest state-of-the-art machinery. We use only the purest raw materials as well!
  
• Every product is checked during production for consistency. We have very high quality standards!
  
• We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
  
• Available in both black and silver
  

Specifications:

• Dimensions of sound dampening material per roll:  18" Wide x 33.3 Feet Long
  
• Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum           
  
• High-Tack Self-adhesive
  
• Reduces unwanted noises 5-8 dB
  
• Adhesive temperature range of -100F to 300F (-60C to 150C).
  
• Material: Butyl rubber
  
• Color: Black
  
• Weight: 36.16 Lbs. (entire roll)
  
• Shipping weight: 37.57 Lbs.
  
• Shipping Dimensions: 22.05" x 8.78" x 9.25" Inches
  

Features of roller:

• Made of high quality Wood & Steel
  
• Designed especially for use in installing sound dampening material
  
• Length: 7 in
  
• Handle Length: 5 in
  
• Roller Diameter:  1.3 in 
  
• Material Color: Gray     
  
• Weight: 0.44 Lbs.

Owner's Manual​