- (1) Rockville HTS8C Pair 8" 1000W Powered Home Theater Speakers Bluetooth/FM/USB/SD
- (1) Pair of Rockville RHSB8 Wall Mount Swivel Home Theater Bookshelf Speaker Brackets
- (1) Rockville APM10C 10" 400 Watt Powered/Active Studio Subwoofer Pro Reference Sub
Videos of HTS8C:
Description:
The Rockville HTS8C is a complete all in one home theater system! You will not need to purchase anything else. This has everything built in! Each speaker has a powerful 8” woofer for incredible bass and a 1" neodymium silk dome tweeter for incredible highs. These speakers have Bluetooth, USB, SD, FM radio, and all of the inputs and outputs you will ever need. We also added a ¼” mic input so this system can be used for karaoke.
With the HTS series by Rockville you get:
- True studio sound in your home! These are the best sounding home theater speakers on the market!
- An entire home theater system all built into (2) speakers! No additional amps, radios, receivers, etc!
- Beautiful design that will enhance the look of any room in your house
- 90 day money back guarantee including return shipping. We know you will love these. If not, we will send you a pre-paid shipping label and return all your money.
Best sound on the market guaranteed!
Rockville’s APM series has been one of the top reviewed and bestselling
studio speakers on the market. What we did was we took the exact same
studio speakers and added Bluetooth, USB, SD, FM radio, and changed all
the inputs and outputs on them to create the ultimate home theater
system! We also added a fully functional remote control. When we say
that these speakers give you studio quality sound, it is more than true!
These are literally the same speakers we sell for studios.
These speakers are bi-amped. What this means is that there is a separate
amp for the highs and a separate amp for the lows! Each speaker has 500
watts peak output power and 125 watts RMS giving you a total of 1000
watts peak and 250 watts RMS per pair. We spent a lot of time developing
the most premium speakers we ever built! I am very excited
to talk to you guys about what we did to make these speakers sound as
good as they do. If you are an audiophile you will find what we did to
be quite amazing. Keep in mind, the only reason our price point is not
300 % higher is because you are buying manufacturer direct. We are one
of the leading speaker manufacturers in the USA, and we have a state of
the art manufacturing process. There is a lot to talk about so I will
break it down into sections.
Description of the enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure.
Professional studios are made of wood for a reason. The sound
characteristics of high quality wood are better than plastic. We only
use the highest quality MDF wood. We do not bother with cheap particle
board material when we want to make the best speakers. The thickness is
0.5” around and the front board is a full 1” thick to give you the best
sound quality possible. The enclosure is built with the perfect amount
of air space to maximize sound quality.
We believe speakers should enhance the look of a room. We make these
speakers in 3 beautiful finishes. Painted black, painted white, and wood
finish. We use “baking paint” made for wood surfaces. It is long
lasting and the best paint for speakers! We went with a beautiful finish
that is mostly matte with a slight shine to it. Our designers spent
countless hours on the color to make sure it is not only beautiful but
elegant as well to improve the appearance of your room. We kept all the
controls on the back of the speaker, which will keep the speaker looking
very modern and elegant. The rear port is built to perfect spec to
enhance the sound. The tweeter has a curved front bezel to make the
highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best
quality components from the most reputable circuit manufacturers in the
world in order to produce crystal clear sound. Most brands do not like
to reveal what’s in the guts of the speaker. We feel differently. We
want you to know what is inside so you realize how good of a value we
are offering and also so that you can understand how good these really
are. We use ADAU 1701 for audio processing and TPA3116 for
amplification. These are both known to be best in class circuit designs.
These components are amazing and allow us to adjust the sound via soft
programing on a computer during the design stage to get the perfect
sound. ADI and TI are the names of the makers of these IC’s. Most people
do not know brand names that make circuits; but these are the most
famous and reliable in the industry. Only very high end manufacturers
like us use these components."
For highs, we use Ferro fluid enhanced 1" neodymium silk dome
tweeters with metal grill protection. If you are an audiophile I am sure
you have tested and love the sound of silk dome tweeters. The neo
magnet is strong and can handle a lot of heat. This enabled us to beef
up the amplifier power without worrying about melting and blowing the
tweeter. The highs sound incredible! I cannot wait for you all
to hear it in person, because I cannot describe how good these sound!
You really need to listen to them in person.
We use an 8” woofer. This will out-perform a 5” woofer any day! The bass
sounds amazing! Very clear and punchy! The woofer has an
injection molded polypropylene cone. This is an engineered type of
plastic that is used on many speakers today. It is strong and puts out great sound. The rubber woofer surrounds increase sound quality and
eliminate unwanted distortion. They sound better than foam surrounds in
my opinion, which is why we went with rubber. The computer optimized
electronic crossover network supplies amazing sounding highs, lows, and
mids. Basically it filters out unwanted frequencies from each component
so that each speaker plays the right frequencies so that the speaker can
go loud without distorting. We use very high-grade crossover filters in
our speakers. The specially wounded voice coils produce accurate
response along the entire frequency spectrum. We developed the speakers
with the most optimized magnet structure, cone, and cabinet space with
the goal of reproducing the sound to play back exactly the way it was
recorded!
Added benefits:
The rear-firing port is shaped and designed by sound engineers to reduce
port turbulence and deliver distortion free top sound quality! Our
factory uses the latest Precision Glue Machine (Over 500 meter Tunnel
Oven). But you may be asking yourself why am I talking about glue? Well, actually, the
glue on speakers is of the utmost importance. If the glue does not hold
up, the speaker will malfunction and blow. We use the latest machinery to
manufacture these speakers. The SPL of the speaker goes up when you use
better glue and a better machine that can secure the glue in place. If
the glue can handle more heat than your speaker can handle more power!
Thick “Wadding” protects
the inside of the speaker cabinet. This can be seen if the speaker
cabinet is removed. Basically, wadding is a white chemical silk type of
material that we put inside the speaker cabinet for multiple reasons. It
helps make the sound more clear, and at the same time protects all
the parts inside the speaker. This material is also a fire retardant.
This is unique to our speakers. Most other brands do not take this step
due to the cost of the material, but it is a game changer if you are
trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit
to make the speaker look clean and modern. The volume control, bass,
and treble controls are all found on the rear of the unit.
These Monitors have all your standard studio inputs and outputs such as a ¼” input jack, RCA input, and a 3.5MM headphone output. We also added USB and SD input ports for even more input capabilities. There is a set of RCA outputs as well as an output port to the left speaker. It uses our proprietary noise rejecting cable. It features a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight.
Features:
- Rockville HTS8C cherry-wood dual 8" complete home theater system
- 1000 Watt powered bi-amped speakers (Pair)
- RMS Power: 250 Watt
- Two-Way Speaker Design
- Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers
- Built In Bluetooth with 150 foot range and perfect interference-free sound quality
- Built in USB playback
- Built in SD card playback
- Built in FM radio with crystal clear reception
- Digital display on front panel with brightness control
- Full function remote included
- Enclosure is made of top quality MDF wood. Our enclosure is not particle board, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality!
- Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
- We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The port is built to the perfect spec to enhance the sound
- Full Range Class “D” Amplifier Circuitry with Auto-Switching Power Supply
- LED Power on Indicator on Rear Panel
- Ferro Fluid Enhanced 1" Neodymium Silk Dome Tweeter With Metal Grill Protection
- Tweeter has 1” voice coil diameter
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Injection Molded Polypropylene Cone Woofer
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
- Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
- We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
- Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
- Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
- World class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brands who make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components
- 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltages more efficiently and adheres to all international efficiency standards!
- Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
- We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
- Transducer Production Line to Make the SPL Performance Stable
One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling - Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise). We also use a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight
- Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish
Inputs / Outputs / Controls: - Volume control
- Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently)
- High Speed USB jack
- 3.5mm aux input
- (2) pairs of RCA inputs
- (1) 3.5MM aux input
- (1) Optical input
- Rear panel USB and SD inputs
- ¼” Mic input for karaoke (with echo control and mic volume control)
Inputs / Outputs / Controls:
- Volume control
- Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently)
- (1) RCA input
- (1) RCA output
- (1) 3.5MM aux input
- (1) Optical input
- Front panel UB and SD inputs
- (1) ¼” Mic input for karaoke
- (1) pair of RCA outputs make the system expandable
Details:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components!
(ADI--ADAU1701, TI--TPA3116, SMPS) - System Impedance: Tweeter 6 Ohms ; Woofer 4 Ohms
- Signal to noise ratio: 91dB (Maximum output with THD+1<1%, A-weighted)
- Max SPL: 106dB @ 1w/1m
- THD: 0.10%
- Frequency Response: 30Hz - 20 kHz
- 1000 Watts peak output per pair
- 250 Watt RMS output per pair
- Each speaker produces 125 watts RMS and 500 watts Peak
- Input voltage: 120V
- Components: 1" neodymium silk dome tweeter and 8" woofer with rubber surrounds and polypropylene cone
- Product Dimensions in Inches (Single): (W*H*D): 9.9'' x 15.4'' x 12.2''
- Shipping Dimensions in Inches (For pair boxed): (W*H*D) 30.0'' x 19.53'' x 13.94''
- Net Weight(Pair): 33 LBS
- Shipping Weight (Pair): 38.4 LBS
- Includes speaker linking cable and power plug
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
Video of RHSB8:
The RHSB8 by Rockville is a universal wall mount speaker bracket. This
fits any bookshelf speaker or studio monitor or surround sound speaker
up to 12 inches wide and 13 inches deep. The bracket can adjust left to
right to accommodate large or smaller speakers.
It includes a decorative black plate cover which makes your install look
professional by hiding the wires and also hiding the installation
screws.
You can swivel the bracket 180 degrees left or right so you can point
the speaker in any direction you want. It also has a 10 degree tilt
option as well.
The non slip isolation pads eliminate unwanted vibrations and also prevent the speaker from getting scratched.
Includes:
- Pair of Speaker Mounts (for 2 speakers)
- Mounting Hardware and Installation Instructions
Features:
- Pair Rockville RHSB8 Wall Mount Swivel Home Theater Speaker Brackets
- Beautiful design with no visible screws
- Side Clamps are adjustable from 5.5” to 12”
- Swivels 180 Degrees Right to Left
- Tilts up to 10 Degrees
- Designed for Speakers 5.5” to 12” wide and up to 13” deep
- Heavy Duty Steel Construction
- Maximum Weight: 40lbs.
- Universal fit for any bookshelf speakers, studio monitors, surround sound speakers, etc.
- Optional screw holes on the side clamps for added stabilization
- Quick and easy Installation
- Heavy-gauge steel construction with cosmetic cover provides strength and durability
- Non slip isolation pads included
How to set up your APM10:
Video of APM10C:
Unboxing Video for APM10C:
The Rockville APM10 is an Active Studio Subwoofer that delivers unbelievable sounding bass! These subs put out an amazing 400 watts peak power and 200 watts RMS power. We spent a lot of time developing the most premium studio subwoofer we’ve built to date! I am very pleased and excited to talk to you guys about what we did to make this subwoofer sound as good as it does. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
Description of the enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.7” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these subwoofers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The front-firing port is built to perfect spec to enhance the sound.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use STA309 for audio processing and STA516 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. STA is the name of the makers of these IC’s. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high-end manufacturers like us use these components.
We use a 10” woofer that will outperform all 10” woofers in this price range! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The specially wound voice coils produce accurate response along for deep, rich lows. We developed the woofer with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded!
Added benefits:
The front-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on subwoofers is of the upmost importance. If the glue does not hold up, the subwoofer will be done and blow. We use the latest machinery to manufacture these subwoofers. The SPL of the subwoofer goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your subwoofer can handle more power!
Thick “Wadding” protects the inside of the subwoofer cabinet. This can be seen if the subwoofer cabinet is removed. Basically, wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the subwoofer. This material is also a fire retardant. This is unique to our subwoofers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best subwoofer!
Inputs and Outputs and Rear Panel Control:
As I mentioned earlier, we kept all the controls on the rear of the unit to make this subwoofer look clean and modern. The volume control, crossover frequency control, phase control, and treble control are all found on the rear of the unit. These subwoofers have all have standard RCA input/outputs.
Features:
- Rockville APM10C 10" 400 Watt Active Studio Subwoofer in Classic Wood Finish
- Built-in Class D Amplifier
- 200 Watt RMS
- Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF! The enclosure is 0.7” thick while the front board of it is a full 1.34” thickness to give you the ultimate best sound quality!
- Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white.
- Wood finish with vinyl front board
- We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The front-firing port is built to the perfect spec to enhance the sound
- Class “D” Amplifier Circuitry with Auto-Switching Power Supply
- LED Power on/Stand-by Indicator on Rear Panel
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network filters out Highs and Mids.
- Front-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
- We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
- Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on woofers is of the upmost importance. If the glue does not hold up, the woofer is done. We use the latest machinery to manufacture these woofers.
- The SPL of the woofer goes up when you use better glue and a better machine the secure the glue in place
- Thick “Wadding” protects inside the subwoofer cabinet – Wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons. It helps to make the sound come out more clearly, and it also protects all the parts inside the subwoofer. This material is also a fire retardant. This is unique to our subwoofers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
- World-class top of the line audiophile grade components! We use STA309 for audio processing and STA516 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ST is the name of the makers of these IC’s. Most people do not know brands who make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components
- Every subwoofer in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
- We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long, long time!)
- Transducer Production Line to Make the SPL Performance Stable
- Shiny metal mesh grill
- Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish
Inputs / Outputs / Controls:
- Volume control
- Crossover Frequency Control allows you to adjust low frequency input: 50Hz – 150Hz
- ¼” TRS input jack
- Left and Right XLR input/outputs
- RCA input/outputs
Details:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components! (ST--STA309, ST--STA516, SMPS)
- Woofer Impedance: 8 Ohm
- Signal to noise ratio: 98 dB (Maximum output with THD+1<1%, A-weighted)
- THD: 0.8%
- Frequency Response: 34Hz - 150 KHz
- 400 Watts peak output
- 200 Watt RMS output
- Input voltage: 120V
- 10" woofer with rubber surround and paper cone with painted
- Product Dimensions in Inches: (W*H*D): 13.4'' x 14.5'' x 15.7''
- Shipping Dimensions in Inches: (W*H*D)17.3 ''x 19.3'' x 19.7 '''
- Net Weight: 28.7 LBS
- Shipping Weight: 34.1 LBS
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
- UPC:
- 613815850168
