Package Includes:
- (1) MB Quart 10" Car Audio Subwoofer
- (1) Rockville Single 10” .85 cu.ft. 5/8” MDF Sealed Car Sub Enclosure Box
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized MB Quart Dealer!
Description for MB Quart Sub:
The ideal balance of a high end car audio system requires the perfect mix of speaker tone, deep bass impact and clean undistorted power. With MB Quart we make it simple to develop the impeccable Formula for a great sounding system. In the Formula subwoofers you will find that deep, powerful bass is delivered easily. These subwoofers are designed for small sealed and medium to large ported (vented) enclosures. This means that regardless of the digital music style, streaming apps, or source you choose, these subwoofers will deliver a stunning audio solution, with MB Quart Formula.
Features:
- MB Quart FW1-254 10" 600 Watt 4-Ohm Car Subwoofer
- RMS Power Handling: 300 Watts
- Peak Power Handling: 600 Watts
- Impedance: 2 x 4 Ohms
- Configuration: Round
- Voice Coils: 2
- Sensitivity: 83.9 dB
- Voice Coil: 2 inch high temperature voice coil and former for high thermal stability in small enclosure volumes where the internal box temperatures can rob you of performance
- Voice Coil Former: High temperature voice coil former allows more dissipation of heat
- Subwoofer Terminal Type: Stainless Push & Insert for a very secure electrical connection with a high end fit and finish
- Surround: UV treated, Butyl rubber surround resists sun fading and remains flexible
- Cone: Molded polypropylene cone and FEA design subcone are UVA protected and water resistant. The Polyether foam surround and FEA designed subcone resists damaging UV rays found in automotive applications
- Dust Cap: Round, reinforced dust cap adds necessary weight to the mechanical function of the woofer and keeps the cone rigid
- Basket: Stamped Steel Allows for additional strength during high volume bass passages to avoid flex in the frame
- Venting: Front and rear venting allows cooler air to be exchanged in the voice coil gap which helps the subwoofer make deep bass and extend the life of the component
- Spider: Polyester and cotton blended spider resists softening and sagging over time so you can enjoy many years of listening pleasure
- Terminals: Nickel plated push & insert to resist corrosion and aide in easy of installation
- Cut Out: 9.1" inches
- Outside Diameter: 10.09" inches
- Mounting Height with Grill and Gasket: 5.75" inches
- Enclosure Recommendation: Small Sealed or Medium/Large Vented
- Minimum Sealed Enclosure: 1 cu. ft.
- Maximum Sealed Enclosure: 3 cu. ft.
Click here for the Quick Installation Guide
Description for Rockville Enclosure:
The RSE10 is a single 10" sealed speaker box made in the USA with Grade “A” 5/8” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RSE10 Single 10” .85 cu.ft. 5/8” MDF Sealed Subwoofer Enclosure Box
- Designed for 10" subwoofers
- Machine precision cut mounting holes
- 5/8” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality speaker terminals
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
- Designed to give the best sound quality
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Single 10"
- Dimensions in Inches: 12" L x 12" W x 12" H
- Top and Bottom Depth: 12"
- Mounting Depth: up to 10.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.0 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.85 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815761495
