- (1) MB Quart FA1-2000.1 2000 Watt Mono Amplifier Car Audio 1-Ohm Class-D Amp+Remote
- (1) Rockville Rockmat RM36-B 36 Sq Ft Butyl Rubber Sound Dampening/Deadening Car Kit
Description of FA1-2000.1:
MB Quart Formula series mono subwoofer car audio amplifier featuring innovative sound quality and power technolgy. The FA1-2000.1 is a 2000 watt 1 ohm stable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit. Bass remote is included.
Features:
- Low Noise Preamplifier Circuitry:
Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion - RCA Inputs:
Nickel Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant - Hi Level Inputs:
DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off. - Operation Mode:
Mono only - Crossover Type:
Variable electronic crossovers allow for complete control of the sound - Electronic Equalizer:
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier. - Class/Topology:
Class Q1 Mono (Class D): MB Quart’s Class Q1 offers the efficiency of today’s D-Class with increased engineering to focus on sound quality from the power supply through the output devices, the FLUID-FETS. - Output Device Technology:
FLUID-FETS: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers. - Heat Sink:
Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled - Power Supply:
Rugged MOSFET Pulse Width Modulation power supply: Allows amplifier to product efficient power without taxing the vehicle electrical system - Output Connections:
Heavy duty connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier - Connection Type:
Secure connection for all power, ground and speaker connections. - LED System Protection Circuitry Diagnostics:
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel - Bass Remote Included:
Included on mono and 5 channel amplifiers. This allows the driver to make subtle changes to the bass respond of the audio system from the seated listening position.
Specification:
- Class: Class Q1 Mono (Class D)
- Total Channels: Mono
- Power @ 1 Ohm: 1 x 2000 Watts
- Power @ 2 Ohms: 1 x 1000 Watts
- Power @ 4 Ohms: 1 x 500 Watts
- Crossover: Electronic
- Variable Low pass Crossover 12db per Octave: Variable, 50Hz - 250Hz
- Bass Boost: 0-12dB
- Subsonic Filter: 10Hz - 40Hz
- Variable Voltage: .02 - 9V
- Signal to Noise: >90
- Frequency Response: 15Hz-250Hz
- Total Harmonic Distortion (THD): <0.10%
- Speaker Level Audio Inputs: RCA Jack
- power terminal 12v/gnd 4 awg
- Speaker Terminal Wire Gauge: 12 awg
- Fusing: 25A X 4
Video of RM36-B:
Unboxing Video of RM36-B:
Includes:
- 36 Square Foot Roll of Rockmat Sound Dampening Material
- Roller for a perfect installation
The Rockville Rockmat RM36 sound dampening material is a must have for any professional car audio install. This package includes 9 sheets that are each 4 square feet. This gives you a total of 36 square feet. We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.
Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.
Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as GTMAT for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality gear over here at Rockville!
Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.
We make all our models in 2 color options. You get the choice of black and silver. We decided to also keep the look very clean! We see all these other brands tattooing their logos all over the material. I always thought it looked stupid. So I made sure to keep our Rockmat with a clean look to it.
Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!
To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!
Features:
- Rockville Rockmat RM36-B 36 Sq Ft Butyl Rubber Sound Dampening/Deadening Car Kit in black
- 100% butyl rubber material with an aluminum heat resistant coating! (no asphault in our sound dampening material!!!)
- Contains a big roll of 36 feet so you can cut as needed!
- Paintable Surface
- Multi purpose is ideal for multiple applications including rear decks, doors, floors, any part of the trunk, roofs, quarter panels, hoods, etc.
- Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by
- Eliminates sound leakage!
- Improves Bass Quality and Reduces Bass Distortion
- Kill unwanted noise, rattles, vibrations
- Reduce exhaust and engine noise
- Aluminum-coated for heat-resistance
- 72mil thickness
- Full car installation reduces unwanted noises 5-8 dB
- We use the highest quality high-tack self-adhesive to make your installation quick and easy!
- Our model has new and improved increased flexibility for an easier installation and top sound quality!
- Permanent installation with ability to withstand even the highest temperatures!
- Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
- Sticks to any surface
- Designed and engineered by Rockville USA!
- Manufactured with the newest state-of-the-art machinery using only the purest raw materials as well!
- Every product is checked during production for consistency. We have very high quality standards!
- We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
- Available in both black and silver
Specifications:
- Roll Dimensions 18" x 288"
- Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
- Reduces unwanted noises 5-8 dB
- Adhesive temperature range of -100F to 300F (-60C to 150C).
- High-Tack Self-adhesive
- Material Color: Black
- Weight: 25 (Lbs.) per box
- Shipping weight: 26.19 LBS
- Shipping Dimensions: 22.64" x 14.57" x 3.54"
- Trunk Lid+4-Door Noise/Sound Dampening Deadening Car Audio Matt Kit
Features of roller:
- Made of high quality Wood & Steel
- Designed especially for use in installing sound dampening material
- Length: 7 in
- Handle Length: 5 in
- Roller Diameter: 1.3 in
- Material Color: Black
- Weight: 0.44 Lbs.
- UPC:
- 613816452248
