Package Includes:

• (1) Pair Presonus Eris 3.5 2nd Gen 3.5" Reference Studio Monitors Speakers
  
• (1) Presonus Eris Sub 8BT Compact 8" Powered Active Studio Subwoofer Sub w/Bluetooth
  
• (1) Rockville RVSM5 Pair Studio Monitor Bookshelf Speaker Stands w/Adjustable Height
  
• (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
  
• (1) Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper
  

---

Description of Eris 3.5:

Hear the music, the way it was meant to be heard.

PreSonus Eris-series studio monitors are used by professional audio engineers around the world to get the most out of their recordings. Now, you can bring that same level of performance to your home studio with the Eris 3.5.

The Eris 3.5 delivers studio-quality sound in a compact, easy-to-use package. But don't let its size fool you. The Eris 3.5 is loud, as well as clear, thanks to a 50W total Class AB power amp. Fine-tune the speakers' response to your exact needs with low- and high-frequency tuning controls or listen to your music in private with the integrated headphone amplifier.

If you're serious about music production, video editing, gaming, or just love listening to music, the PreSonus Eris 3.5 studio monitors are the perfect choice. With their incredible sound quality and versatility, they'll help you create your best work yet.

Features:

• 3.5-inch, woven-composite, low-frequency driver
  
• 1-inch, ultra-low mass, silk-dome, high-frequency driver
  
• 50W, Class AB dual amplification
  
• 80 Hz to 20 kHz frequency response
  
• 97 dB SPL (Peak, @ 1 meter)
  
• High- and low-frequency Acoustic Tuning controls
  
• Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
  
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
  
• Power Saver mode (engages after 40 minutes)
  
• Comes with speaker wire, ⅛-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

---

Description of Eris Sub 8BT:

Adding a subwoofer to full-range speakers enables you to hear the low-frequency foundation of your mix more accurately so you can make better-informed decisions and create more translatable mixes. The surprisingly loud Eris Sub 8BT drops down to 30 Hz, so you’ll hear the full sonic spectrum and produce better mixes. For EDM and hip-hop producers a subwoofer is a must-have.

Although compatible with a variety of full-range studio monitors, the PreSonus® Eris® Sub 8BT compact studio subwoofer was designed to complement the voicing and frequency response of Eris and Eris Studio-series monitors.

Features:

• 8-inch composite low-frequency driver
  
• Bluetooth® 5.0 wireless audio stereo input
  
• 50W RMS, Class AB power amplifier
  
• 30 Hz to 200 Hz frequency response
• 103 dB SPL (Peak, @ 1 meter)
  
• Input gain control (-30 dB to +6 dB, continuously variable)
  
• Continuously variable lowpass filter (50 Hz to 130 Hz)
  
• Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris® Sub 8BT outputs to the main speakers
• Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
  
• Left and right, balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers 
• Polarity invert switch
  
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
  
• Power Saver mode (engages after 40 minutes)

---

Includes of RVSM5:

• 2 stands
• 2 sets of rubber feet for hard surfaces
• 2 sets of spikes for carpet floor
• Adjustable speaker shelf
• Hex key (assembly is just 2 screws)
• Cable clips

Description:

The Rockville RVSM5 is not your ordinary speaker stand. This stand is perfect for studio monitors and bookshelf speakers. It is a best-in-class stand with all the features you want. It starts with a solid steel base that has an elegant rounded triangular shape. You can adjust the height easily with quick-access hand tightening knobs. You can also adjust the width of the speaker tray to ensure a snug fit with any speaker. The speaker tray has thick foam to eliminate unwanted vibrations.

We include feet for hard floors as well as carpet spikes. We also include snap-on cable clips that will allow you to neatly run your speaker cables. This steel stand is super strong with a weight capacity of 50 lbs. per speaker.

Features:

• Rockville RVSM5 Adjustable Height Studio Monitor Stand with Solid Base and Adjustable Speaker Platform
• Speaker stand Height adjustment: 33" to 52"
• Speaker tray is adjustable from 5.9" to 13.4" (Fits any bookshelf style speaker up to 50 Lbs.)
• Speaker tray has edges and it will adjust to the width of your speaker
• Speaker tray has thick foam padding to reduce speaker vibrations
• Hand tightening knobs to adjust tray width or height
• Includes rubber feet for hard floors and spikes for carpet
• Snap-on Cable clips included to hide cables
• Elegant and stable design with rounded triangular base plate
• Solid Steal
• Perfect for studio monitor speakers and home speakers
• Load Capacity: 50 lbs. per stand

---

Video of RRS190S:

Authorized Rockville Dealer!

Description:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers' sound to become inaccurate, unfocused and lose their "musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems "shock absorbers". Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don't get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the "coupled" vibrations, will be heard giving you false sound reproduction. But because these "coupled" vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By "decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam
• 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
• Price is for (2) pads which accommodates (2) speakers

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

Video of RCDR10B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable
• Dual RCA to Dual RCA
• Nickel-Plated for Rugged Durability and Efficient Signal Transfer
• 100% Copper Conductors for Enhanced Signal Clarity
• OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
• Length: 10 Ft
• Color: Black