Package Includes:
- (1) Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofers Plexi Sub Enclosure Box
- (1) MTX THUNDER1000.1 1000 Watt RMS Mono Class D 1-Ohm Amplifier Car Audio Amp
- (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
How to set up your DV12K6 Enclosures:
Description:
Finally! Rockville enclosures!
We didn’t want to just put out any enclosure and slap our name on it. Our subs deserve a better home than an ordinary pre-fab enclosure! We tasked our team to make the nicest enclosure in the history of car audio and this is what they came up with!
The enclosure is strong and sturdy and has amazing sound! That is what is most important of course. But wait, there is more! This is a show ready enclosure! The front panel has thick plexi glass and we put LED’s in strategic locations that give this a really unique design that you will not find anywhere else. The LED’s have a selectable switch allowing you to select white or blue.
Did we succeed in making the nicest enclosure ever ? I searched all the popular brands and I did not find any enclosure that looked better.
Housed inside this enclosure are our famous K6 subs.
Enclosure Features:
- Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofer w Plexi Sub Enclosure Box
- Final Impedance: 1 Ohm
- Peak Power Handling: 4800 Watts
- Continuous RMS Power Handling: 1200 Watts
- ¾” MDF enclosure with black carpet
- 1” MDF where the subs are mounted
- Made with Sexy-Plexy! Plexi-glass front panel
- LED with selectable colors (white or blue selectable) (The LEDs were designed to have a professional look for a show car)
- Show ready enclosure! We were given the challenge by our team to develop the nicest enclosure in the history of car audio and this is what we came up with. We hope you all love it!
- Bonded stapled and braced and it is strong as a beast
- Vented enclosure (side firing)
- Pre-wired down to a 1 ohm final impedance
- Copper push terminals
- Vent dimensions: 1.77" x 11.57" x 15.75"
- Tuning frequency of enclosure: 35 .6Hz
- Dimensions: 15.2” H x 32.01” W x 12.6 or 15.75” D (the rear of the enclosure is sloped so the depth is different on the top and bottom)
Sub features:
- 2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
- Double Stacked 100 Oz High Quality Magnet
- Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Polypropylene (PP) Dustcap
- Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
- Impedance: Dual 4-Ohm Voice Coils
- Vented Hole on T-yoke Enhances Heat Dissipation
- High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
- Cutout Diameter: 11.125” inches
- Mounting Depth: 5.75” inches
- Frequency Response: 27 Hz - 1.5K kHz
- 8mm T-Yoke + 8mm Washer
- Sensitivity: 85dB
- XMAX:22 MM (One way)
How To Set the Gain On your Car Subwoofer Amplifier:
Authorized MTX Dealer! Feel the Thunder This wailin' amp features a high efficiency class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long. High Power High Value Secure Connections Please note: If you
purchase MTX from an un-authorized seller then you are taking a big
risk. You will not have any manufacturers warranty, and there is no
guarantee that the item is authentic, brand new, or even working. All About Your RWK CU Series: Description: We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands. Maximum Power! Looking for a wire kit that has 100% true specifications! A wire kit that uses 100% copper 4-gauge cable! Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.
The power and ground cables aptly named "Mega Power Cable" is a no compromise power cable. Rockville's engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces "surface skin impedance loss" so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a "heavy-duty" cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won't discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 120-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 14-gauge speaker cable included in the 4-gauge kit can handle over 2000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features: Kit includes:
MTX THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 2000 watts peak power (1000 watts RMS) in an incredibly small package.
The THUNDER1000.1 is a high powered subwoofer amplifier capable of delivering up to 1000 watts RMS power at 1Ω. Additionally, the unit is designed to be installed in almost any vehicle due to its small chassis size.
Technologically Advanced
The THUNDER1000.1 features surface mount technology. This design uses smaller more efficient parts that adhere to the circuit board much better than traditional through hole designs making it extremely vibration resistant.
Easy Adjustment
The control panel on the THUNDER1000.1 is easy to access and make adjustments. The unit includes a variable low pass filter and a selectable bass boost, 0, +6, or +12dB. The unit also features a subsonic filter that can be used in conjunction with a vented enclosure for optimal sound quality.
The THUNDER1000.1 uses set screw type connections for both its power and speaker terminals. The power and ground inputs will support up to a 1/0 AWG wire and the speaker inputs can support up to a 12 AWG wire. Set screw type connectors provide the most secure connection minimizing power loss and delivering all the power to the amplifier and to the speakers.
Features of THUNDER1000.1:
Advantages of buying from an authorized seller:
- UPC:
- 613817134037
