Package Includes:

• (1) Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofers Plexi Sub Enclosure Box
• (1) Rockville KRYPTON M4 6000w Peak/1500w RMS Mono 1 Ohm Car Amplifier Amp+Remote
• (1) Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's

---

Video of DV12K6 SERIES :

How to set up your DV12K6 Enclosures:

Description:

Introducing the Rockville DV12K6D1 Enclosure with K6 Subwoofers

We set out to create something truly exceptional - an enclosure that not only performs but elevates your car audio experience. Ordinary pre-fab enclosures weren't enough for our renowned K6 subs. Our team rose to the challenge and crafted what we believe is the most impressive enclosure in car audio.

This enclosure is built to last with robust materials and delivers outstanding sound quality, which is, of course, the priority. But it’s not just about sound - it’s a showstopper! The front panel features thick plexiglass with strategically placed LED lights that provide a unique aesthetic. Choose between white or blue illumination to match your style or vehicle’s interior.

After researching all the top brands, we can confidently say this enclosure stands above the rest.

This enclosure isn’t just a home for your subs - it’s a statement. With unmatched design, durability, and performance, it’s the ultimate upgrade for car audio enthusiasts.

Enclosure Features:

• Dual 12" Subwoofers: Loaded with 2RockvilleW12K6D4 V2subswith a total power handling of 4800 watts peak, 1200 watts RMS. Pre-wired to1-ohmfinal impedance
  
• Strong Build: Crafted with ¾” MDF, black carpet, and 1” MDF for sub mounting.
  
• Show-Ready Design: Plexiglass front panel with selectable white or blue LED lighting for a professional show car look.
  
• Optimized Sound: Vented enclosure with precise tuning at35.6 Hz.
• Reliable and Durable: Bonded, stapled, and braced construction with10 gauge copper push terminals.
• Dimensions (Inches): 15.2” H x 32.01” W x 12.6” (top depth) / 15.75” (bottom depth).

Subwoofer Features:

• 2.5" voice coils with black aluminum formers and 100% USA-made OFC copper wire for long-lasting performance.
  
• Double-stacked 100 oz magnets and a cast aluminum basket with a black sanded finish for efficiency.
  
• Fiber-reinforced ultra-stiff black non-pressed paper cone and thick foam surround for minimal distortion.
  
• Advanced cooling system with a vented T-yoke and high BL magnetic motor gap.
  
• Frequency response: 27 Hz-1.5 kHz; Sensitivity: 85 dB; XMAX: 22 mm (one-way).

---

Krypton Series (Product Video):

What's in the Box:

• Amplifier
  
• 150A External fuse
  
• Bass Remote with clipping indicator
  
• Birth sheet with tested power
  
• Owner’s manual
  
• Mounting Screws
  
• Warranty
  

Description:

The Krypton series of amplifiers by Rockville are engineered to have the best reliability and features. Whether you are a car audio competitor or just like to enjoy loud music. We engineered and designed these amps from the ground up to give you great sound quality and great features. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

Our favorite feature we introduced of the Krypton series is the  bass remote that has a clipping indicator . This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).

We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.

Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ are created equal. Some bass EQ's will just clip your subs to death.  Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give you as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will be giving over the rated Dyno Certified so you can confidently match our amplifier with high-end subs and know what to expect! 

What about sound quality and efficiency though ??
 Well glad you asked. This amplifier is engineered so well that it has an extremely low signal to noise ratio which just means the sound will be super clean even at high volume levels. It also has a good efficiency rating so you don't have to draw too much power from your battery. One other thing that is important is that we engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noises the end result is the cleanest sound quality.

Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. In our opinion this is the best budget series of amps in the world. We actually enjoy this amp more then others that cost over 2 times the price. 

Features:

• Rockville Krypton-M4 6000 Watt Peak / 1500w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp
  
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
  • 1 Ohm: 1500 Watts x 1 Channel <1% THD+N  (76% efficient)
    
  • 2 Ohm: 1000 Watts x 1 Channel <1% THD+N  (86% efficient)
    
  • 4 Ohm: 550 Watts x 1 Channel <1% THD+N  (89% efficient)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  
  • 1 Ohm: 6000 Watts x 1 Channel
    
  • 2 Ohm: 4000 Watts x 1 Channel
    
  • 4 Ohm: 2200 Watts x 1 Channel
    
• Digital Voltage Display on Amp (Accurate within 0.15V)
  
• Power/Protect/Clip LED Indicators on the front panel
  
• Power/Protect/Clip LED Indicators on Remote control
  
• Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
  
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  
• Low Pass Filter: 50Hz - 250Hz
  
• Subsonic Filter: 15Hz - 55Hz
  
• Fully Adjustable 12dB Bass Equalizer
  
• Remote Dashboard Subwoofer Control
  
• 8 Volt Preamp Circuitry
  
• Phase Control Switch
  
• High-Speed MOSFET Power Supply
  
• Optical Coupler Class “D” Technology
  
• Full IC-Controlled Protection Circuitry
  
• Mute and Delay Soft Start System
  
• RCA Preamp Line Output
  
• Status Mode LED Indicator
  
• Minimum THD at Rated Power: <0.1%
  
• S / N Ratio: >90dB
  
• Frequency Response: 15Hz - 250Hz
  
• Damping Factor: >150 @ 100Hz
  
• 150A External Fuse Included
  
• Passes the Signal Burst Test (Instant signal for full power “SPL Contest”)
  
• Rockville engineered with a super low signal to noise ratio to give you clean sound
  
• Improved Bass EQ filter works well to boost the proper frequencies
  
• Dimensions: (W x H x L) 16.29? x 8.66? x 2.2?

---

Video of RWK01:

Description:

The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is lost per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires have a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

Features:

• Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
• 17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
• 3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
• Gold Plated ANL Heat Resistance Fuse Holder
• 200 Amp ANL Gold Plated Fuse
• 1 – 17’ High Grade Twisted Pair of RCA Interconnects
• 25’ Translucent Blue Speaker Wire
• 7’ Split Loom Tubing
• 17’ Amplifier Remote Turn On Cable
• Wire Ties and Ring Terminals, and all other accessories you need for a clean installation
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F