- (1) Beyerdynamic DT 290 MKII 80 Ohm Double-Ear Broadcasting Headset w/Microphone
- (1) Rockville RockShield 1 Studio Microphone Isolation Shield w/Sound Dampening Foam
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
Description of DT 290 80 Ohm:
The lightweight, closed headsets DT 290 suit ideally for broadcasting applications The headphone is featuring an efficient neodymium magnet system, a very high reproduction precision and a balanced sound Another special feature is the wide transmission range of 10 - 30,000 Hz The headsets come with 80 O systems The soft circumaural earcups and the fully adjustable padded headband are extremely comfortable
The dynamic microphone can be optimally positioned with the flexible gooseneck The hypercardioid polar pattern guarantees an extremely high-gain-before feedback and noise cancellation The microphone holder is rotatable so that the microphone can be worn on the left or right side The cables to the ear cups and the microphone run safely in the headband The connecting cable is single-sided, plug-in type with a golden combi 1/4"/mini jack plug All parts such as ear pads, headband and gooseneck microphone are easy to replace
Features:
- Beyerdynamic DT 290 MKII 80 Ohm Double-Ear Broadcasting Headset w/Microphone
- High-quality dynamic microphone with hypercardioid characteristic (high feedback prevention)
- Flexible, swivelling gooseneck for optimum positioning
- High-performance neodymium magnet system for excellent playback precision
- Soft, circumaural ear pads, practical click system for replacing the ear pads
- Made in Germany
- All versions of the DT 290 are supplied without a connection cable Please order the desired connection cable at the same time
- Closed headphone
- Good ambient noise attenuation
- Neodymium magnet system for perfect reproduction
- Soft, circumaural ear pads
- Single-sided, plug-in type connecting cable (delivery does not include the connecting cable)
- Limiter (optional)
- Flexible, pivotable gooseneck for optimal positioning with elasticated microphone suspension
Specifications:
Headphone
- Transducer principle: Dynamic
- Operating principle: Closed
- Transmission range: 10 - 30,000 Hz
- Nominal impedance: 80 O / system
- Nominal SPL at 1 kHz: 100 dB SPL at 1 mW = 028 V to 80 O
- THD: < 02%
- Nominal power rating: 100 mW = 120 dB = 28 V to 80 O
- Ambient noise insulation approx: 16 dBA
- Average pressure on ears: 45 N
- Weight without cable: 240 g
Microphone DT 290
- Transducer principle: Dynamic
- Frequency response: 40 - 12,000 Hz
- Polar pattern: Hypercardioid
- Output voltage at a distance of 5 cm: approx 13 mV/Pa
- Nominal impedance: 200 O
- Nominal output impedance: > 1000 O
- Outer diameter: approx 232 mm
Microphone DT 290 V11
- Transducer principle: Dynamic
- Frequency response: 40 - 12,000 Hz
- Polar pattern: Hypercardioid
- Output voltage at a distance of 5 cm: approx 15 V/Pa
- Nominal impedance: 200 O
- Current consumption: 8 - 56 mA
- Outer diameter: approx 232 mm
What's In The Box:
- 3 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter and 3/8” Mic Adapter
- All metal Tripod Desktop mic attachment
How to Set Up Your RockShield 1:
Video of RockShield 1:
Description:
Rockville’s RockShield 1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RockShield1 keeps unwanted outside audio waves and vibrations from affecting your recording. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, while room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a counter top or tabletop. Easy installation and studio quality performance will quickly make the RockShield 1 your go-to sound dampening isolation shield.
Features:
- Rockville RockShield 1 Studio Microphone IsolationShield with Sound Dampening Foam
- Number of Panels: 3 Pieces
- Dimensions Each Panel: 8.2'' x 4.5'' inches
- Dimensions Assembled Unit: 11'' x 4.3” x 16.3” inches
- Keeps Excessive Room ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- 1.5" Thick High Density Pyramid Acoustic Foam
- Front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand Mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8” Die-Cast Metal Threads
- Mic Stand with 5/8” Adapter
- The shield frames are made of high strength die cast aluminum
- Net plates are made of high grade steel
- Net Weight (Without Tripod Stand): 1.1 lbs
- Net Weight (With Tripod Stand): 2.0 lbs
All about Your RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 320 Grams (0.7 Pounds)
- Microphone Max.diameter: 44mm (1.73" inches)
- Microphone Length: 217mm (8.54" inches)
- Microphone Material: Steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.- UPC:
- 613815706519