- (1) Beyerdynamic DT 108 400 Ohm Black Singe-Ear Broadcasting Headset w/Microphone
- (1) Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp
Description of DT 108 Black 400 ohm:
The DT 108 single-muff headset is designed for live, remote broadcasting, for studio, film and TV-applications. One side is open to monitor ambient sound. The protective ear cup attenuates up to 20 dB of ambient noise. The headset features a noise cancelling microphone. Available in different impedances
Features:
- Beyerdynamic DT 108 400 Ohm Black Singe-Ear Broadcasting Headset w/Microphone Mic
- Excellent isolation from ambient noise (suitable for high sound pressure levels)
- High-quality hearing and microphone systems
- Single-sided, detachable connection cable
- Soft circumaural ear pads
- Made in Germany
- All versions of the DT 108 are supplied without a connection cable. Please order the desired connection cable at the same time.
Specifications:
Headphone
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 30 - 20,000 Hz
- Nominal impedance: 400 O ± 10% per cartridge*
- Nominal SPL at 1 kHz: 94 dB
- T.H.D: < 1%
- Power handling capacity: 1000 mW 124 dB
- Ambient noise attenuation approx: 20 dBA
- Sound coupling to the ear: Circumaural
- Headband pressure approx: 4.5 N
- Weight (without cable): 283 g
Microphone
- Transducer type: Dynamic
- Operating principle: Pressure gradient
- Frequency response: 40 - 12,000 Hz
- Polar pattern: Hypercardioid
- Output voltage approx: 2.5 mV at a distance of 5 cm
- Nominal impedance: 200 O
- Load impedance: = 1000 O
All About Your RCM01:
Description:
Precision Meets Affordability
The Rockville RCM01 condenser microphone strikes the perfect balance between performance and value. Whether you're a seasoned musician, content creator, or podcast host, here's why the RCM01 deserves a spot in your recording setup:
Crystal-Clear Sound Capture
The RCM01 features a large 25mm diaphragm that faithfully reproduces your voice, instruments, or ambient sounds. Say goodbye to muffled recordings—this microphone delivers clarity across the frequency spectrum.
Unidirectional Cardioid Pattern
With its unidirectional cardioid polar pattern, the RCM01 focuses on what matters most: your performance. It rejects unwanted noise from the sides and rear, ensuring professional-grade recordings every time.
Low Self-Noise, High Sensitivity
The RCM01's low equivalent noise level (only 18dBA) means cleaner recordings, even in quiet environments. Its sensitivity of -27dB±2dB captures every whisper and powerful note with precision.
Built to Last
The rugged all-metal chassis ensures durability, whether you're in the studio or on the road.
Easy Integration
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Connect the RCM01 to your audio interface or mixer using 48V DC phantom power or or you can connect it directly to your computer sound card with the 3.5MM cable. We include both cables!. It's compatible with most setups, making it a versatile choice for home studios, podcasts, live streaming, and more.
Metal Shock Mount Included
Say goodbye to vibrations and handling noise. The included shock mount keeps the RCM01 stable, allowing you to focus on your artistry without distractions.
The RCM01's sleek design features a steel basket and zinc alloy body. It's lightweight yet sturdy, making it an ideal choice for both beginners and professionals.
What's Included:
- RCM01 Condenser Microphone
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM01 Pro Studio Recording Compact Large Diaphragm Condenser Microphone
- Standard shock mount included
- All metal chassis design for ruggedness and stability
- Polar Pattern: Unidirectional Cardioid
- Large 25mm diaphragm for smooth, natural sound
- Permanently Polarized Single Sided "Electret" Style Capsule
- Cardioid Polar Pattern Reduces Pickup of Sound From Sides and Rear, reducing unwanted noise
- Power Requirements: 48V DC Phantom Power
- Sensitivity: -27dB±2dB (0dB=1V/Pa @ 1kHZ)
- Output Impedance: 200 Ohms ±30% (@ 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V - 10V
- Current Consumption: <= 500uA
- Voltage Deduction Characteristic: Within 3dB at 2V
- S/N Ratio: 70 dB
- Frequency Response: 30Hz - 20 kHz
- Fixed Crossover Filter Cutoff Frequency: 40 Hz - 16 KHz
- Load Impedance: >= 1000 Ohms
- Equivalent Noise Level: <= 18dBA (IEC 581-5)
- Max. Input SPL: 130dB (THD=1.0% @ 1kHZ)
- Electrical Current: >= 4.8mA
- Microphone Body Net Weight: 325 Grams (0.72 Pounds)
- Microphone Max.diameter: 48mm (1.89" inches)
- Microphone Length: 157mm (6.18" inches)
- Microphone Material: Steel Basket + Zinc Alloy Body
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.How to Set Up DMS40:
Video of DMS40:
The Rockville DMS40 desktop microphone boom arm is the perfect accessory for any podcast, home studio setup, or broadcasting studio. Its rotating design provides a maximum arm reach of 40" giving you freedom to place your mic anywhere you want!
Our designers used the most sturdy and long lasting clamps and springs, with durable steel construction.
Features:
- Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm
- Articulating microphone boom arm
- Suitable for studios, broadcasting, podcasting, and more
- Arms: 20"+20" arm length for adjustment
- C-shape desk clamp is made of aluminum alloy
- Fits any desk less than 2 inch thick
- ABS plastic mic clip
- You can set the base of the stand on the desk firmly and adjust to your favorite position
- High quality steel frame is sturdy and durable
- Internal springs for silent and effortless positioning
- UPC:
- 613815703761
