- (1) Hercules DJControl JogVision 2-Deck USB Serato DJ Controller w/In-Jog Display
- (1) Rockville APM6B 6.5" 2-Way 350W Active/Powered USB Studio Monitor Speakers Pair
- (1) M-Audio Oxygen 25 MK IV 25-Key USB MIDI Keyboard Controller MKIV MK4
- (1) Rockville RCM PRO Studio/Recording Condenser Microphone w Samsung Capacitors
- (1) Rockville RDMS70 Desktop Mic Stand with Boom+Steel Round Base+Adjustable Height
- (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
- (1) Rockville RLS2400 Lightweight Folding DJ Laptop Stand w/Extra Shelf & Travel Bag
- (1) Samson SR850 Professional Semi-open Studio Reference Monitoring Headphones
- (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
Authorized Hercules Dealer!
Description of DJControl JogVision:
DJControl Jogvision is the first mobile Hercules DJ controller to feature a display in the center of each jog wheel, simultaneously indicating both the playback speed and position in the track at a glance. These displays allow DJs to spend less time looking at a computer screen, for enhanced focus, faster responsiveness and better track syncing - paying more attention to the music and their audience instead.
Cue Color Match:
Tailored for the control of cue points and sampler, the drum pads backlights
match the default color of each cue point in Serato DJ and DJ Intro, so that cue
points control is natural and intuitive. Air Roll, a hand gesture with the air
control, gives access to a new sound, Filter Roll: rolling the hand over the air
sensor produces a spectacular roller-coaster effect with a low-pass filter
increasing, then decreasing, afterwards re-increasing in a rapid cycle.
The in-jog displays are
unique in this mobile DJ controller category.
The jog wheels show 3 key pieces of information which visually guide your
gesture for scratching and mixing! During playback : 2 rings = 2 pieces of
information. The blue ring’s rotation speed shows the playback speed of the
track. The white ring’s display shows the position within the track currently
playing. When scratching: the display shows the angular position.
Boost your performance
Thanks to the displays, focus on your performance instead of focusing on your
computer screen. Locate the target position at your fingertips, much faster than
having to look up at the computer screen. Scratch with more precision and more
easily!
You’re a scratcher? Get
the feel of CD deck platters
• Both blue displays rotate at 33? RPM
• If you can scratch with two DJ CD players, you can scratch with DJControl
Jogvision
• Whatever your scratching skills, the displays guides your hand’s move
2 Sets of 4 Drum Pads -
with RGB Backlighting and Cue Color Match
When pressed, the drum pads do not depress, so trigger commands (samples or cue
points) faster than other kind of pads. Different colored backlighting depending
on Sample mode or Cue point mode. RGB Cue Color Match: In Cue point mode, the
color of each pad matches the default color of the Cue point it controls in
Serato DJ. A perfect match between hardware and software for an intuitive
control
Air Control:
Unleash your creativity and improve your stage appearance thanks to the
contactless sensor! The Air Control converts the distance between your hand and
the sensor in modulation of the low-pass filter. Control the low-pass filter
without any contact, your hand moves create new sounds: ‘Filter Push’, ‘Filter
Cut’, ‘Filter Roll’ (spectacular roller-coaster effect!).
Features:
- Hercules DJControl JogVision 2-Deck USB Serato DJ Controller w/In-Jog Display
- Built-in high resolution 24-bit /96 kHz audio interface
- Outputs: Mix and Headphones, Booth Out (With adjustable volume for speakers)
- Microphone input to talk over + Auxiliary input to connect an external audio source. Both are recordable.
- Powerful enough Master and Booth outputs to connect PA systems
- DAC Wolfson, 106dB SNR (A-weighted)
- Includes Serato DJ Intro
- 2 decks + 1 central mixer, in an ergonomic and mobile shape
- Robust construction for durability and transportability
- 15 cm/5’’90 : similar diameter to the platters on DJ CD players, the largest platters in its category
- Instant touch detection to scratch with high precision and with no latency
- RGB Cue color Match
- The Air control range of 12’’/30 cm lets the bit magical DJ’s hand movements be seen by the audience!
- Mechanical Specifications:
- Enclosure 17.9 x 10"/45.5 x 25.4 cm
- Jog wheels 5.9"/15 cm diameter
- Weight 5.5 lbs/2.5 kg
- ASIO + WDM in Windows®
- • Core Audio in Mac OS®
- Controls
- MIDI (extended MIDI on faders + potentiometers)
- HID
- Outputs
- Master 1-2: 2 RCA + 1/8" stereo
- Booth 1-2: 2 RCA
- Headphones: 1/4" + 1/8" (stereo)
- Inputs
- Mic 1/4" microphone in
- Aux 1/8" stereo line in
- Resolution
- 16/24-bit audio at 44.1/48/96 kHz
- Minimum Configuration
- 2 GHz Core 2 Duo/Athlon 64 X2 or faster CPU
- 2 GB RAM or more, USB high speed port
- Internet access
- Operating system (32-bit/64-bit)
- Mac OS® 10.7/10.8/10.9/10.10/10.11
- Microsoft Windows® 7/8/10
All About Your APM6 Studio Monitors:
How To Set Up Your APM6 Studio Monitors:
Inputs, Outputs, and Controls on Your APM6 Explained:
How To Connect an Interface to your APM6:
How To Connect Your Computer to your APM6:
How To Set Up a Subwoofer with Your APM6:
How to Set Up Your APM Series Speakers:
Video of APM6B:
Unboxing video of APM6B:
The Rockville APM6 Active Studio Monitor Comes in Pairs and each monitor will be bi-amped. What this means is that there is a separate amp for the highs and a Separate amp for the lows! Each speaker has 175 watts peak output power and 67.5 watts RMS giving you a total of 350 watts peak and 175 watts RMS per pair. We spent a lot of time developing the most premium studio monitors we ever built! I am very pleased and excited to talk to you guys about what we did to make these speakers sound as good as they do. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
Description of the enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particleboard material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but also elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The rear port is built to perfect spec to enhance the sound. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high-end manufacturers like us use these components.
For highs, we have Ferro fluid enhanced 1.5" neodymium silk dome tweeters with metal grill protection. If you are an audiophile I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without worrying about melting and blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.
We use a 6.5” woofer. This will out-perform a regular 6” or 5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids. Basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies so that the speaker can go loud without distorting. We use very high-grade crossover filters in our speakers. The specially wounded voice coils produce accurate response along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded!
Added benefits:
The rear-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your speaker can handle more power!
Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The volume control, bass, and treble controls are all found on the rear of the unit.
These Monitors have all your standard studio inputs and outputs such as a ¼” and XLR combo input jack, RCA input, 3.5MM headphone output. We also added a USB port. The reason we did this is because instead of having to use the 3.5MM or 1/4" TRS jack, you can now directly select the speakers as an output on your computer without using an interface! And you will get true stereo sound!
Features:
- Rockville APM6B 6.5" 2-Way 350 Watt Active/Powered USB Studio Monitor Speakers in Black (Pair)
- RMS: 175 Watt
- Two-Way Active Studio Monitor Speaker System
- Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers
- Enclosure is made of top quality MDF wood. Our enclosure is not particleboard, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality!
- Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
- We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The port is built to the perfect spec to enhance the sound
- Full Range Class “D” Amplifier Circuitry with Auto-Switching Power Supply
- LED Power on Indicator on Rear Panel
- Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
- Tweeter has 1” voice coil diameter
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Injection Molded Polypropylene Cone Woofer
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
- Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
- We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
- Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
- Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clearly, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
- World-class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brands that make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components
- 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltages more efficiently and adheres to all international efficiency standards!
- Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
- We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
- Transducer Production Line to Make the SPL Performance Stable
- One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling
- Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise). We also use a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight
- Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish
Inputs / Outputs / Controls:
- Volume control
- Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently)
- ¼” and XLR combo input jack
- High Speed USB jack
- RCA input
- 3.5mm Headphone output
Details:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components!
(ADI--ADAU1701, TI--TPA3116, SMPS) - System Impedance: Tweeter 6 O
- Woofer 4 O
- Signal to noise ratio: 90dB (Maximum output with THD+1<1%, A-weight)
- Max SPL: 102dB @ 1w/1m
- THD: 0.10%
- Frequency Response: 50Hz - 20 kHz
- 350 Watts peak output per pair
- 175 Watt RMS output per pair
- Each speaker produces 175 watts peak and 87.5 watts RMS
- Input voltage: 120V
- Components: 1" neodymium silk dome tweeter and 6.5" woofer with rubber surrounds and polypropylene cone
- Product Dimensions in Inches (Single): (W*H*D): 8.5” inch x 12.6” inch x 10” inch
- Shipping Dimensions in Inches (For pair boxed): (W*H*D): 25.35” x 16.38” x 12.2” inch
- Net Weight (Pair): 22 LBS
- Shipping Weight (Pair): 26 LBS
- Includes speaker linking cable and power plug
- Input Impedance (Ohms): 10K Ohm Balanced
- System Volume: (-30dB to +6dB)
Description of OXYGEN25IV:
Melodics Offer
For a Limited time join over 100,000 musicians building their skills with
Melodics. Melodics is a desktop app that teaches you to play and perform with
MIDI keyboards, pad controllers, and drums. Whether your just starting out or a
seasoned pro looking to learn advanced techniques Melodics grows with you. It’s
free to download upon registration of your controller, and comes with over 60
free lessons (Including Five Exclusive to M-Audio) to get you started!
NEW: Welcome to The World of VIP Music Software | Effortless Integration,
Enhanced Workflow
Experience expanded control of your VST instrument and effect collection with
Oxygen 25 and VIP3.0 (Free Download Included a $99.99 Value). VIP3.0 provides
you with unparalleled access to your virtual instrument and effect collection,
seamlessly integrating the hardware / software experience and grants the
unrestricted freedom to create in a user-friendly, intuitive format. The
combination of VIP and Oxygen 25 maximizes workflow and ensures a playing
experience that feels natural and enhances creativity – the natural, tactile
feel of hardware fused with the unrivalled processing capability of virtual
Instruments. Quickly find sounds based on instrument type, timbre, style or
articulation from your entire VST library; sculpt immersive, expressive sounds
and textures layering up to 8 separate instruments and patches per VIP instance;
load up to 4 different VST effects per instrument channel to sculpt the perfect
sound; put power into your performance with Pad Chord Progressions and
user-friendly Key Control processors; and much more. From live performance to
studio production, VIP’s user-friendly functionality coupled with a diverse
feature set guarantees simple, seamless integration into your existing setup and
provides the ultimate platform for unrestricted creative expression.
The Oxygen Series
M-Audio pioneered the portable MIDI controller market with the Oxygen series of
keyboard controllers. Today, M-Audio continues to be a leader of this technology
by developing intuitive controllers for software-based music production and
performance. Thanks to continued innovation over the course of nearly a decade,
the new Oxygen series controllers offer more control, deep hardware/software
integration, and come equipped with a reliable build that enables you to make
music on the go or implement these controllers into any studio.
Streamlined Control
With an array of assignable knobs, pads, and a fader, Oxygen 25 gives you total
control over your software, allowing you to stay engaged in the creative f
- UPC:
- 613815660262
