Package Includes:

• (1) Hercules DJControl JogVision 2-Deck USB Serato DJ Controller w/In-Jog Display
• (1) Novation LAUNCHKEY-25-MK2 25-Key USB MIDI Ableton Live Lite Keyboard Controller
• (1) Rockville RLS2400 Lightweight Folding DJ Laptop Stand w/Extra Shelf & Travel Bag
• (1) Rockville APM5B 5.25" 2-Way 250W Active/Powered USB Studio Monitor Speakers Pair
• (1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (1) Rockville RDMS70 Desktop Mic Stand with Boom+Steel Round Base+Adjustable Height
• (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
• (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles

---

Authorized Hercules Dealer!

Description of DJControl JogVision:

DJControl Jogvision is the first mobile Hercules DJ controller to feature a display in the center of each jog wheel, simultaneously indicating both the playback speed and position in the track at a glance. These displays allow DJs to spend less time looking at a computer screen, for enhanced focus, faster responsiveness and better track syncing - paying more attention to the music and their audience instead.

Cue Color Match:
Tailored for the control of cue points and sampler, the drum pads backlights match the default color of each cue point in Serato DJ and DJ Intro, so that cue points control is natural and intuitive. Air Roll, a hand gesture with the air control, gives access to a new sound, Filter Roll: rolling the hand over the air sensor produces a spectacular roller-coaster effect with a low-pass filter increasing, then decreasing, afterwards re-increasing in a rapid cycle.

The in-jog displays are unique in this mobile DJ controller category.
The jog wheels show 3 key pieces of information which visually guide your gesture for scratching and mixing! During playback : 2 rings = 2 pieces of information. The blue ring’s rotation speed shows the playback speed of the track. The white ring’s display shows the position within the track currently playing. When scratching: the display shows the angular position.

Boost your performance
Thanks to the displays, focus on your performance instead of focusing on your computer screen. Locate the target position at your fingertips, much faster than having to look up at the computer screen. Scratch with more precision and more easily!

You’re a scratcher? Get the feel of CD deck platters
• Both blue displays rotate at 33⅓ RPM
• If you can scratch with two DJ CD players, you can scratch with DJControl Jogvision
• Whatever your scratching skills, the displays guides your hand’s move

2 Sets of 4 Drum Pads - with RGB Backlighting and Cue Color Match
When pressed, the drum pads do not depress, so trigger commands (samples or cue points) faster than other kind of pads. Different colored backlighting depending on Sample mode or Cue point mode. RGB Cue Color Match: In Cue point mode, the color of each pad matches the default color of the Cue point it controls in Serato DJ. A perfect match between hardware and software for an intuitive control

Air Control:
Unleash your creativity and improve your stage appearance thanks to the contactless sensor! The Air Control converts the distance between your hand and the sensor in modulation of the low-pass filter. Control the low-pass filter without any contact, your hand moves create new sounds: ‘Filter Push’, ‘Filter Cut’, ‘Filter Roll’ (spectacular roller-coaster effect!).

Features:

• Hercules DJControl JogVision 2-Deck USB Serato DJ Controller w/In-Jog Display
• Built-in high resolution 24-bit /96 kHz audio interface
• Outputs: Mix and Headphones, Booth Out (With adjustable volume for speakers)
• Microphone input to talk over + Auxiliary input to connect an external audio source. Both are recordable.
• Powerful enough Master and Booth outputs to connect PA systems
• DAC Wolfson, 106dB SNR (A-weighted)
• Includes Serato DJ Intro
• 2 decks + 1 central mixer, in an ergonomic and mobile shape
• Robust construction for durability and transportability
• 15 cm/5’’90 : similar diameter to the platters on DJ CD players, the largest platters in its category
• Instant touch detection to scratch with high precision and with no latency
• RGB Cue color Match
• The Air control range of 12’’/30 cm lets the bit magical DJ’s hand movements be seen by the audience!
• Mechanical Specifications:
  • Enclosure 17.9 x 10"/45.5 x 25.4 cm
  • Jog wheels 5.9"/15 cm diameter
  • Weight 5.5 lbs/2.5 kg
• ASIO + WDM in Windows®
  • • Core Audio in Mac OS®
• Controls
  • MIDI (extended MIDI on faders + potentiometers)
  • HID
• Outputs
  • Master 1-2: 2 RCA + 1/8" stereo
  • Booth 1-2: 2 RCA
  • Headphones: 1/4" + 1/8" (stereo)
• Inputs
  • Mic 1/4" microphone in
  • Aux 1/8" stereo line in
• Resolution
  • 16/24-bit audio at 44.1/48/96 kHz
• Minimum Configuration
  • 2 GHz Core 2 Duo/Athlon 64 X2 or faster CPU
  • 2 GB RAM or more, USB high speed port
  • Internet access
  • Operating system (32-bit/64-bit)
  • Mac OS® 10.7/10.8/10.9/10.10/10.11
  • Microsoft Windows® 7/8/10

---

Includes:

• Launchkey 25
  
• Green USB cable
  
• Getting Started guide
  
• Live Lite registration card

Video of LAUNCHKEY-25-MK2:

Description:

Novation Launchkey (MK2) is the quickest and easiest way to produce and perform electronic music using Ableton Live. Just plug in via USB and the keys, knobs, and velocity-sensitive RGB pads give you immediate hands-on control of your session view, instruments, effects and mixer.

Launch clips, control FX, play beats, and much more using 16 pads laid out in two rows of eight, to match your Ableton Live session view; one row to launch clips, and one row to stop them. Full color RGB LEDs mean they'll match the color of your clips too, while velocity-sensitivity lets you really put some feeling into your beats.

Launchkey is designed to let you shape your sound however you like, using eight rock solid rotary knobs for tweaking your instruments and effects. If you need even more control of your mixer the Novation Launchkey 49 and 61 also include nine dedicated faders.

The 25-note synth-style keyboard is lightweight, fast and very easy to play, but also velocity-sensitive so you can create truly expressive performances.

All the controls integrate seamlessly and immediately with Ableton Live, and can be reassigned to anything. Of course, if you do not use Ableton, it will map to other major music software using InControl.

Launchkey 25 is compact and tough enough to throw in your bag, so you can take it anywhere. It will work the moment you plug it into your laptop and you won’t need any drivers or power cables, because it’s class compliant and USB bus-powered on Mac or PC. 

Launchkey comes with absolutely everything you need to start making music: Ableton Live Lite, Novation Bass Station and V-Station virtual instruments, plus a comprehensive 4GB collection of production-ready samples from world-leading sample store Loopmasters. Expanded to a whopping 4GB, the Loopmasters sample library includes professional quality, royalty-free loops and one-shots, plus three fully multisampled simpler-based instruments for Ableton Live 9: Piano, Rhodes, and Hammond Organ.

XLN Audio Addictive Keys
All MIDI keyboards now come with XLN Audio Addictive Keys. The Addictive Keys virtual instrument from XLN Audio is on the house when you register your controller keyboard or the Launchpad Pro. One full license per account gives you one Addictive Keys instrument.

All Novation products come with 4 GB of Loopmasters Samples.

Features:

• Novation LAUNCHKEY-25-MK2 25-Key USB MIDI Ableton Live Lite Keyboard Controller
• Designed for Ableton Live- All controls work immediately and can be freely reassigned
  
• Full color RGB pads match the color of your clips
  
• All 16 pads are velocity-sensitive for creating dynamic drum beats
  
• Tweak your instruments and effects using eight rock solid knobs
  
• The 25-note velocity-sensitive synth-style keyboard is lightweight, fast, and very easy to play.
  
• Compact and tough enough to throw in your bag
  
• Get automatic hands-on control of other DAWs using InControl
  
• Class compliant and USB bus-powered on Mac or PC, so it works without drivers or a power cable
• Includes Ableton Live Lite, Novation Bass Station and V Station virtual instruments and over 4GB of Loopmasters samples
• Dimensions: 3.54” x 17.72” x 10.63” (H x W x D)
• Unit Weight: 4.08lbs (with accessories)
• System Requirements:
• Mac OS X 10.10 Yosemite, Mac OS X 10.9 Mavericks
  
• Windows 8.1, Windows 8, Windows 7
  
• iOS 8, iOS 7 - Camera Connection Kit or Lightning to USB Camera Adapter required (not included). Power supply required for use with iOS devices (not included)
• Software available upon registration:
  
• Ableton Live Lite music making software
  
• 4 GB of Loopmasters sounds and samples
  
• Bass Station VST and AU plug-in synthesiser
  
• V Station VST and AU plug-in synthesiser
• MIDI keyboards now come with XLN Audio Addictive Keys

---

How to Set Up RLS2400:

Video of RLS2400:

Description:

The Rockville RLS2400 DJ Foldable Laptop Stand with a Free Carrying Bag is an essential tool for the traveling laptop DJ/Musician. Constructed of aircraft grade machined aluminum, the lightweight design is perfect for traveling and the compact folded footprint of only 14” x 10.5” x .75” packs neatly and quickly into the included zipper bag.

This stand will elevate your lighting controller, small mixer, CD player, multi track recorder, and other small devices. The second shelf is perfect to hold audio interfaces, or other electronic devices. Your electronic gear will not overheat with the open arm design.

To use, simply unfold the RLS2400 and the laptop arms + base legs snap into place and stay locked in position until released. The RLS2400 elevates your laptop 14” above the table base which is the perfect height.

The arms, which hold the laptop, have a resistant coating and will securely hold any laptop firmly which fits across the legs.

Features:

• Rockville RLS2400 DJ Foldable Laptop Stand w/ Free Carrying Bag
• Multi purpose stand for laptops, lighting controllers, small mixers, CD Players, DJ interfaces, accessories, and more
  
• Heavy-duty construction machined aircraft grade aluminum – black.
• High quality, Extremely Stable, and Rugged Multi-Purpose Laptop DJ Stand
• Additional Shelf for audio interface, or other electronics
  
• Collapsible, lightweight and small when folded makes it easy to store and transport
• Saves space on the work surface by elevating laptop 14” higher
• Assembles and dis-assembles in seconds
• Folds flat for easy transport
  

Dimensions:

• Dimensions: Laptop stand platform: 14" H x 10.5" W x 10.5" D | Folded:
• 14" x 10.5" x .75"
• Weight: 4 lbs

---

How To Set Up Your APM Series Speakers:

All About Your APM5 Studio Monitors:

Unboxing Video of APM5B:

Description:

The Rockville APM5 Active Studio Monitor Comes in Pairs and each monitor will be bi-amped. What this means is that there is a separate amp for the highs and a Separate amp for the lows! Each speaker has 125 watts peak output power and 62.5 watts RMS giving you a total of 250 watts peak and 125 watts RMS per pair. We spent a lot of time developing the most premium studio monitors we ever built! I am very pleased and excited to talk to you guys about what we did to make these speakers sound as good as they do. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.

Description of the enclosure:​

We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.

Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The rear port is built to perfect spec to enhance the sound. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.

Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.

For highs, we have Ferro fluid enhanced ¾” neodymium silk dome tweeters with metal grill protection. If you are an audiophile I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without worrying about melting and blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.

We use a 5.25” woofer. This will out-perform a regular 5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids. Basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies so that the speaker can go loud without distorting. We use very high-grade crossover filters in our speakers. The specially wounded voice coils produce accurate response along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded!

Added benefits:
The rear-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!

Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your speaker can handle more power!

Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!

Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The volume control, bass, and treble controls are all found on the rear of the unit.
These Monitors have all your standard studio inputs and outputs such as a ¼” and XLR combo input jack, RCA input, 3.5MM headphone output. We also added a USB port. The reason we did this is because instead of having to use the 3.5MM or 1/4" TRS jack, you can now directly select the speakers as an output on your computer without using an interface! And you will get true stereo sound!

Features:

• Rockville APM5B 5.25" 2-Way 250 Watt Powered USB Studio Monitor Speakers in Black (Pair)
• 125 Watt RMS
• Two-Way Active Studio Monitor Speaker System
• Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers
• Enclosure is made of top quality MDF wood. Our enclosure is not particle board, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality!
• Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
• We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
• Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
• The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
• The port is built to the perfect spec to enhance the sound
• Full Range Class “D” Amplifier Circuitry with Auto-Switching Power Supply
• LED Power on Indicator on Rear Panel 
• Ferro Fluid Enhanced ¾” Neodymium Silk Dome Tweeter With Metal Grill Protection
• Tweeter has ¾” voice coil diameter 
• Curved Front Bezel Design Eliminates Standing Wave Distortion
• Injection Molded Polypropylene Cone Woofer
• Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
• Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
• Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
• We developed the most optimized magnet structure, cone, and cabinet space that reproduces the sound to play back exactly the way it was recorded!
• Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
• Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
• Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
• Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
• World class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit’s designs.
• These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brands who make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components 
• 110 Volt compatible with SMPS technology
• Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards 
• We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
• Transducer Production Line to Make the SPL Performance Stable
• One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling
• Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise). We also use a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight
• Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish

Inputs / Outputs / Controls:

• Volume control
• Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently)
• ¼” and XLR combo input jack
• High Speed USB jack
• RCA  input
• 3.5mm Headphone output 

Details:

• Certification: CE and RoHS Compliant
• Amplifier: Class D, very efficient amplifier with top components!
  (ADI--ADAU1701, TI--TPA3116, SMPS)
• System Impedance: Tweeter 6 Ω
•                                 : Woofer 4 Ω
• Signal to noise ratio: 90dB (Maximum output with THD+1<1%, A-weight)
• Max SPL: 100dB @ 1w/1m
• THD: 0.10%
• Frequency Response: 50Hz - 20 kHz
• 250 Watts peak output per pair
• 125 Watt RMS output per pair
• Each speaker produces 125 watts peak and 62.5 watts RMS 
• Input voltage: 120V
• Components: ¾” silk dome tweeter and 5.25" woofer with rubber surrounds and polypropylene cone 
• Product Size (Single): (W*H*D): 7.4'' inch x 11.34'' inch x 9.76'' inch
• Shipping Dimensions (For pair boxed): (W*H*D): 24.1'' inch x 13.54'' inch x 10.7'' inch
• Net Weight (Pair): 15.4 LBS
• Shipping Weight (Pair): 18.37 LBS
• Includes speaker linking cable and power plug
• Input Impedance (Ohms): 10 K Ohm Balanced 
• System Volume: (-30dB to +6dB)

  Owner’s Manual

---

Includes:

• PRO-M50 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼" adapter

All About Your PRO-M50:

 

Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼" adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

• Style: Closed-Back
• Design: Circumaural
• Transducer Type: Dynamic
• Driver: 40MM
• Sensitivity: 97±3dB
• Impedance: 32ohm
• Frequency Response:10Hz - 25KHz
• Max. Power: 600MW
• Rating Power: 260MW
• Net Weight: 290g (with cable)

---

All about Your RCM03:

How To Set Up Your RCM03:

How To Set Up Your RCM03 with an Interface:

How To Set Up Your RCM03 with a PSP5:

How To Set Up Your RCM03 with an IsoBOX:

Description:

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose

Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!

The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value

After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.

What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
• Metal Shock Mount
• Metal Anti-wind Foam Cap
• Owners Manual
• Warranty Card

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
• Large diaphragm for smooth, natural sound and low noise
• Power Requirements: 48V DC Phantom Power
• Uni-directional
• Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
• Output Impedance: 200O±30% (at 1kHz)
• Standard Operating Voltage: 3V
• Operating Voltage Range: 1.5V-10V
• Current Consumption: Less than 500uA
• Voltage Deduction Characteristic: within 3dB at 2V
• S/N Ratio: More than 24dB
• Frequency Response: 30Hz - 20 KHz
• Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
• Load Impedance: Greater or = to 1000 Ohms
• Equivalent Noise Level: Less than 18dB A (IEC581-5)
• Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
• Electrical Current: Greater than 4.8Ma
• Microphone Body Net Weight: 320 Grams (0.7 Pounds)
• Microphone Max.diameter: 44mm (1.73" inches)
• Microphone Length: 217mm (8.54" inches)
• Microphone Material: Steel grille + Alluminum (handheld part)
• PCB Layout: Surface mount

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

How to Set Up Your RDMS70:

Video of RDMS70:

Features:

• Rockville RDMS70 Desktop Mic Stand with Boom and Steel Round Base and Adjustable Height
• Heavy-duty weighted steel round base
• Adjustable Height
• Boom arm for precise positioning
• Rubber pad for extreme stability prevents sliding
• Low profile design
• Scratch-resistant powder coated finish

Specifications:

• Boom length: 13.8" (40cm)
• Height adjustment: 10.63" to 15.75" (27cm – 40cm)
• Base Diameter: 6.3" (16cm)
• Thread Size: 3/8"
• Weight: 4.85 lbs (2.2 kgs)

Owner's Manual​​

---

How to Set Up your RVSM1:

Video of RVSM1:

These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel.

Includes:

• (2) Near-Field Monitor Stands

Features:

• Studio Monitor Stands (Pair)
• Adjustable Height
• Steel Construction
• Nylon clutch for adjusting
• EVA Pad on top to eliminate unwanted vibrations
• Triple enforced steel base with ultimate sturdiness
• Black Color
• Weight capacity: 80 lbs.
• Adjustable height Range: 33-45 inches
• Base: 17.7 x 17.7 x 17.7 inches
• Top Plate: 9.05 x 9.45 inches
• Tube Diameter: 1.5 inch- 1.37 inch

Owner’s Manual

Owner's manual (1)

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.

---

Video of RRS190S:

Description:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam
• 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
  
• Price is for (2) pads which accommodates (2) speakers