Package Includes:

(1) JBL Control SB2210 Dual 10" Indoor/Outdoor Subwoofer 4 Restaurant/Bar/Cafe/Patio
(1) Crown Pro XLi1500 900w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 1500

Description:

The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.

Features:

• 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers
  
• 500 Watts Power handling
  
• Frequency Response Down to 38 Hz
  
• 13 x M6 Insert Points Including Inserts for Optional U-Bracket
  
• Compact, Low Profile Design

Specifications:

• Frequency Range (-10 dB): 38 Hz - 500 Hz
  
• Frequency Response (-3 dB): 48 Hz - 95 Hz
  
• Power Rating: 500W (2000W peak) Continuous Pink Noise (2 hrs) 1000W Continuous Program(2 hrs) 400W (1600W peak) Continuous Pink Noise (100 hrs)
  
• Maximum Input Voltage: 60.0VRMS (2 hrs), 120V peak
  
• Sensitivity: 95 dB, 1W @ 1m in half-space (2p loading, average 50 – 90 Hz)
  
• Max SPL: 122 dB in half-space (2p loading)
  
• Nominal Impedance: 8O
  
• Minimum Impedance: 7.2O at 160 Hz
  
• Recommended Filter: 45 Hz, 24 dB/oct high-pass filter
  
• Low Frequency: Two 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider, high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring.
  
• Enclosure Material: High Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance.
  
• Grille: Thermoset composite coated steel, zinc-plated, 3-layer foam backing.
  
• Environmental: IP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray.
  
• Terminals: Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2)
• Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection.
  
• Agency Rating: ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.
  
• Color: Black
  
• Dimensions: (H x W x D) 355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
  
• Net Weight: 23.31 kg (51.4 lb)
  
• Shipping Weight: 25.85 kg (57.0 lb)
  
• Included Accessories: 1 x MTC-PC2 input panel cover, 4 x floor standing feet 4 x beveled washers.
  
• Transformer Taps: 70V: 300W, 150W, 75W, 38W
• Transformer Taps: 100V: 300W, 150W, 75W

Authorized Crown Audio Dealer!

Description:

Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

Features:

• Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier
• RMS Power @ 4 Ohms: 450 Watts x 2 Channels
• RMS Power @ 8 Ohms: 330 Watts x 2 Channels
• RMS Power @ 8 Ohms Bridged: 900 Watts x 1
• Frequency Response: 20 Hz - 20 kHz
• THD: <0.5%
• Distortion: <0.35%
• Slew Rate: >10V/us
• Voltage Gain: 31 dB
• Damping Factor: 8 Ohms, 10 Hz to 400 Hz
• Signal to Noise Ratio (A-Weighted): >100 dB
• Crosstalk: -75 dB, -59 dB
• Input Sensitivity: 0.775V or 1.4V
• Input Impedance: 20k Ohms, 10k Ohms
• AC Voltage: 110-120V~60 Hz
• IEC Power Connector: 15A
• Stereo/parallel/bridge-mono mode
• User selectable input sensitivity - 0.775V and 1.4V
• Efficient forced-air cooling prevents excessive thermal buildup
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
• Protection against shorts, no-load, on/off thumps and radio-frequency interference
• Product Dimensions: 19" x 3.5" 12.4" inches
• Product Weight: 28 Lbs.