Description:
The Control 29AV loudspeaker from JBL Professional fills a market need for a
full range speaker, larger than other JBL Control Contractor speakers, yet more
compact than the JBL Marquis Series speakers. The two-way Control 29AV speaker
has an 8" woofer with kevlar cone for weather resistance and a 1-inch exit
compression driver mounted onto a rotatable high-frequency horn, which allows
use of the speaker in either vertical or horizontal orientation.
A low-distortion 110 degree by 85 degree rotatable horn provides smooth and even
coverage, while the extremely flat frequency response allows for outstanding
sonic character throughout the listening area. Sonic integrity is further
assured due to the sophisticated crossover network with steep slopes and
impedance compensating circuitry. The Control 29AV comes with a top-quality line
distribution transformer, designed for minimal insertion loss and reduced
saturation, which allows use on 70V, 100V or standard the 8 ohm thru operation.
JBL's exclusive SonicGuard™ overload protection, which is virtually inaudible to
the listener, ensures reliability while providing full fidelity sound. A degree
of magnetic shielding allows use of the speaker close to video monitors.
Each Control 29AV is shipped with JBL's patented InvisiBall® mounting system.
InvisiBall is simple to install, aims easily and provides a high degree of theft
deterrence. The optional MTC-29UB U-bracket provides an alternative compact
installation method and is particularly useful for low profile underbalcony
applications. In addition, ten suspension points are provided for suspending the
speaker or using a speaker stand adapter.
The Control 29AV has been designed for indoor or outdoor use. The woofer's cone
is made of kevlar, the surround is pure butyl rubber, and the driver is rear
loaded onto the baffle to minimize direct basket exposure to the elements. The
compression driver's diaphragm is pure titanium. The grille is coated in
polyethylene and comes with foam backing to minimize incursion of water.
Nickel/zinc outdoor rated input terminals ensure a secure input connection, and
an MTC-PC2 sealed-entrance cover is included to further protect terminals.
Features:
- Extended bandwidth, extremely smooth frequency response.
- 110° x 85° HF coverage, rotatable horn.
- 110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
- SonicGuard™ overload protection.
- 200 mm (8 in) Kevlar cone woofer,
- 25 mm (1 in) titanium diaphragm compression driver.
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
- optional U-bracket.
- Sealed input panel cover and screwdown input terminals.
Specifications:
- Frequency Range: 37 Hz –18 kHz (-10 dB)
- Power Capacity: 300 W Continuous Program Power; 150 W Continuous Pink Noise
- Transformer Taps 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W,
- Thru Position: 8 ohms nominal
- Frequency Response: 45 Hz – 18 kHz ( ± 3 dB)
- Maximum SPL @ 1m Short-Term: 120 dB; Long-Term: 114 dB
- Nominal Sensitivity: 90 dB (2.83V / 1m)
- Nominal Coverage Angle: 110° H x 85° V, rotatable
- Directivity Factor (Q): 7.2 dB, averaged 500 Hz to 16 kHz
- Directivity Index (DI): 8.6 dB, averaged 500 Hz to 16 kHz
- Nominal Impedance: 8 ohms
- Minimum Impedance: 6.3 ohms @ 230 Hz
- Crossover Network: 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
- Low Frequency: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
- High Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
- Enclosure Material: High impact polystyrene
- Grille: Thermoset composite coated steel, WeatherMax multi-layer foam
- Overload Protection: Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
- Environmental: IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
- Terminations: Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
- Safety Agency Rating: Transformer is listed per UL1876
- Colors: Black or white (-WH)
- Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
- Net Weight (ea): 12.2 kg (26.8 lb.)
- Shipping Weight (ea): 14.0 kg (30.8 lb.)
- Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
- Optional Accessories: MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
- UPC:
- 613816453269
