Package Includes:
- (1) Peavey Classic 50 410 2-Channel 50 Watt Tube Guitar Amplifier
- (2) Rockville RCGT20B 20' Nickel-Plated Black Cables
Authorized Peavey Dealer!
Video of CLASSIC 50/410:
Originally launched in 1991, these versatile all-tube amps retain their distinctive sound and circuitry but now feature an updated chassis design. With three 12AX7s up front and four EL84 power amp tubes plus normal and bright inputs, 3-band passive EQ, and presence control, it's all the classic tone you seek and all the gigging versatility you need.
Features of CLASSIC 50/410:
- Peavey Classic 50 410 Guitar Amplifier Tweed Combo
- Normal and bright inputs
- Four EL84s and three 12AX7s
- 3-band passive EQ
- Presence control
- Normal and lead volume
- Lead pre- and post-gain
- Master volume
- Reverb control
- Effects loop
- Fan cooled
- Chrome-plated chassis
- Tweed covering
- Four 10 inch Blue Marvel® speakers
- Footswtich for channel switching and reverb (included)
- 50 watts (rms) into 16 or 8 ohms
Details:
- POWER AMPLIFIER SECTION
- Four 6BQ5/EL84’s with 12AX7 driver
- Rated Power & Load:
- 50 W RMS into 16 or 8 ohms
- Power @ Clipping (Typically):
- (5% THD, 1 kHz, 120 V AC line)
- 50 W RMS into 16 or 8 ohms
- (Bias must be reduced to measure)
- Frequency Response:
- +0, -2 dB, 50 Hz to 15 kHz, @ 40 W RMS into 16 ohms
- Hum & Noise:
- No greater than 80 dB below rated power
- Power Consumption:
- 200 watts, 50/60 Hz, 120 VAC (Domestic)
- PREAMP SECTION
- Two 12AX7’s
- The following specs are measured @ 1 kHz with the controls
- preset as follows:
- Pre & Post (lead) @ 0
- Reverb Level @ 0
- Bass & Treble EQ @ 12
- Middle EQ @ 0
- Master Volume @ 12
- Presence @ 6
- Nominal level is with Input Gain @ 6.
- Minimum level is with Input Gain @ 12.
- Preamp Normal Input:
- Impedance: Very high Z, 470 K ohms
- Lead Channel (Post Gain @ 10):
- Nominal Input Level:
- -40 dBV, 10 mV RMS
- Minimum Input Level:
- -70 dBV, 0.3 mV RMS
- Normal Channel:
- Nominal Input Level:
- -17 dBV, 140 mV RMS
- Minimum Input Level:
- -28 dBV, 40 mV RMS
- Maximum Input Level:
- 0 dBV, 1.0 V RMS
- Preamp Bright Input:
- Impedance: Very high Z, 470 K ohms
- +12 dB boost @ 2 kHz
- Equalization:
- (Lead and Normal Channels)
- Custom bass, middle, and treble passive-type EQ
- Effects Send:
- Load Impedance: 1 K ohm or greater
- Nominal Output Level: -6 dBV, 0.5 V RMS
- Effects Return:
- Impedance: High Z, 2 M ohms
- Designed Input Level: -6 dBV, 0.5 V RMS
- (Switching jack provides Effects Send to Effects Return
- connection when not used.)
- External Footswitch Function:
- Reverb Defeat (when reverb control is raised)
- Normal/Lead Channel Select (when Lead activated)
- Click Here To View The User Manual (Link Opens In A New Window)
Video of RCGT20B:
Description:
All
Rockville pro audio cables are made with 100% copper which boosts
the efficiency of the cable. There is nothing better than 100% copper.
Most of the cheaper cables on the market do not use 100% copper, instead
they make their cables with CCA (Copper Clad Aluminum). CCA cables do
not perform on the level that 100% copper cables perform at. CCA will
not conduct signals efficiently. A 12 gauge CCA cable will not even
perform as well as a 14 gauge 100% pure copper cable, which will in
turn, affect the performance and longevity of your equipment. If you
find cables on the market that do not mention the copper content, there
is a good chance that they are selling you a cheaper cable that is CCA
and not 100% copper. Rockville pays an inspection company to oversee
the manufacturing of the product to ensure that we provide a 100% Oxygen
Free Copper Cable (OFC). Our OFC cables are less prone to oxidation,
and will provide maximum signal transfer.
The other important
factor of a cable is the shielding. Most of the good brands on the
market have about 85% shielding coverage, so we decided to take
our shielding a step further. Rockville cables are shielded with a tight
copper mesh, covering 90% of the cable! The high percentage of coverage
increases the ability to absorb the Electromagnetic Interference (EMI)
and Radio Frequency Interference (RFI) that suppresses signal and
degrades the performance of equipment. Rockville Cable’s copper
shielding provides great flexibility, maintains a durable structural
integrity, while decreasing signal interference ensuring enhanced signal
clarity with every use.
- Rockville RCGT20 1/4'' TS to 1/4'' TS Guitar / Instrument Cable
- 24 AWG 100% Copper Conductors for Enhanced Signal Clarity
- Nickel Plated, 1/4" Straight-to-Same Connectors
- High Density 90% Coverage OFC Braid Shield for Superior EMI and RFI rejection
- Length: 20 Ft
- Color: Black
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free ;warranty.
- UPC:
- 613816134595
