- (1) Peavey Classic 50 410 2-Chnl 4x10 50 Watt Tube Guitar Amplifier Tweed Combo
- (1) SKB 1SKB-66 Electric Hard-Shell Guitar Rectangular Case
- (1) Audio Technica ATH-M30X Pro Studio Monitor Collapsible Headphones
- (2) Rockville RCGT20B 20' 1/4'' TS to 1/4'' TS Instrument Cables-Black
Authorized Peavey Dealer!
Video of CLASSIC 50/410:
Originally launched in 1991, these versatile all-tube amps retain their distinctive sound and circuitry but now feature an updated chassis design. With three 12AX7s up front and four EL84 power amp tubes plus normal and bright inputs, 3-band passive EQ, and presence control, it's all the classic tone you seek and all the gigging versatility you need.
Features:
- Peavey Classic 50 410 Guitar Amplifier Tweed Combo
- Normal and bright inputs
- Four EL84s and three 12AX7s
- 3-band passive EQ
- Presence control
- Normal and lead volume
- Lead pre- and post-gain
- Master volume
- Reverb control
- Effects loop
- Fan cooled
- Chrome-plated chassis
- Tweed covering
- Four 10 inch Blue Marvel® speakers
- Footswtich for channel switching and reverb (included)
- 50 watts (rms) into 16 or 8 ohms
Details:
- POWER AMPLIFIER SECTION
- Four 6BQ5/EL84’s with 12AX7 driver
- Rated Power & Load:
- 50 W RMS into 16 or 8 ohms
- Power @ Clipping (Typically):
- (5% THD, 1 kHz, 120 V AC line)
- 50 W RMS into 16 or 8 ohms
- (Bias must be reduced to measure)
- Frequency Response:
- +0, -2 dB, 50 Hz to 15 kHz, @ 40 W RMS into 16 ohms
- Hum & Noise:
- No greater than 80 dB below rated power
- Power Consumption:
- 200 watts, 50/60 Hz, 120 VAC (Domestic)
- PREAMP SECTION
- Two 12AX7’s
- The following specs are measured @ 1 kHz with the controls
- preset as follows:
- Pre & Post (lead) @ 0
- Reverb Level @ 0
- Bass & Treble EQ @ 12
- Middle EQ @ 0
- Master Volume @ 12
- Presence @ 6
- Nominal level is with Input Gain @ 6.
- Minimum level is with Input Gain @ 12.
- Preamp Normal Input:
- Impedance: Very high Z, 470 K ohms
- Lead Channel (Post Gain @ 10):
- Nominal Input Level:
- -40 dBV, 10 mV RMS
- Minimum Input Level:
- -70 dBV, 0.3 mV RMS
- Normal Channel:
- Nominal Input Level:
- -17 dBV, 140 mV RMS
- Minimum Input Level:
- -28 dBV, 40 mV RMS
- Maximum Input Level:
- 0 dBV, 1.0 V RMS
- Preamp Bright Input:
- Impedance: Very high Z, 470 K ohms
- +12 dB boost @ 2 kHz
- Equalization:
- (Lead and Normal Channels)
- Custom bass, middle, and treble passive-type EQ
- Effects Send:
- Load Impedance: 1 K ohm or greater
- Nominal Output Level: -6 dBV, 0.5 V RMS
- Effects Return:
- Impedance: High Z, 2 M ohms
- Designed Input Level: -6 dBV, 0.5 V RMS
- (Switching jack provides Effects Send to Effects Return
- connection when not used.)
- External Footswitch Function:
- Reverb Defeat (when reverb control is raised)
- Normal/Lead Channel Select (when Lead activated)
- Click Here To View The User Manual (Link Opens In A New Window)
Description of 1SKB-66:
1SKB-66
Re-designed exterior with larger bumper protected corners and contoured stacking points for added convenience. Accommodates SKB's patented TSA recognized and accepted trigger release latching system and a comfortable rubber over-molded handle The SKB-66 is designed for traditional body styles, both left and right handed Strat and Tele type guitars. A thirty year standard in universal fit electric cases. With a fitted interior with full neck support and Deluxe Plush protection on all sides.
Features:
- Patented Fiberglass reinforced nylon trigger release latching system
- TSA recognized and accepted locks
- Bumper protected valance
- Contoured exterior with stacking points
- Injection molded feet
- Indestructible cushioned rubber over-molded handle
- Full length neck support
- Rigid EPS foam interiors with plush coverning to keep guitar from slipping
- Accessories compartment
Weights & Dimensions:
- Interior Length: 39.00 in / 99.06 cm
- Exterior Length: 43.63 in / 110.81 cm
- Exterior Width: 15.75 in / 40.01 cm
- Exterior Depth: 5.00 in / 12.70 cm
- Instrument Body Length: 16.00 in / 40.64 cm
- Instrument Body Depth: 2.00 in / 5.08 cm
- Instrument Lower Bout: 12.75 in / 32.39 cm
- Instrument Upper Bout: 11.50 in / 29.21 cm
- Shipping Weight: 41.00 lb / 18.60 kg
- Product Weight: 10.10 lb / 4.58 kg
Advantages of SKB Cases:
- Lifetime SKB Warranty! No questions asked! No receipts required! For any defective products; Send back to SKB and they will replace it or repair it!
- Very light-weight!
- Advanced Engineering Giving SKB Superior Stregnth Compared To Any Other Cases On The Market
- Maximum Impact Resistance Protects Your Equipment Better Than Anything Else
- These Cases Can WithStand All Sorts Of Punishment
- Great Value! The Price On SKB Are Extremely Aggressive
- Detailed Information And Dimensions Of All Products
Description of ATH-M30X:
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
Features:
- Audio Technica ATH-M30X Professional Studio Monitor Collapsible Headphones
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Collapsible for space-saving portability
- Designed to excel for studio tracking, mixing and field recording
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 22,000 Hz
- Maximum Input Power: 1,300 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 220 g (7.8 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessories Included: Protective carrying pouch, 6.3 mm (1/4“) screw-on adapter
Video of RCGT20B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
- Rockville RCGT20 1/4'' TS to 1/4'' TS Guitar / Instrument Cable
- 24 AWG 100% Copper Conductors for Enhanced Signal Clarity
- Nickel Plated, 1/4" Straight-to-Same Connectors
- High Density 90% Coverage OFC Braid Shield for Superior EMI and RFI rejection
- Length: 20 Ft
- Color: Black
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
- UPC:
- 613816020164
