- (1) Peavey Classic 30 112 30w Tube Guitar Amplifier w/ 12" Speaker Tweed Combo Amp
- (1) BBE Windowpane Silicon Fuzz Distortion Guitar Effect Pedal w/ True Bypass
- (1) Rockville RWM60U Professional UHF Headset & Guitar Wireless Microphone System
- (1) Rockville RDS40 Portable DJ/Guitar/Drum/Keyboard Padded Throne/Chair Adjustable
Authorized Peavey Dealer!
Description of Classic 30 112:
Revered by blues, country and rock players alike, these true all-tube amps span the tonal landscape from vintage to contemporary with ease. These amps are drenched in the tone that can only come from the combination of three 12AX7 and four EL84 tubes. Add features like 3-band EQ, footswitchable dual channels, footswitchable boost and reverb and you have one of the most versatile amplifiers on the market. The Classic 30 now ships with the all new Celestion Midnight 60 12" speaker! Classic looks, classic tone, Classic 30!
Features:
- Peavey Classic 30 112 30w Tube Guitar Amplifier w/ 12" Speaker Tweed Combo Amp
- Genuine Spring Reverb with level control
- Pre- and post-gain controls on lead channel
- External speaker capability
- Chrome-plated chassis
- Classic tweed covering
- Footswitch included
- 30 watts (rms) into 16 or 8 ohms
- 2-channel preamp
- Footswitch selectable channel switching, reverb and boost
- Four EL84s and three 12AX7s
- 12" Celestion Midnight 60 speaker
- Effects loop
- Channel and Boost switch uses Peavey part number 03054360
- Width Packed: 13"(33.02 cm)
- Normal volume control on clean channel
- Height Packed: 21.5"(54.61 cm)
- Reverb on/off switch uses Peavey part number 03051000
- Boost switch
- 3-band passive EQ (bass, middle, treble)
- Standby Switch
- Weight Unpacked: 39.50 lb(17.917 kg)
- Weight Packed: 46.00 lb(20.865 kg)
- Width Packed: 19.25"(48.895 cm)
- Height Packed: 21.5"(54.61 cm)
- Depth Packed: 13"(33.02 cm)
Description of Windowpane:
Imagine a killer fuzz tone like Jimi at his best, with that creamy fuzz driving his Marshall into incredible sustain. For many fans, that tone is their holy grail. Unfortunately, the quest to find it is more like “chasing the dragon” because there’s so much hype and misleading information out there. Windowpane cuts through that nonsense with experienced engineering for tone so authentic you’ll swear the grail has landed on your pedal board.
The all-analog Windowpane’s two sequentially-wired silicon transistors are properly biased at the factory and the tone is dialed in with a carefully selected treble roll-off on the second transistor, recalling the slightly mellowed top end of early germanium transistor fuzz pedals. But unlike those old classics, Windowpane fuzz pedals are remarkably consistent from one to the next, thanks to reliable, predictable silicon transistors and low-tolerance 1% metal-film resistors. Add in high-voltage poly caps on a rugged circuit board and Windowpane delivers the mind-altering fuzz tone you’re after, gig after gig. And when you don’t want to melt faces, a properly engineered true hardwire bypass means signal passes entirely around the circuit, from input jack to output jack without a hint of loading.
Stop chasing the dragon and pick up a Windowpane, the experienced fuzz.
Features:
- BBE Windowpane Silicon Fuzz Distortion Guitar Effect Pedal w/ True Bypass
- Hand-biased silicon transistors
- 50K Ohms Low Z input for authentic vintage fuzz pickup loading
- 10K Ohms output impedance when engaged
- 1% metal-film resistors for consistency
- High-voltage poly caps for better tone
- Military-spec circuit board for reliability
- Blue status LED for high visibility and low power consumption
- Easy access battery compartment
- True hardwire bypass
- 5-year warranty
How to Set Up Your RWM60U:
Video of RWM60U:
Authorized Rockville Dealer !
Includes :
- 1 wireless headset microphone
- 1 receiver unit
- 1/4” Guitar cable
- User manual
- Batteries
- Power adapter
Features:
- Rockville RWM60U Single Wireless UHF Headset Microphone System
- High performance wireless microphone system
- Includes transmitter with one high sensitivity, unidirectional, wireless cardioid headset microphone
- High sensitivity, unidirectional, wireless cardioid microphone
- Featuring a dual filter design to limit feedback and interference
- Ultra signal stability eliminates unwanted distortion
- Professional receiver with a multifunction color display shows frequency, signal synch, and audio input
- Transmitter automatically links to receiver for ease of use
- Rugged metal housing
- Comfortable ergonomic composite microphone construction
- Low power consumption for longer battery life
System :
- Operating Range: 300´ – 400´(indoor), 250´ – 350´(outdoor)
- Channel: One Channel
- Frequency Range: 520MHz - 590MHz
- Frequency Stability: ±0.005%
- Modulation Mode: UHF
- Frequency Response: 50Hz - 15KHz (±3 dB)
- Dynamic Range: 105dB
- S/N: 100dB
- T.H.D: < 0.5% (1KHz)
- Audio Output Jack: XLR balanced 1/4" mixed
- Power Supply: 110V
- Operating Temperature: 3°F - 130°F
- Mic Battery Operating Time: up to 10 hours
- Oscillation mode: Quartz Crystal
- RF Output Power: 10mW
- Output Level: 0 – 300mV
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
Video of RDS40:
Rockville RDS40 Portable Performers Chair/DJ/Guitarist/Drummer/Keyboardist/Musicians Chair
The Rockville RDS40 portable performers chair is suitable for DJ’s and all types of musicians. Its lightweight and features an easy fold-and-go design, so it’s portable and easy to transport. The chair is constructed of heavy duty steel tubing and has a sturdy load capacity of up to 300 pounds.
The 12” circular foam padded seat features extra cushioning so that prolonged use does not cause distress, pressure or fatigue. The unique lean in design allows performers and DJ’s to remain sitting but look like they are leaning over and standing during their performance. This allows you to stay comfortable without looking like you’re sitting down on the job. Also included is a rubberized cushioned foot rest to reduce foot fatigue during long gigs.
With 5 adjustable heights, from 21” to 30” the RDS40 will fit any performer and at any workable height. The rear backrest is also nicely padded for extra comfort and adjusts in height with the seat. The tool-less design allow you to easily assemble and adjust both the seat and back rest height with just the twist of a knob.
Features:
- Rockville RDS40 DJ Chair Portable DJ/Guitar/Drum/Keyboard Padded Throne/Chair
- Sturdy steel lightweight construction
- 5 adjustable levels from 21\"-30.75\" high
- Sit back at a comfortable height
- Reduces fatigue and stress on your back and legs
- Stay comfortable without looking like you are sitting down on the job
- Lean on it while mixing
- Hides behind your rig in comfort
- Holds up to 300lbs
- 12" circular foam padded seat
- Removable back rest
- Dimensions (exterior): 18" x 39" - 47.5 x 17"
- Weight: 12 lbs
- Shipping dimensions (exterior): 18"W x 21"H x 7"D
- Shipping weight: 13 lbs
- UPC:
- 613815897354
