- (1) Novation CIRCUIT Groove Box Music Controller Pad/Drum Machine+Ableton Live Lite
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
- (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables
Authorized Novation Dealer!
Videos of CIRCUIT:
All You Need To Make Music -
Anywhere
Compact and battery powered with a powerful built-in speaker, Circuit
can be used to make music entirely on its own. In the studio it will
work alongside your standalone synth gear and run in sync with your
music software too. Circuit is all you need to inspire, create and play
new tunes
Build Ideas Quickly
Embrace a new way to make music. Circuit's split grid shows your steps
and notes at the same time, so you can sequence and play while seeing
exactly what's going on. Build up your parts quickly and easily, either
by programming each step or capturing your performance in real-time.
Ideas in Seconds. Tracks in Minutes
Circuit inspires, straight out the box. It combines a 2-part synthesiser
and a 4-part drum machine with a 4x8 RGB velocity-sensitive grid
sequencer, which will have you finding new musical directions and
creating electronic grooves in no time.
Cutting Edge Sound
Building on our true Nova heritage, Circuit delivers cutting-edge sound
with production-ready monophonic and polyphonic patches and tons of
character for easily creating deep bass lines, epic leads and warm pads.
Combine Simplicity and Experimentation
Use simple streamlined modes to keep your harmonies, rhythms and
melodies locked in time and key while you make riffs, hooks and chords.
Or start experimenting for some serious sequencing exploration.
Stand Alone
Compact and battery-powered, Circuit truly stands alone. You can create
entire tunes from scratch without a laptop, then save them and play them
back live. You don’t even need speakers, because it has one built in. Of
course, Circuit will plug in to your sound system and work with your
computer and other synth gear too, via its Line Outs, USB and MIDI
ports.
Looking for the Perfect Beat
Velocity sensitive RGB pads let you quickly build expressive drum beats,
by step sequencing or playing the wide range of drum sounds. Define your
sound with total control over pitch, decay, distortion and EQ.
Build Whole Tunes with Effects
Create an entire tune by combining up to 128 steps of synth and drum
patterns, then adding space, depth and energy to your music with
built-in effects. Sidechain your synths to the kick drum to get them to
pump. When you’re done, save your tune to one of 32 slots.
Easily Tweak Your Sound
Sculpt your sound using eight macro knobs allowing you to subtly tweak
or completely transform each patch. Then add movement and rhythm by
recording or sequencing your performance.
Circuit Components
Supported by an online suite of tools that is constantly evolving, take advantage of regular updates and new functionality to customise your Circuit. For example, simply drag and drop samples onto Circuit with Sample Import, using the streamlined browser-based Web MIDI workflow, and create your own sound library.
Features:
- Novation CIRCUIT Groove Box Music Controller
Pad/Drum Machine+Ableton Live Lite
- A powerful electronic music workstation with Nova-series synth engines and sequencing
- Comprehensive RGB-backlit 4 x 8 pad matrix makes playing and sequencing intuitive
- 2-part Nova-series analog-modeled synthesizer with 64 presets delivers amazing sound
- 4-part rhythm machine lets you lay down beats and create compelling drum sequences
- Perform live with or without real-time quantization or step sequence on a detailed grid layout
- Lock your synths to a specific key to quickly
create music without worrying about wrong notes
- Store your creations in 32 slots for performance and easy recall
- Battery power and built-in speaker let you create and perform music anywhere
- USB and MIDI connections provide compatibility with the rest of your electronic music gear
- Includes Ableton Live Lite and 1GB of Loopmasters sounds and samples
- Product Hardware
- 32 RGB backlit velocity sensitive button grid
- 28 RGB backlit function buttons
- 8 Continuous pots with RGB indicator LEDs
- Dedicated filter and volume pots
- 1/4" jack sockets for left and right outputs
- Two MIDI sockets (3.5mm jack sockets with MIDI din
break-out cables)
- USB socket
- Front-mounted 3.5mm jack socket for headphones
- Integrated speaker
- Rubberised knob caps
- Rotary controls secured to the chassis with metal
nuts
- Circuit can be powered using 6x AA batteries or a
power supply (both included). It can not be powered via USB Maximum
power consumption 12V DC 600mA
- Dimensions: 240mm W x 200mm D x 35mm H
- Sound Engine
- 2 Nova synths
- 4 Part drum machine
- 6 Note polyphonic per synth
- 64 Synth patches
- 64 Drum patches
- 8 Synth macro controls (Control up to 4 parameters
with one knob)
- 4 Drum parameter controls (Pitch, Decay,
Distortion, Filter)
- Mixer view with levels and mutes
- Master FX with individual track sends
- 16 Delays
- 8 Reverbs
- Sidechain effect (7 types and off). Triggered from
Drum 1
- Hi-pass / low-pass master filter
- Sequencer
- 32 Sessions
- 6 Tracks per session (2 Synth and 4 Drum)
- 8 Patterns per track (Synth 1, Synth 2, Drum
1&2, Drum 3&4)
- 16 Demo sessions
- Real time record (notes, with velocity and
automation)
- Auto-quantise notes to steps and automation to 6
events per step
- 50 Automation parameters (up to 4800 events per
pattern)
- Internal tempo range 40 - 240
- External synced tempo range 30 - 300
- Swing 20 - 80%
- Real Time Performance
- Full range velocity scanning and record. Editable
to 16 levels
- 16 Scale types and chromatic transposition
- Synth expand view doubles playable area
- Drum expand view allows real time drum record
- Octave (input) and pattern octave (edit)
- Pattern length and nudge
- Configurable pattern chain
- Session instant switching and queued switch
- Editing
- Velocity and gate per step
- Multiple gate lengths per step (via real time
record)
- Automation edit per step
- Clear step, automation parameter per pattern,
pattern, session
- Duplicate step, pattern
- Circuit Firmware Version 1.5
- Fractional Gate – the gate length for a note no longer has to equal one step, it can be shorter or longer. With 6 times the resolution you can add expressivity to your tracks like never before on Circuit.
- Synth Patch Preview – this now allows you to audition synth patches in a similar way to Drum Preview.
- MIDI CC Send and Receive – this means MIDI CC data can be turned on or off to prevent any unwanted parameter changes.
- Sample Flip: The Sample Flip function lets you create multi-sample drum lines on each of Circuit’s drum tracks. In previous versions of Circuit firmware, only one sound could be used on each drum track. Now, you can select a different sample for each step in all four of the drum tracks. So for example, you can have a kick and a snare on ‘Drum1’, freeing up other tracks for additional instrumentation or sample playback. This totally transforms Circuit’s drum- and sample-programming functionality and opens it up to new styles of music.
- Polyrhythmic Drum Patterns: The length of drum patterns 1/2 and 3/4 can now be set independently of the other pair to create mind-bending polyrhythms and pattern variations.
- Components Standalone: Components Standalone lets Circuit owners access all of the features of the Components software, without needing to login or to have an active Internet connection.
- Fractional Gate – the gate length for a note no longer has to equal one step, it can be shorter or longer. With 6 times the resolution you can add expressivity to your tracks like never before on Circuit.
- Synth Patch Preview – this now allows you to audition synth patches in a similar way to Drum Preview.
- MIDI CC Send and Receive – this means MIDI CC data can be turned on or off to prevent any unwanted parameter changes.
- All Novation products come with 4 GB of Loopmasters Samples.
All about Your RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 320 Grams (0.7 Pounds)
- Microphone Max.diameter: 44mm (1.73" inches)
- Microphone Length: 217mm (8.54" inches)
- Microphone Material: Steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
How to Set Up RMC-XLR:
Video of RMC-XLR:
The
Rockville RMC-XLR is the same exact microphone we use in our Pro Mic
Kit 1 microphone/stand bundle. This mic was created because we saw a
need in the market for a high quality microphone at an affordable
price. We found there were a lot of good mics around from reputable
brands that sound great, but are very expensive. When we looked at the
cheaper mics on the market from both reputable and entry level brands;
we were not impressed at all. As a result we sent our very own product
developers on a mic testing journey. A lot of our employees here at
Rockville love to do karaoke, so it was not long before we found a mic
that we all loved.
You may be asking yourselves, so what makes this mic sound so good?
There are 3 main components that make a mic sound the way it does. The
cartridge, the magnet, and the mic cable. Our mic uses an M-56
cartridge which has a neodymium magnet. This combination of components
supplies better sensitivity; which means your mouth will not have to
be on the mic for it to pick up the sound. Our components supply more
than a great pickup pattern. They have very little background noise,
and great tone.
We pay a lot of attention to detail. We could have saved a lot of
money and got our cost down by including a cheap cable, but we know
how important the cable is. We are very passionate about our products
and we really have a lot of respect for our customers. For this reason
alone we included 100 % OFC copper cables. There is no aluminum in
this cable! It is Pure oxygen free copper. What this means is that the
cable will last longer and will sound a lot better. You will get a
distortion free signal. We use a true gauge mic cable with proper
thickness.
The body of the microphone is also something we paid a lot of
attention too. We did not want it to be too light and feel cheap. We
made a nice solid metal microphone. It has a great feel to it. We
could have gone with plastic or cheaper metal, but we wanted to go
with a mic that we ourselves would want to use.
90 Day Money Back Guarantee including return shipping!
If
within the first 90 days you are not 100 % satisfied for any reason,
contact us and we will send you a return label and give you all your
money back! (Item must be returned complete with all accessories and
the original box please).
What's Included:
- Fully
metal wired mic
- (2) 100% OFC Copper Mic
cables (XLR to ¼” + XLR to XLR )
- Mic
clip
- Plastic
carry case
- Owner’s
manual
- Warranty
Features:
- Rockville RMC-XLR High-End Metal
Handheld Wired Microphone Mic Amazing Sound!
- Mic
Features:
- M-56
Cartridge
- Full
metal mic body
- Type:
dynamic
- Neodymium
magnet
- Polar
Pattern: uni-directional
- Frequency
Response: 80 - 13Khz
- Impedance:
600 Ohms ± 30%
- Sensitivity:
-72 ± 3dB
- Case
Features:
- High
quality plastic carry case protects the mic during transportation
- Comfortably
holds microphone and mic cable
- Cable
Features:
- XLR to ¼” Cable
- XLR to XLR Cable
- 10
Feet each
- 100%
OFC oxygen free copper
- Cable
delivers crystal clear distortion free signal
- Cable
is 5 MM thick with cover (22 AWG standard mic cable)
- XLR
cable connectors are very solid and durable
- Mic
clip Features:
- Heavy
Duty Standard Size Microphone Clip
- Stand
Mountable
- Solid
Plastic Construction with copper inside (part that screws to the
mic)
- Black Color
- UPC:
- 613815973133
