- (1) Presonus Central Station Plus Studio Monitoring Processor With CSR-1 Remote
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam
- (1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
#1 Authorized PreSonus Internet Dealer!
Central Station Plus Includes:
- (1) Central Station - Studio Control Center
- (1) CSR-1 Remote Control for Central Station
Take Command of Your Monitor Speakers
You mostly monitor on near-fields, but occasionally switch to big, honking Main speakers or a second set of near-fields. You want to hear what your mix sounds like with and without subwoofer bass. And you want to be able to monitor straight from digital sources as well as analog. Meet the Central Station PLUS.
It's one of our most popular products for professional studios because it provides the perfect combination of stereo inputs, outputs, and recording-communication functions, allowing you to easily manage multiple sources and monitor speakers.
With Central Station, you can easily switch between three sets of stereo, analog input sources with individual level controls. Two stereo S/PDIF digital sources connect via one coax and one Toslink optical port. You can audition these sources with up to three pairs of speakers, with individual trim pots for each speaker—recessed to avoid accidents. You also get a pair of line-level main outputs, a pair of line-level cue outputs to feed a headphone-distributions system (such as our HP60 or HP4), and two screaming-loud headphone amplifiers with individual level controls.
Finally, with the included Control Station Remote (CSR-1), you can remote-control the Central Station's main volume, input select, output select, talkback, mute, dim, and mono functions from your desktop. The CSR-1 wires to the Central Station via a DE15 connector, enabling you to keep the Central Station in your rack and control it from your work surface, providing maximum convenience with minimum wiring.
The Professional's Choice
The pros know that for critical listening, a monitor-control system must be as sonically transparent as possible. That's why we gave the Central Station an audiophile-quality, passive signal path, with no op-amps or ICs, and equipped the S/PDIF inputs with high-definition, 24-bit, 192 kHz D/A converters that deliver 115 dBu of dynamic range.
To enable you to watch your levels, the Central Station sports dual 30-segment, tri-colored, fast-acting, peak-hold LED meters, which can display dBu and dBfs. You can calibrate these meters to match your DAW or other audio device, and a handy switch lets you clear the peak-hold.
Speak to the musicians over the headphone and cue buses using the onboard talkback microphone or connect a mic to the XLR talkback input. The cue signal is automatically dimmed when you use the talkback mic, and a jack admits a footswitch for hands-free talkback operation. Finally, with the optional CSR-1, you can remote-control the Central Station's main volume, input select, output select, talkback, mute, dim, and mono functions.
With pristine audio quality; the ability to switch between multiple analog and digital sources and three sets of speakers; fast, accurate metering; and all of the extras that make your studio work easier and more efficient, it's obvious why the Central Station is the professional engineer's choice for monitor control.
Features:
- 3 sets of stereo analog inputs let you switch between sources
- 2 sets of S/PDIF digital inputs (coax and optical)
- 3 sets of stereo speaker outputs with:
- Speaker Select switches
- Recessed trim pot for each speaker output
- Cue section with:
- Input-select switch
- Output-level control
- Main section with:
- Input-select switch
- Aux-input level control
- Output-level control
- Mute, Dim (-20 dB), and Mono switches
- 2 headphone outputs, each with:
- Dual-function volume controls
- Main-Cue input switches
- Passive audio path: no op amps or IC's in main audio path
- Onboard talkback microphone
- Talkback microphone input w/level control (feeds headphone and cue outputs)
- Dual 30-segment, fast-acting, peak-hold LED metering (dBu and dBfs) with:
- Clear Peak switch
- Calibrate to match DAW or other audio device
- Footswitch jack for hands-free talkback operation
- Included Control Station Remote (CSR-1) provides remote control of:
- Main Volume
- Input select
- Output select
- Talkback
- Mute
- Dim
- Mono
- Input/Output
- 4 balanced ¼" analog line inputs (2 L/R pairs)
- 2 unbalanced RCA analog line inputs (L/R pair)
- 1 stereo S/PDIF optical (TOSLINK) digital input
- 1 stereo S/PDIF coax (RCA) digital input
- 1 balanced XLR talkback-microphone input
- 6 balanced ¼", line-level speaker outputs (3 L/R pairs) w/separate, passive volume controls
- 2 balanced ¼", line-level Main outputs (1 L/R pair) with source selection
- 2 balanced ¼", line-level Cue outputs (1 L/R pair) with volume control and source selection
- 2 stereo ¼" headphone jacks w/dual-function volume controls and Main-Cue input switches
- 1 DB15 port for optional Control Station Remote (CSR-1)
- Digital
- S/PDIF coax and optical digital inputs
- High-definition, 24-bit, 192 kHz D/A converters (115 dBu dynamic range)
- Physical
- 1U 19" rack-mountable, rugged steel chassis
- External AC power supply
Click here to view
All about Your RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 320 Grams (0.7 Pounds)
- Microphone Max.diameter: 44mm (1.73" inches)
- Microphone Length: 217mm (8.54" inches)
- Microphone Material: Steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
How to Set Up Your RockShield 3:
Includes:
- 5 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
- RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels: 5 pcs
- Dimensions Each Panel: 6.3'' x 12.2'' inch
- Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
- UPC:
- 613815973508
