Package Includes:

• (1) Crown CDi2000 2-Channel, 800w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp
• (3) Pairs of JBL Pro CONTROL 25AV 5.25" 60 Watt 70v Indoor/Outdoor Commercial Speakers
• (5) Pairs of JBL CONTROL 16C/T-BK 6.5" 30w 70v Commercial Ceiling Speakers 4 Restaurant/Bar

---

Authorized Crown Dealer! 

Video of CDI2000 :

 Features:

• Crown CDi2000 2-Channel, 800w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp 
• Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.
• Switch-mode universal power supply.
• Intuitive front-panel LCD screen for quick, easy configuration.
• Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.
• Up to 20 user defined DSP presets are available.

Specifications:

• Channels: 2
• Sensitivity (for full rated power at 8 ohms): 1.4V
• Rated Power Output (per channel @ 4 ohms): 800W Stereo
• Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)
• THD: < 0.5%
• Damping Factor (20 Hz to 400 Hz): > 500
• Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB
• Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB
• Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced
• Dimensions: 3.5" x 19" x 12.25"
• Weight: 22.0 lbs
• IEC Power Connector: 15A

---

Video of CONTROL 25AV :

Description:

The JBL Control 25AV is a Two-Way 200-Watt Permanent Install Monitor that produces smooth, highly-detailed audio with outstanding coverage. With its consistent audio performance on both 70V and 100V distribution lines, the video-shielded Control 25AV is ideal for the small club and restaurant owner in search of a monitor with the compact, unobtrusive design and ruggedness required for both indoor and outdoor use.

Features:

• (2) JBL Pro CONTROL 25AV 5.25" 200w Indoor/Outdoor/Restaurant/Bar/Home Speakers
• 200-Watts Continuous Power Capability
• 5 1/4" Polypropylene Coated Woofer
• 3/4" Titanium Tweeter
• Shielded for use near video monitors
• Stainless steel grille for harsh environments
• 60-Watt transformer for 70V and 100V lines, with 8 ohm thru
• Includes Invisiball mounting hardware and sealed input panel cover
• 100° x 100° high-frequency horn
• Sonicguard overload protection

Specifications:

• Active or Passive: Passive
• Frequency Response: 70Hz to 23kHz
• Power Capacity: 200 Watts Continuous
• Maximum Sound Pressure Level (SPL): Not specified by manufacturer
• Nominal Sensitivity: 87dB (1W/1m)
• Impedance: 8 Ohms
• Crossover: 3kHz
• Shielded: Yes
• Low Frequency Driver: 5 1/4 in. polypropylene coated
• High Frequency Driver: 3/4 in. titanium
• Enclosure Material: High-Impact Polystyrene enclosure
• Input Connections: Zinc-plated screw down input terminal strip
• Environmental: Stainless steel grille for harsh environments
• Dimensions: 9.3 x 7.4 x 6.3 in. (236 x 186 x 159mm) (HxWxD)
• Weight: 9 lbs. (4.0 kg)
• Specialties: White
• Package Weight: 20.75 lb
• Box Dimensions (LxWxH): 15.4 x 10.5 x 9.6"

---

Video of CONTROL 16C/T-BK:

Description:

Two-Way 6.5" Coaxial Ceiling Loudspeaker

Control 16C/T is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.

?Features:

• (2) JBL CONTROL 16C/T-BK 6.5" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar in Black
• Components:
  • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
  • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
• Blind-mount backcan for quick and easy install
• Dual conduit/cable clamps
• Combined 70V/100V and low impedance direct operation
  • 50 Watts at 8O nominal setting
  • 30W multi-tap at 70V/100V
• 62 Hz – 20 kHz bandwidth with wide 110° coverage
• High 91 dB sensitivity for high maximum SPL
• Black (-BK)

Specifications:

• Frequency Range (-10 dB): 62 Hz – 20 kHz
• Power Capacity (at low-Z)
  • 100 Watts Continuous Program Power
  • 50 Watts Continuous Pink Noise
• Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
• Frequency Response (±3 dB): 96 Hz – 15 kHz
• Nominal Sensitivity: 91 dB
• Nominal Coverage Angle: 110° conical coverage
• Directivity Factor (Q): 7.8
• Directivity Index (DI): 8.2 dB
• Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak
• Nominal Impedance: 8 ohms (in direct/bypass 8O setting)
• Crossover Network
  • 12 dB/oct (2nd order) low-pass to LF driver,
  • 12 dB/oct (2nd order) high-pass to HF driver
• LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
• HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
• Input Connector: Removable locking 4-pin connector with screw-down terminals.
  Max wire size 12 AWG (2.5 mm2)
• Connector Wiring: Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
• Strain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanism
• Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated 
  steel backcan
• Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
• Dimensions
  • 253 mm diameter x 225 mm depth from back of baffle
  • (10.0 in diameter x 8.8 in depth)
• Ceiling Cutout Size: Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout
  template included)
• Ceiling Thickness Range: Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses
• Safety Seismic Attachment: One point, top surface
• Net Weight: 3.4 kg (7.4 lbs, one speaker)
• Shipping Weight: 11.2 kg (24.7 lbs, pair in master carton)
• Included Accessories: C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille
• Optional Accessories
  • MTC-26NC new construction bracket
  • MTC-26MR mud-ring construction bracket
  • MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dog-ears for 6 speakers) 
  • MTC-48TR tile rail for 1200 mm (4 ft) tile spans