Package Includes:

• (1) JBL CBT 1000 1500w 2-Way Swivel Wall Mount Line Array Column Speaker in Black
• (1) Audio Technica ATM-DRUM4 Drum Microphone Kit w/(4) Mics Kick/Snare/Overheads

---

Description:

Constant Beamwidth Technology ™ Adjustable Coverage Line Array Column with Asymmetrical Vertical Coverage and Tapered Horizontal Coverage.

Expanding upon our highly successful Constant Beamwidth Technology™ breakthrough, the CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage and a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces.

Features:

• Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent.
• Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and six (6) 165 mm (6-1/2”) high-excursion LF drivers arranged coaxially.
• Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out of coverage lobing.
• Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing.
• Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room.
• Single-speaker room coverage at high SPL, with little over-splash and strong bass response down to below 40 Hz.
• Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
• Swivel (pan)/tilt wall bracket included.

Specifications:

• Drivers: Six (6) 165 mm (6.5 in) LF drivers Twenty-four (24) 25 mm (1 in) HF drivers
• Frequency Range (-10dB): 45 Hz – 20 kHz
• Sensitivity: 102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space); 95 dB (at lowest sensitivity setting: “Medium” pattern up,“Downfill” pattern down, “Music” voicing in free space)
• Impedance: 4 ohms (4 ohms above 1 kHz; 8 ohms below 800 Hz)
• Power Rating: 1500 W (6000 W peak), 2 hrs; 1000 W (4000 W peak), 100 hrs
• Maximum Input Voltage: 65.0 Volts RMS (2 hrs), 130.0 Volts Peak
• Maximum SPL (1m): Highest directivity setting: (“Point” pattern up, “Point” pattern down) with “Speech” voicing: 131 dB continuous average pink noise, 134 dB continuous program, 137 dB Peak
• Vertical Coverage Settings: Coverage is effective (frequency response similar) beyond the traditional -6 dB coverage angles. This is especially useful in compensating for differences in listening distances. Figures show both the -6 dB and -12 dB coverage angles (at 3 kHz). Angles are in reference to cabinet aiming axis. Pattern UP Settings: “Point”: -6dB @ +7°, -12 dB @ +12° “Tight”: -6dB @ +9°, -12 dB @ +15° “Narrow”: -6dB @ +10°, -12 dB @ +20° “Medium”: -6dB @ +13°, -12 dB @ +24° Pattern DOWN Settings: “Point”: -6dB @ -7°, -12 dB @ -12° “Narrow”: -6dB @ -10°, -12 dB @ -20° “Broad”: -6dB @ -17°, -12 dB @ -28° “Downfill”: -6dB @ -20°, -12 dB @ -35°
• Horizontal Coverage: -pending Tapered Horizontal Waveguide continuously variable. Long-throw (top) section: 100° Middle section: 130° Short-throw (bottom) section: 160°
• Recommended High-Pass: 35Hz, 24 dB/oct or greater
• Low Frequency Drivers: 6 pcs, 165 mm (6.5 in) drivers, lightweight neodymium motors, 50 mm (2.0 in) diameter voice coils, copper-capped pole tips to minimize flux modulation and linearize inductance, 16 mm (0.63 in) long coil for high linear drive and high power handling, damped blended textile surround, coated cones for moisture, UV and salt resistance. Magnetically shielded.
• High Frequency Drivers: 24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance.
• Enclosure: Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille
• Outdoor Capability: IP-55 rated, per IEC529, when installed with optional MTC-PC2 cover. ASTM G85 for acid-air/salt-spray (200 hrs.).
• Color: Black (RAL9004) or White (-WH) (RAL9016)
• Insert Points: 14 individual M8 inserts on back panel (20 mm deep) for use with swivel (pan)/tilt bracket(s), forged-shoulder steel eyebolts, swivel rings, and after-market third-party brackets, plus 4 individual M8 inserts on top and 4 on bottom of cabinet end-caps.
• Mounting: Included two-part swivel (pan)/tilt wall bracket provides continuously variable +/- 45 degree left-right swivel aiming (at no up/down tilt – see Bracket Guide for maximum swivel range at various up/down tilt angles), +/- 15 degree tilt in 1 degree fixed increment points. Fourteen (14) threaded mounting points located on back panel of cabinet conform to industry standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for legacy OmniMount® and other compatible third-party brackets. Four (4) threaded mount points on the top end-cap and four (4) on the bottom end-cap. Threaded mounting points can be utilized for suspension. (Always use multiple mounting points.)
• Dimensions: (H x W x D): 1020 mm x 250 mm x 345 mm (40.2 x 9.9 x 13.6 in)
• Net Weight: (cabinet): 24.5 kg (54 lbs)
• Shipping Weight: 38.6 kg (85 lbs)
• Included Accessories: Two-piece swivel (pan)/tilt wall bracket

---

Authorized Audio Technica Dealer!

Description:

The ATM-DRUM4 Drum Pack includes a core selection of four microphones specifically engineered for drum applications. With ATM Series mics for kick, snare and overheads, the ATM-DRUM4 pack has everything you need to professionally mike drums in small clubs, churches and other controlled environments, and for home recording applications.

All four of the microphones in the pack – one ATM250 hypercardioid kick drum mic, one ATM650 hypercardioid snare mic, and two ATM450 cardioid overhead mics – feature low-profile design for minimum visibility and versatile placement options around the drum kit. They are engineered to handle fast transients and high SPLs, and deliver superior off-axis rejection.

Also included in the package are the specified clamps for each microphone, four 5/8"-27 to 3/8"-16 threaded adapters, and a hard carrying case with a die-cut foam interior to hold all microphones and accessories.

Features:

ATM250 Hypercardioid Dynamic Instrument Microphone (1 included)

• Tailored for use on kick drums
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Durable, proven performance for professional applications
• Hi-ENERGY® neodymium magnet for improved output and transient response
• Superior off-axis rejection for maximum gain before feedback
• Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp
• Rugged, all-metal design and construction for years of trouble-free use

ATM650 Hypercardioid Dynamic Instrument Microphone (1 included)

• Tailored for use on snare drums
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Durable performance for professional applications
• Special dual-wall floating construction reduces handling noise and assures consistent performance from mic to mic
• Hi-ENERGY® neodymium magnet for improved output and transient response
• Multi-stage flat grille design is engineered to enable easy placement as close as possible to sound source
• Rugged, all-metal design and construction for years of trouble-free use
• Includes AT8470 Quiet-Flex™ stand clamp

ATM450 Cardioid Condenser Instrument Microphone (2 included)

• Tailored for use on cymbals
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Unique side-address stick design maximizes placement options with minimal obstructions
• Integral 80 Hz HPF switch and 10 dB pad
• Durable performance for professional applications
• Rugged, all-metal design and construction for years of trouble-free use
• Includes AT8471 isolation clamp for shock protection, secure mounting and easy positioning
• Pack includes a hard carrying case with die-cut foam interior

Specifications:

Element:

• ATM250, ATM650: Dynamic
• ATM450: Fixed-charge back plate permanently polarized condenser

Polar Pattern:

• ATM250, ATM650: Hypercardioid
• ATM450: Cardioid

Frequency Response:

• ATM250: 40-15,000 Hz
• ATM650: 80-17,000 Hz
• ATM450: 40-20,000 Hz

Open Circuit Sensitivity:

• ATM250: -54 dB (1.9 mV) re 1V at 1 Pa
• ATM650: -56 dB (1.5 mV) re 1V at 1 Pa
• ATM450: -41 dB (8.9 mV) re 1V at 1 Pa

Impedance:

• ATM250: 600 ohms
• ATM650: 300 ohms
• ATM450: 200 ohms

Weight:

• ATM250: 252 g (8.9 oz)
• ATM650: 279 g (9.8 oz)
• ATM450: 98 g (3.5 oz)

Dimensions

• ATM250: 127.5 mm (5.02") long, 55.0 mm (2.17") diameter
• ATM650: 164.2 mm (6.46") long, 38.8 mm (1.53") diameter
• ATM450: 126.9 mm (5.00") long, 21.0 mm (0.83") diameter

Output Connector:

• Integral 3-pin XLRM-type

Accessories Furnished:

• Three AT8471 isolation stand clamps; AT8470 Quiet-Flex™ stand clamp; four 5/8"-27 to 3/8"-16 threaded adapters; hard carrying case

Audio-Technica Case Style:

• ATM250: R9
• ATM650: T5
• ATM450: S11

---

Advantages of purchasing from an authorized seller:

• Best prices - We sell all Audio Technica Products at wholesale prices
• Full Factory Warranty
• Detailed information of all products
• Lifetime Customer Service by Audio Technica product Experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Audio Technica from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.