- (1) Technical Pro Dual 10" 3000w Powered Bluetooth Speaker w/USB/SD/LED+Wireless Mic
- (1) Technical Pro Dual 10" Passive DJ/Party Speaker w/LED Lights + Titanium Tweeter
- (1) Rockville RCC14-100-2 CL2 Rated 14 AWG 100' CCA Speaker Wire In Wall Ceiling 70V
WHAT'S INCLUDED:
- One active speaker
- One wireless microphone
Description of BS10TOWER:
The BS10TOWER is a high powered all-in-one audio entertainment system. For maximum connectivity, the BS10TOWER supports input from most common sources including 1/8” AUX, RCA, Bluetooth, and even features a built in FM tuner. In addition, the BS10TOWER comes with 1/4” microphone and guitar inputs with separate volume controls so you can use it for live music, announcements and karaoke. All of this wrapped up in a sleek package with eye-catching LED effects.
To help deliver the beats, the BS10TOWER boasts an impressive peak output of 3,000 watts, that makes it ideal for mid to large size venues. For even more sound, the BS10TOWER also comes fitted out with two 10” woofers and Piezo tweeters. Output can be tweaked with the 5-band equalizers that enables you to fine tune the BS10TOWER to match any venue or playback.
Features:
- Technical Pro Dual 10" 3000w Powered Bluetooth Speaker w/USB/SD/LED+Wireless Mic
- Bass and treble controls for fine tuned audio
- 5-Band equalizer that adjusts output over key ranges
- LED display that provides key information about current songs
- Side carry handles
- Repeat & shuffle modes on USB and SD inputs
- LED effects lights
Specifications:
- Dimensions (inch): 12.4" L x 9.4" W x 33.4" H
- Weight: 37.0 lbs
- Peak Power: 3,000 Watts
- Woofer: 2 x 10" LED with 1.375" Voice Coil and 30 oz. Magnet
- Tweeter: 2 x Piezo
- Inputs: Bluetooth • 1/8" AUX • SD Card • USB Flash Drive • FM • RCA (2)
- Mic Inputs: 1/4" with separate echo & volume controls
- Guitar Inputs: 1/4" with separate volume control
- Outputs: Bare Wire (Powered)
- Bluetooth: v3.0 with EDR technology • 30 foot range
- USB/SD Support: Plays .mp3, .wma. & .wav (64 GB max)
- Frequency Response: 20Hz - 20KHz
- Sensitivity: 90 ±2dB
- Impedance: 4 ohms
- Voltage: 110/220v
Features of BS10PASSIVE:
- 3000 watts peak power
- Bare Wire Inputs
- LED Input RCA
- Woofers: (2) 10'' LED woofers, 1.375" voice coil, 30 oz. magnet
- LED On & Off settings
- Tweeters: Two Harmonic LED 1" voice coil, 10 oz. magnet titanium driver
- Frequency Response: 20Hz-20KHz
- Sensitivity: 90 +/-2dB
- Impedance: 4 ohm
- 2 Integral carry handles
All About Your RCC14 Series of Speaker Wire:
How To Set Up Your RCC14 Speaker Wire:
Description:
CL2 rated speaker wire is perfect for commercial or home applications. CL2 means you can safely install it in your ceiling or behind walls. If you are doing a 70V or 100V or 8 ohm installation of wire then this is the perfect product for you.
This speaker wire is CCA (copper clad aluminum). Our CCA will run well because we use 30 % copper and 70 % aluminum. There are other CCA cables on the market that use 10 % or less of copper. OFC cables are better but they cost way more and in many applications there will be no performance difference. You should use OFC cables for long runs or if a lot of power will be running through it.
Each conductor is housed in a color-coded PVC for easy polarity identification. The entire cable is inside of a PVC material that is CL2 fire-safety rated.
Features:
- Rockville RCC14-100-2 CL2 Rated CCA (Copper Clad Aluminum) Speaker Wire For In Ceiling or In-Wall Installation
- 100 Feet
- 14 AWG (American Wire Gauge)
- 2 Conductor
- 30% Copper and 70 % Aluminum wire
- CL2 rated for safe installations in ceilings or walls
- Strands Count: 41 Wires Strand Size: 0.25mm
- Each conductor is housed in a color-coded PVC for easy polarity identification
- UPC:
- 613817172381
