- (1) Boss BPS4B ATV/UTV/Marine 500W 4 Channel Amplifier with Bluetooth Controller
- (1) Pair of Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles
How to install an amplifier in your UTV:
Description of BPS4B:
4 Ohm Stable
The lowest impedance accepted by this amplifier is 4 ohms, which makes it ideal for powering full range speakers in your vehicle, as most automotive speakers are 4 ohms impedance.
Audio Streaming
Audio streaming [A2DP] is an audio protocol of Bluetooth technology. This profile allows for audio to be streamed wirelessly from your compatible device, such as a Smartphone, to the source unit so you can enjoy your favorite music or streaming music service such as Pandora or Spotify, wirelessly.
Aux Input
The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or Smartphone so you can enjoy your music through your system.
Class A/B
Class A/B amplifiers have long been known for their ability to produce great quality sound while performing more efficiently than pure Class A amplifiers. We have developed a specific linear circuitry that further reduces distortion while increasing both sound quality and power output.
Multi-Function Remote Control
In-line Remote Control that can be installed in a convenient, safe place to allow you to control the volume, track and other functions of your system while riding.
Protection
If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.
USB Charging
Built-in 1A charger allows you to charge your USB connected device thru this units USB port.
Features:
- Channel Configuration: 4 Channel
- Amp Topology: Full Range, Class A/B
- Total Power Output: 500 Watts
- Peak Power @ 4 ?: 125 Watts X 4
- RMS Power @ 4 ?: 94 Watts X 4
- Speaker Impedance: 4 To 8 ?
- T.H.D. (Total Harmonic Distortion): 0.01 %
- Channel Separation =: 103 dB
- S/N Ratio (A-Weighted): 90 dB
- Frequency Response: 20 Hz To 20 Khz ±1 dB
- RCA Inputs: 2 Channel
- Pre AMP Outputs: 2 Channel
- Thermal/Overload/Short Protection: Yes
- Bluetooth Audio A2DP Wireless Audio Streaming - play music and apps like Spotify/Pandora wirelessly
- 4-channel Micro Amplifier, Aux Inputs, RCA Pre-amp Outputs
- USB Charging, Inline Multi-Function Remote
- RCA pre-amp output to daisy chain multiple amps
- Included RED / BLUE-backlit UV / weather resistant silicon button controller
- Includes Multi-mount controller system: Includes flush mount bezel and stainless steel handle bar clamp
- Compatible with optional MC900SMC surface mount Y controller kit
- Compatible with MUSB35 USB /3.5mm extension kit
- Weatherproof
- Dimensions: 7.5" x 5.2" x 1.7"
All About RKL65MBW:
How To Install Kick Panel Speaker Pods In A UTV:
Includes:
- Pair of 6.5" Marine LED Speakers
- 16.4 feet of Speaker Wire
- Stainless Steel Mounting Screws
- Black and White Grills Included
Features:
- Pair Rockville RKL65MBW 6.5" 2-Way 700 Watt Marine Boat Speakers with LED Lights
- CEA Compliant Power Ratings
- True Coax Design With the Tweeter Completely Separated From the Cone
- Larger Cone Surface Area Gives Better Mids and Lows
- Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
- True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
- Power Rating: 350 Watts Peak/85 Watts RMS Per Speaker
- Total Power: 700 Watts
- Beat sync LED's flash to the rhythm of the music
- You can select either red or blue color LED's on the wire harness
- No extra installation for the LED. It gets a power signal through your speaker wire
- The louder the music the more intense the LED's flash
- Black and White detachable Grills
- Fully Marinized Against Salt & Fresh Water Conditions
- UV treated cone makes this completely Waterproof and rustproof
- Anti-corrosion Stainless Steel Terminals
- Molded ABS plastic for amazing sound and protection from the elements while out on the water
- Polypropylene Formed Cone
- 10 Oz Y30 top of the line magnet supports high power handling
- Rubber Surround
- High quality ferrite magnet
- 1" inch Polymer Tweeter
- Oversized 1" CCAW Kapton Voice Coil
- Pre-installed Stainless-Steel mounting screws included
- Perfect for Marine, Car, ATV and UTV applications
- Impedance: 4-Ohm
- Frequency Response: 35Hz - 20KHz
- Sound Pressure Level: 90dB @ 1w/1m
- Total Diameter: 7.3"
- Cutout Diameter: 5.6"
- Total Height: 3.86"
- Mounting Depth: 2.56"
- UPC:
- 613816440788