- (1) Rockville BluTube 70w Tube Amplifier/Home Theater Stereo Receiver w/ Bluetooth
- (1) Pair of Rockville RockShelf 54C 360w Wood 5.25" Home Theater Bookshelf Speakers/4 Ohm
- (1) Rockville RCC14-100-2 CL2 Rated 14 AWG 100' CCA Speaker Wire In Wall Ceiling 70V
- (1) Pair of Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
How to Set Up Your BLUTUBE:
Video of BluTube:
Includes:
- Tube Amplifier / Receiver
- 5 Foot RCA to 3.5MM cable
- 5.5 Foot Power cable
- Owners manual / Warranty card
Features:
- Rockville BluTube Audiophile grade tube amplifier with bluetooth
- 25 watts x 2 RMS @ 8 ohm
- 35 watts x 2 RMS @ 4 ohm
- Tube amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!
- Built in Bluetooth with 33 foot range
- Built-in Preamplifier
- (2) sets of RCA inputs to connect to any audio device like a TV, Laptop, or MP3 player, etc
- Headphone output
- VU meter
- Adjustable bass and treble (2 band equalizer)
- USB input for music files from USB thumb drive
- USB can charge your phone or other USB device
- Rear Speaker Terminals: Banana plug / binding post outputs for 2 speakers
- Frequency Response (±3dB): 25Hz-20kHz
- Input Impedance: 47kO
- Input Sensitivity: 300mV
- Output Impendence: 4-8ohm
- Total Harmonic Distortion(THD): =0.02%
- Signal-to-Noise Ratio(S/N): =86dB
- Bluetooth: 2.1+EDR
- USB : Supports WAV/MP3/WMA/APE/FLAC
- 110V power supply
- Unit weight: 6.6 lbs
- Unit dimension: 10.6"x10.2"x5.1"
Video of ROCKSHELF 5.25” Version 2:
Features:
- Pair Rockville RockShelf 54C V2 Wood 5.25" Home Bookshelf Speakers/4 Ohm
- RMS Power: 45 Watts Each / 90 Watts per pair
- Peak Power: 180 Watts Each / 360 Watts per pair
- Woofer: 5.25”
- Tweeter: 1” Silk dome tweeter
- Cabinet material: Top quality MDF with beautiful wood grain finish
- Audiophile-grade black woofer cone for excellent mid and low frequency response
- Silk dome tweeter gives crisp and realistic sounding highs that you can’t get with any other kind of tweeter
- Gold-plated 5-way binding post terminals can accept banana, bare wire, spade terminals, and more
- Wall mount hanging bracket
- Impedance: 4 ohm
- Color: Wood
- Ultra-stiff Polypropylene dustcap on woofer
- Frequency Response: 85Hz-20KHz
- 12dB/octave crossover built into the speaker
- Sensitivity:85 dB 1W/1m
- Rubber surrounds on woofer
The Rockville RHTSB high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!
Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands.
With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on.
In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.
Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence!
Includes:
- 8 Isolation pads
- 8 Brass spikes
- 8 Rubber spikes
- 4 Cable clips
- 4 Cable ties
- 16 Screws
Features:
- (2) Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
- Pair Rockville RHTSB high performance wood speaker stands
- (2) Pairs of Top Platforms for different size speakers
- Finished with premium furniture-grade paint that will not crack, chip, or peel.
- Made from high quality medium density fiber core to minimize resonance
- Brass & Rubber spikes add stability to any floor surface
- Isolation pads create a no-slip surface as well as improve acoustical performance
- Empty body design allows you to add sand in order to increase the weight of the stands if needed
- 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
Specifications:
- Stands Height: 36"
- Base plate size: 11.8" 9.25"
- Top Platform size 1: 9.25" 7.28" (For smaller size speakers)
- Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8")
- Item Load weight capacity: 60 lbs.
- Item weight per pair 25 lbs.
- Shipping weight 29 lbs.
- Color: Black
- Shipping dimensions 36” x 11.4” x 9.25”
- Product dimension 11.8” x 9.25” x 36”
All About Your RCC14 Series of Speaker Wire:
How To Set Up Your RCC14 Speaker Wire:
Description:
CL2 rated speaker wire is perfect for commercial or home applications. CL2 means you can safely install it in your ceiling or behind walls. If you are doing a 70V or 100V or 8 ohm installation of wire then this is the perfect product for you.
This speaker wire is CCA (copper clad aluminum). Our CCA will run well because we use 30 % copper and 70 % aluminum. There are other CCA cables on the market that use 10 % or less of copper. OFC cables are better but they cost way more and in many applications there will be no performance difference. You should use OFC cables for long runs or if a lot of power will be running through it.
Each conductor is housed in a color-coded PVC for easy polarity identification. The entire cable is inside of a PVC material that is CL2 fire-safety rated.
Features:
- Rockville RCC14-100-2 CL2 Rated CCA (Copper Clad Aluminum) Speaker Wire For In Ceiling or In-Wall Installation
- 100 Feet
- 14 AWG (American Wire Gauge)
- 2 Conductor
- 30% Copper and 70 % Aluminum wire
- CL2 rated for safe installations in ceilings or walls
- Strands Count: 41 Wires Strand Size: 0.25mm
- Each conductor is housed in a color-coded PVC for easy polarity identification
- UPC:
- 613816423262
