- (1) Blue Blueberry Condenser Studio Recording Microphone Mic w/ Shockmount+Case
- (1) Rockville DPM10B 10" 400w Powered Active 3-Way Studio Monitor Speaker Full Range
Authorized Blue Dealer!
Description:
Blueberry is a pressure-gradient cardioid condenser microphone that allows your voice and instruments to sit in front of the mix. Its handcrafted capsule and custom components provide shimmering high-end and smooth midrange with a commanding intimate presence that’s ideal for anything from vocals and acoustic guitar to strings and brass.
Out In Front
Blueberry helps your vocals sit prominently at the front of your mix, without
getting lost in the maxed-out gain structure of modern recordings. It combines
the commanding intimate presence found in prized vintage vocal mics with the
shimmering highs and smooth midrange you need to compete with modern mixes. No
need to compromise your vocal track with lots of EQ plug-ins.
Signature Sound for Every
Instrument
Blueberry’s commanding sonic signature and high SPL handling make it ideal for
all sorts of instruments. Capture guitar amps, drums, and brass with precision
and clarity. Achieve warm, transparent tone for acoustic guitars and strings.
Blueberry’s natural intimate presence even lets your most delicate sounds cut
through the mix. All with minimized proximity effect.
Grown In the USA
Blueberry is designed and assembled with hand-tuned precision right here in the
USA. Everything from the single-membrane large diaphragm capsule to the
custom-built brass back plate adds to Blueberry’s superior audio and superb
transient response.
Vintage Meets Modern
Blueberry blends the intimacy of vintage tube vocal microphones with the
response of the best solid-state technology. These characteristics combined with
a proprietary transformer output provide Blueberry with a signature sound all
its own. It’s the ultimate blend of vintage and modern.
Blue Heritage
Every microphone we make delivers a unique personality, detailed sonic signature
and specialized feature set to inspire your creativity. Blueberry is also
custom-designed, hand-tuned, and tested to the highest quality standards, so
you’ll always get the best performance. And at an affordable price, superior
sound is within easy reach.
Suggested Applications
In studio and on stage for vocals, acoustic guitars, drums, and any instrument
that needs to cut through the mix.
Features:
- Blue Blueberry Condenser Studio Recording Microphone with Shock Mount and Case
- Frequency Response: 20Hz – 20 kHz
- Sensitivity: 20.0 mV/Pa at 1kHz
- Output Impedance: 150 Ohms
- Rate Load Impedance: Not less than 1k Ohms
- Maximum SPL: 140dB SPL
- S/N Ratio: 86dB
- Noise Level: 9.0 dB
- Dynamic Range: 131dB
- Power Requirement: +48V DC Phantom Power
- Transducer Type: Condenser, Pressure Gradient
- Polar Patterns: Cardioid
- Proprietary Blue single-membrane large diaphragm capsule
- Commanding, intimate presence for vocals and instruments
- Fast transient response and high-SPL handling
- Blue heritage of premium audio and innovative design
- Accessories Included: Protective Wooden Box, S2 Shock
- Product Dimensions: 9.25" x 1.97" x 1.18" inches
- Product Weight: 1.15 Lbs.
How to Set Up your DPM Series Speakers:
Video of DPM10B:
Authorized Rockville Dealer!
The DPM10B by Rockville is one of the only 10” studio monitors on the market. There is only one other that we have seen. We strongly feel out of the few on the market that ours is the best sounding and best quality.
They have a flat frequency curve making these the perfect studio monitors, but many customers also use these in their home or as stage monitors. These are just about the cleanest sounding speakers you can find. The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer.
To get the most efficiency we use a tri-amp class “AB” amplifier. There are 3 separate amps built into this speaker. One for the lows, one for the mids, and one for the highs. We also added a 3-way crossover that makes sure each component is playing the proper frequencies so that you get the cleanest sound. This is a true 3-way speaker design. We use the best quality components from the amp circuit, to the tweeter, to the woofer, to the enclosure. For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound phenomenal! For mids we use a 4” glass Aramid composite midrange. The voice and mids on this speaker are what makes this cleaner than anything else I have ever listened to. The 10” glass Aramid composite woofer gives you some serious bass! What I love about the bass is that you do not get any rumbling effect. It is just clean and musical. The rubber surrounds increase sound quality and eliminate unwanted distortion. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed these speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!
Features:
- Rockville DPM10B 10" 3-Way 400W Active/Powered Studio Monitor Speaker in Black (sold individually)
- Peak Power: 400 Watt
- RMS Power: 200 Watt
- True 3-way design With Tri-Amped: 40 Watts for highs, 40 Watts for Mids, and 120 watts for the lows. This speaker has 3 amps built in. It has a separate amp for the lows, mids, and highs. This technology creates the most crisp and clear sound imaginable
- 3-Way Crossover system – Our 3 way crossover built-in is tuned to make sure each speaker plays the proper frequencies. We filter out unwanted sounds from each speaker, and create a flattened frequency curve for the ultimate true sound reproduction
- Midfield monitor with the optimal operating distance of 3 feet to -14 feet
- The front-firing port is built to the perfect spec to enhance the sound and keep a very flat frequency curve
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Enclosure is made of top quality high-grade MDF wood. The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
- Tweeter Waveguide design optimizes directivity and phase response providing amazing detail and imaging
- Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter. Our tweeter produces the softest most realistic highs on the market that will not hurt your ears. They are loud, clear, and musical
- Tweeter has 1” voice coil diameter
- 10” Glass Aramid Composite Woofer cone for excellent transient response and accurate low and mid sound reproduction
- 4” Glass Aramid Composite Midrange for extremely accurate midrange and vocal sound reproduction
- Volume Control: System gain range from -30 dB to +6 dB,
- High Frequency adjusts -2dB, -1dB, 0, +1dB
- Balanced XLR and ¼” TRS line inputs and unbalanced RCA inputs
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- Thermal and Overload / Clip Protection protects the speaker from getting damaged
- Rubber woofer surrounds increase sound quality and eliminate unwanted distortion
- Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
- Round edges and trimmed front wooden front board give you a modern beautiful looking speaker
- Front panel built with black real anodizing aluminum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). The glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
- Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant.
- World class top of the line audiophile grade components! We use 3 Amplifier IC’s made by a famous manufacturer called ST. The model is TDA7294. These are known to be best- in-class circuit designs. There are 3 of them since we have 3 amps in the speaker (one for lows, one for mids, one for highs)
- 110/220 Volt compatible
- Every speaker in production undergoes a computer generated sound check test to ensure it upholds to our specifications and standards
- We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
Specifications:
- Certification: CE and RoHS Compliant
- Amplifier: Class AB, tri-amped
- Max SPL: 113dB at 1w/1m
- THD: 0.10%
- Frequency Response: 31Hz - 20kHz
- Peak output: 400 Watts
- RMS output: 200 Watt
- Input voltage: 120V
- Components: 1.5" neodymium silk dome tweeter, 4” Midrange and 10" woofer with rubber surrounds and glass aramid fiber cone
- Includes power cord, user manual, warranty, and speaker
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
- Product Dimensions in Inches (Single): (W*H*D) 12.8” x 21. 5'' x 14.4''
- Shipping Dimensions in Inches: (W*H*D) 16.3 x 25'' x 17.9''
- Net Weight: 39.7 LBS
- Shipping Weight: 44.5 LBS
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
- UPC:
- 613815776376
