- (1) Rockville BLUAMP 150 Home Stereo Bluetooth Amplifier Receiver Optical/Phono/RCA
- (1) Rockville RCC14-100-2 CL2 Rated 14 AWG 100' CCA Speaker Wire In Wall Ceiling 70V
- (1) Rockville Rock Shaker 8" Inch Black 400w Powered Home Theater Subwoofer Sub
- (1) Rockville RCDR25B 25' Ft. Dual RCA to Dual RCA Pro Audio Cable 100% Copper
- (1) Pair of Rockville RockShelf 54B 360w Black 5.25" Home Theater Bookshelf Speakers/4 Ohm
How to Set up the BluAmp Series Amplifiers:
What's in the Box:
- Bluetooth Stereo Amplifier
- Remote Control
- Owners manual / Warranty card
Description:
The BluAmp 150 by Rockville is a high quality Bluetooth amplifier that has 75 watts x 2 RMS and a lot of playback options including Bluetooth, RCA, Phono, Optical, and Mic inputs.
Huge Power
The BluAmp 150 has 75 x 2 watts RMS @ 4 ohms which is an incredible amount of power for an amp of this size. Big power is great when you want to have crystal clear sound even at high volume levels. At 95% volume this amp still delivers clean power with no clipping.
So many playback and expandability options!
For playback it has built in Bluetooth, USB, and SD options. The Bluetooth 5.0 chipset has long range and works perfectly. The input section has RCA aux, Optical, and phono. Whether you want to connect your MP3 player, television, computer, or even your turntable we got you covered!
We also have 1 set of RCA outputs allowing you to add more amplifiers, powered subs, or powered speakers to the system!
Karaoke!
There are 2 mic inputs along with echo control, and mic volume controls which makes this perfect for karaoke parties.
Full Function Remote
The remote control that is included will allow you to access all functions of the receiver quickly and efficiently.
Adjustable Equalizer Settings
The adjustable bass and treble controls will allow you to fine tune your music to your taste.
Features:
- Rockville BLUAMP-150 2-Channel Home Stereo Bluetooth Amplifier
- 4 Ohms: 75 x 2 watts RMS and 300 x 2 watts peak
- 8 Ohms: 40 x 2 watts RMS and 160 x 2 watts peak
- Plays Bluetooth/USB/SD
- RCA aux input
- Phono RCA input for turntables
- Optical input
- (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control
- (1) set of RCA Audio Outputs to connect to a subwoofer or another amplifier
- Built in Bluetooth 5.0 with 33 foot range
- 2 sets of binding post speaker output terminals
- Bass/Treble/Balance/Mic Volume/Mic Echo and Master Volume controls
- Built-in Cooling Fan
- Built-in Pre-Amplifier with low distortion
- Class D circuit with great sound quality
- Solid metal construction with brushed aluminum front panel
- Multi function volume knob
- LCD Display / Touch Buttons
- Frequency Response (±3dB): 50 Hz- 20 KHz
- AUX Input Impedance: 10k Ohms
- AUX Input Sensitivity: 300mV
- Phono input impedance: 47K
- Phono input sensitivity: 20mV
- Output Impedance: 4-8 ohm
- Total Harmonic Distortion(THD): =0.5%
- Signal-to-Noise Ratio(S/N): =78dBA
- USB: Supports WAV/MP3/WMA
- 110-220V
All About Your RCC14 Series of Speaker Wire:
How To Set Up Your RCC14 Speaker Wire:
Description:
CL2 rated speaker wire is perfect for commercial or home applications. CL2 means you can safely install it in your ceiling or behind walls. If you are doing a 70V or 100V or 8 ohm installation of wire then this is the perfect product for you.
This speaker wire is CCA (copper clad aluminum). Our CCA will run well because we use 30 % copper and 70 % aluminum. There are other CCA cables on the market that use 10 % or less of copper. OFC cables are better but they cost way more and in many applications there will be no performance difference. You should use OFC cables for long runs or if a lot of power will be running through it.
Each conductor is housed in a color-coded PVC for easy polarity identification. The entire cable is inside of a PVC material that is CL2 fire-safety rated.
Features:
- Rockville RCC14-100-2 CL2 Rated CCA (Copper Clad Aluminum) Speaker Wire For In Ceiling or In-Wall Installation
- 100 Feet
- 14 AWG (American Wire Gauge)
- 2 Conductor
- 30% Copper and 70 % Aluminum wire
- CL2 rated for safe installations in ceilings or walls
- Strands Count: 41 Wires Strand Size: 0.25mm
- Each conductor is housed in a color-coded PVC for easy polarity identification
How to Set Up Your Rock Shaker Subwoofer:
Video of ROCK SHAKER 8:
Description:
The Rock Shaker 8 is an all in one powered 8” subwoofer perfect for any home theater system or studio application.
This product uses high grade components from the ground up and delivers clean sound with tight and thumpy bass you can really feel.
The enclosure is made of high quality MDF which delivers superb sound. We use a highly efficient class “D” amplifier that is engineered to be perfectly matched with the woofer and enclosure. We tested the rear firing port and determined it delivers the best bass response where you get optimal reflection that will disburse the sound throughout the room.
The woofer is top quality with foam surrounds and features a Y30 grade magnet, and a 4-layer voice coil.
Our subwoofer has RCA inputs and outputs as well as high level speaker inputs and outputs to support any setup.
Features:
- Rockville Rock Shaker 8 Black 400 Watt Powered 8" Home Theater Subwoofer
- 400 Watts Peak / 200 Watts RMS
- Built-in Class D Amplifier
- Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board)
- High-grade vinyl enclosure covering with a beautiful finish
- The enclosure is built with the perfect air space to maximize sound quality and punch
- The rear firing port is engineered for optimal sound
- Class “D” Amplifier Circuitry with Auto-Switching Power Supply
- High-grade woofer with foam surround and paper cone
- Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Enclosure is filled with fire resistant poly cotton
- Detachable foam grill
Inputs / Outputs / Controls:
- RCA line input
- RCA line output
- Speaker High level inputs
- Speaker High level outputs
- Volume control
- Phase switch (0°-180°)
- Crossover Frequency control
- Power switch
- Standard IEC power cable included
Specifications:
- Amplifier: Class D
- Woofer Impedance: 4 Ohm
- Signal to noise ratio: 85 dB (Maximum output with THD+N <1%, A-weighted)
- THD: <1%
- INPUT sensitivity: 88dB +/- 2dB
- Frequency Response: 20 Hz - 200 Hz
- 400 Watts peak output
- 200 Watts RMS output
- Voltage: 110-240V
- Product Dimensions in Inches: (W*H*D): 11.8'' x 13.8" x 15''
- Shipping Dimensions in Inches: (W*H*D): 14.6" x 18.3'' x 18.9''
- Unit Weight: 18 LBS
- Shipping Weight: 22 LBS
- Color: Black
Video of RCDR25B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCDR25B 25' Ft. Dual RCA to Dual RCA Pro Audio Cable 100% Copper
- Dual RCA to Dual RCA
- Nickel-Plated for Rugged Durability and Efficient Signal Transfer
- 100% Copper Conductors for Enhanced Signal Clarity
- OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
- Length: 25 Ft
- Color: Black
Video of ROCKSHELF 5.25” Version 2:
Video of Rockshelf Series of Speakers:
Description:
Features:
- Pair Rockville RockShelf 54B V2 Black 5.25" Home Bookshelf Speakers/4 Ohm/Kevlar
- RMS Power: 45 Watts Each / 90 Watts per pair
- Peak Power: 180 Watts Each / 360 Watts per pair
- Woofer: 5.25” Kevlar cone
- Tweeter: 1” Silk dome tweeter
- Cabinet material: Top quality MDF with beautiful wood grain finish
- Audiophile-grade black kevlar woofer cone for excellent mid and low frequency response
- Silk dome tweeter gives crisp and realistic sounding highs that you can’t get with any other kind of tweeter
- (2) Detachable magnetic grills in white and grey
- Gold-plated 5-way binding post terminals can accept banana, bare wire, spade terminals, and more
- Wall mount hanging bracket
- Impedance: 4 ohm
- Color: Black
- Ultra-stiff Polypropylene dustcap on woofer
- Rubber surrounds on woofer
- Frequency Response ±3db:75Hz-20KHz
- Sensitivity:86 dB 1W/1m
- 1” Aluminum Voice Coils
- High Quality Golden Terminals
- Dimensions of each speaker (inches): 10.47"H x 6.18"W x 5.75"D
- One pair speakers Shipping carton dimensions (inches): 14.96” L x 8.94” W x 12.9” H
- Weight per speaker: 4.43lbs
- Shipping weight: 10.6lbs
- UPC:
- 613817044251
