Package Includes:

• (1) Rockville BLUAMP 100 Home Stereo Bluetooth Amplifier with USB/Mic Input+RCA Out
• (1) Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display

---

BLUAMP SERIES PRODUCT VIDEO:

How to Set up the BluAmp Series Amplifiers:

What's in the Box:

• Bluetooth Stereo Amplifier
• Remote Control
• Owners manual
• Warranty card

Description:

The BluAmp 100 by Rockville is a high quality Bluetooth amplifier that has a ton of power and all the inputs and outputs you need for almost any setup.

Huge Power
The BLUAMP 100 is loaded with 500 Watts of peak power and 120 watts continuous RMS! The built in amplifier is loud enough that when you crank up the volume your neighbors just might complain!

Expandable
This is more than an amplifier. The BLUAMP 100 will be the control center for your home stereo system, or your karaoke system.

There are 2 RCA outputs allowing you to connect powered subwoofer(s) or additional power amplifiers. The RCA input allows you to connect and play back any audio device. You also will get USB playback, SD playback and an FM radio.

Great For Karaoke
There are 2 mic inputs along with echo control, and mic volume controls which makes this perfect for karaoke parties.

Full Function Remote
The remote control that is included will allow you to access all functions of the receiver quickly and efficiently.

Adjustable Equalizer Settings
The adjustable bass and treble controls will allow you to fine tune your music to your taste.

Features:

• Rockville BLUAMP 100 Home Stereo Bluetooth Amplifier
• Plays Bluetooth USB/SD/FM/Aux
• 2 Mic inputs with echo for karaoke
• 2-Channels (Left/Right)
• 4 Ohms: 60 x 2 watts RMS and 250 x 2 watts peak
• 8 Ohms: 45 x 2 watts RMS and 175 x 2 watts peak
• Class A/B circuit with great sound quality
• RCA aux inputs to connect to any audio device
• (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control
• (2) sets of RCA Audio Outputs to connect to a subwoofer or another amplifier
• Built in Bluetooth with 33 foot range
• 2 sets of binding post speaker output terminals
• Bass/Treble/Mic and Master Volume controls
• FM Radio with Antenna
• Built-in Cooling Fan
• Built-in Pre-Amplifier with low distortion
• Rear Speaker Terminals: binding post outputs for 2 speakers
• LCD Display
• Frequency Response (±3dB): 50 Hz- 20 KHz
• Input Impedance: 10kO
• Input Sensitivity: 300mV
• Output Impedance: 4-8ohm
• Total Harmonic Distortion(THD): ≤0.5%
• Signal-to-Noise Ratio(S/N): ≥78dBA
• Bluetooth Version: 5.0
• USB : Supports WAV/MP3/WMA
• 115V/230V switchable
• Unit weight: 6.6LBS
• Unit dimensions: 10.2" x 7.8" x3.2"

---

HOW TO SET UP YOUR RWM1203VH:

Video of RWM1203VH:

Includes:

• 2 wireless handheld microphones
• 1 receiver unit
• User manual
• Batteries
• Transfer Cable

Features:

• Rockville RWM1203VH VHF Dual Channel Handheld Wireless Microphone System
• Large display on receiver + digital display on each mic
• Each mic is large and solid with a nice weighted feel
• Improved high performance wireless handheld microphone capsule
• Includes transmitter with two handheld, high sensitivity, unidirectional, wireless cardioid microphones
• Featuring a dual filter design to limit feedback and interference
• Ultra signal stability eliminates unwanted distortion
• Transmitter automatically links to receiver for ease of use
• Use two handheld mics at once
• Individual microphone volume controls
• Low power consumption for longer battery life
• System comes in 4 different frequency options. You can request a specific one in the notes
A. 255.1/227.1 MHZ
B. 224.9/256.9 MHZ
C. 228.9/253.4 MHZ
D. 230.8/255.8 MHZ

Specifications:

System:

• Operating Range: 150 feet or more
• Channel: Two Channel
• Frequency Range: 210MHz - 270MHz
• Frequency Response: 40Hz-18KHz
• S/N.:>103dB (1KHz-A)
• Operating Temp: 14°F – 122°F
• Oscillation Mode: Quartz Crystal
• Frequency Stability: ±0.005%
• Modulation Mode: VHF
• Harmonic Radiation :< 63dBm
• RF Output Power: 10mW
• Power Voltage: AC110V- 60Hz
• Mic Battery: AA x 2

Receiver:

• Sensitivity: (S/N=30dB) >2mV
• Audio Output Impedance: 600O
• Audio Output Level.: 0-0.5V
• Power Supply: AC110V 60Hz
• Current Consumption: =50mA
• Audio Out Connector: 1/4" unbalanced

Transmitter:

• Frequency Stability: ±0.005%
• RF Output Power: =10mW
• Modulation Mode: VHF
• Maximum Deviation Range: ±50KHz
• Microphone Mode: Fixed
• Power Supply: AA/1.5V×2
• Current Consumption: =35mA

Owner’s Manual