- (1) Rockville BLUAMP 100 Home Stereo Bluetooth Amplifier with USB/Mic Input+RCA Out
- (4) Rockville D4-8 Black Dual 4" 8 Ohm Wall Mount Swivel Home Theater Speaker
BLUAMP SERIES PRODUCT VIDEO:
How to Set up the BluAmp Series Amplifiers:
What's in the Box:
- Bluetooth Stereo Amplifier
- Remote Control
- Owners manual
- Warranty card
Description:
The BluAmp 100 by Rockville is a high quality Bluetooth amplifier that has a ton of power and all the inputs and outputs you need for almost any setup.
Huge Power
The BLUAMP 100 is loaded with 500 Watts of peak power and 120 watts continuous RMS! The built in amplifier is loud enough that when you crank up the volume your neighbors just might complain!
Expandable
This is more than an amplifier. The BLUAMP 100 will be the control center for your home stereo system, or your karaoke system.
There are 2 RCA outputs allowing you to connect powered subwoofer(s) or additional power amplifiers. The RCA input allows you to connect and play back any audio device. You also will get USB playback, SD playback and an FM radio.
Great For Karaoke
There are 2 mic inputs along with echo control, and mic volume controls which makes this perfect for karaoke parties.
Full Function Remote
The remote control that is included will allow you to access all functions of the receiver quickly and efficiently.
Adjustable Equalizer Settings
The adjustable bass and treble controls will allow you to fine tune your music to your taste.
Features:
- Rockville BLUAMP 100 Home Stereo Bluetooth Amplifier
- Plays Bluetooth USB/SD/FM/Aux
- 2 Mic inputs with echo for karaoke
- 2-Channels (Left/Right)
- 4 Ohms: 60 x 2 watts RMS and 250 x 2 watts peak
- 8 Ohms: 45 x 2 watts RMS and 175 x 2 watts peak
- Class A/B circuit with great sound quality
- RCA aux inputs to connect to any audio device
- (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control
- (2) sets of RCA Audio Outputs to connect to a subwoofer or another amplifier
- Built in Bluetooth with 33 foot range
- 2 sets of binding post speaker output terminals
- Bass/Treble/Mic and Master Volume controls
- FM Radio with Antenna
- Built-in Cooling Fan
- Built-in Pre-Amplifier with low distortion
- Rear Speaker Terminals: binding post outputs for 2 speakers
- LCD Display
- Frequency Response (±3dB): 50 Hz- 20 KHz
- Input Impedance: 10kO
- Input Sensitivity: 300mV
- Output Impedance: 4-8ohm
- Total Harmonic Distortion(THD): ≤0.5%
- Signal-to-Noise Ratio(S/N): ≥78dBA
- Bluetooth Version: 5.0
- USB : Supports WAV/MP3/WMA
- 115V/230V switchable
- Unit weight: 6.6LBS
- Unit dimensions: 10.2" x 7.8" x3.2"
How To Mount Your D4 Speaker To The Wall (step by step):
Description:
The D4-8 is a dual 4” speaker that is perfect for home audio systems, restaurants, patios, conference rooms, and much more. The dual speaker design disperses the sound wider so you can evenly spread the sound in any room.
The final impedance of this speaker is 8 ohms allowing you to connect 1 or 2 of them per channel to your amplifier or receiver. Each speaker can handle 50 watts RMS and 200 watts peak.
Our 4 way swivel bracket allows you to angle the speaker up, down, left and right for optimal sound staging.The sound these speakers produce are both rich and full. They include large 9.75 oz magnets and the tweeter is an audiophile grade silk soft dome tweeter. We also have a built in 2nd order 2500Hz fixed crossover that protects the speaker and creates a great sound curve for indoor or outdoor applications. The detachable euro-block terminals make installation quick and easy. The terminals work with ordinary speaker wire.
Power Handling:
- 50 Watts RMS each speaker
- 200 Watts Peak
Features:
- Rockville D4-8 Black Dual 4" wall mount speaker for home use, patio installs, and commercial applications
- Weather resistant with rugged ABS cabinet is perfect for outdoor patio or indoor use
- Curved cabinet design for better sound coverage with an 80x120 degree dispersion
- Dual swivel mounting bracket supports vertical 90 degree swivel and horizontal 100 degrees swivel
- Polypropylene Cone
- Rubber Surround
- (2) 4” Woofers
- 1” Kapton Voice Coil
- 1” Soft Silk Dome Tweeter
- 9.75 oz. Ferrite Magnets
- Detachable Euro-Block Terminals with quick disconnect (uses regular speaker wire but its quicker)
- Built in 12dB/Octave crossover with dynamic speaker protector
- Crossover details: 2nd order / 2500Hz rolloff
- 8 Ohm impedance
- Frequency Response: 55Hz – 20KHz
- Sensitivity: 88dB @ 1w / 1m
- Weight: 6.4 Lbs each
- Dimensions: 12.05” x 6.6” x 8.7”
- Color: Black
- UPC:
- 613817046576
