WAIT!

Wires, Inputs, & Functions Explained on Your SK58 Package:

Video of K5 Series UPDATED:

Loaded Sub Enclosure Features:

• Rockville Single 8" K5 800w Car Subwoofer Pre-loaded In Vented Sub Enclosure
  
• Peak Power Handling: 800 Watts
  
• Program Power Handling: 400 Watts
  
• CEA Rated RMS Power Handling: 200 Watts
  
• Final Impedance: 4 Ohm
  
• ¾” MDF enclosure
  
• Bonded stapled and braced
  
• Computer designed vents
  
• Angled at 15 % for perfect bass alignment
  
• High quality aviation grade tweed carpet
  
• Satin Nickel speaker wire push terminals
  
• Enclosure air space is 0.6 Cu Ft per sub
  
• Vent dimensions (inches): 1.25" x 4.75" x 7"
  
• Tuning frequency of enclosure: 37 Hz
  
• 1.5"  4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
  
• The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
  
• 30 Oz High Quality Magnet
  
• Cast Iron  Basket With Black Sanded Finish
  
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
  
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  
• Blue Stitching Cone Reinforcement Ensures Long Life
  
• Polypropylene dust cap
  
• Gold-Plated spring loaded push terminals
  
• Impedance: Single 4-Ohm Voice Coils
  
• Vented Hole on T-yoke Enhances Heat Dissipation
  
• Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight
  
• High BL Magnetic Motor Gap
  
• High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
  
• Cutout Diameter: 7.16 inches
  
• Mounting Depth: 3.54 inches
  
• Frequency Response: 37 Hz - 1.3K kHz
  
• 5mm T-Yoke + 5mm Washer
  
• Sensitivity: 85.7dB
  
• Sealed Enclosure Volume: 0.35 – 0.85 Cubic Feet
  
• Vented/Ported Enclosure Volume: 0.6 – 1.2 Cubic Feet
  
• Weight of enclosure: 23.1 Lbs.
  
• Dimensions of enclosure: 14.25“ x 10.75" x12"
  

Features of Amplifier:

• Rockville dB10 800 Watt/400 Watt RMS Mono Class-D 4-Ohm Amplifier
  
• CEA Compliant Power Rating @ 4 Ohm: 200 Watts x 1 Channel
  
• RMS Power Rating @ 4 Ohm: 400 Watts x 1 Channel
  
• Peak Power Rating @ 4 Ohm: 800 Watts x 1 Channel
  
• High-Speed MOSFET Power Supply
  
• Minimum THD at Rated Power: <0.1%
  
• S / N Ratio: >90dB
  
• Under Voltage Protection: 10V
  
• Over Voltage Protection: 16V
  
• Frequency Response: 15 Hz - 250 Hz
  
• Damping Factor: >60 @ 100Hz
  
• Optical Coupler Class “D” Technology
  
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  
• Low Pass Filter: 50 Hz - 250 Hz
  
• Subsonic Filter: 15 Hz - 55 Hz
  
• Phase Control
  
• Full IC-Controlled Protection Circuitry
  
• Fully Adjustable 12dB Bass Equalizer
  
• Mute and Delay Soft Start System
  
• Status Mode LED Indicator
  
• 25 Amp ATO Fuse
  
• Product Dimensions: (L x W x H) 7.7" x 5.5" x 2.0"
  
• Product Weight: 4.4 Lbs.
  

Features of wire kit:

• Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
  
• (1)  17 High Grade Twisted Pair of 100% Copper RCA Cable
  
• 17 8 Gauge Translucent Blue SuperFlex Power Cables
  
• 17 18 Gauge Blue Remote Cable
  
• 17 16 Gauge Clear Speaker Wire
  
• 3 8 Gauge SuperFlex Ground Wire
  
• Gold Plated AGU Heat Resistant Fuse Holder
  
• 60 Amp AGU Gold Plated Fuse
  
• 7 Split Tube Loom
  
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
  
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
  
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F