Package Includes:

• (1) Audio Technica ATW-3212/C710EE1 3000 Wireless Handheld Microphone+Mic Receiver
• (1) Rockville RPG122K Dual 12" Powered Speakers, Bluetooth+Mic+Speaker Stands+Cables

---

Authorized Audio-Technica Dealer!

What's In the Box:

• ATW-R3210 receiver
• ATW-T3202 handheld transmitter
• ATW-C710 cardioid condenser microphone capsule.

Description of ATW-3212/C710EE1:

Providing easy setup, versatile operation and rock-solid, richly detailed high-fidelity sound, Audio-Technica's fourth-generation 3000 Series wireless systems give users the power and flexibility to operate within the congested UHF spectrum.

With a class-leading 60 MHz tuning range - more than twice that offered by the previous versions - the new 3000 Series systems are available in frequency bands - EE1 (530-590 MHz). Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets users set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference.

This system configuration features an ATW-R3210 receiver along with an ATW-T3202 handheld transmitter and an ATW-C710 interchangeable capsule. The ATW-T3202 comes with an ATW-C710 condenser interchangeable cardioid capsule, and its industry-standard thread allows for the use of Audio-Technica and other compatible capsules. The transmitter features rugged, metal housings and is powered by two AA batteries. Charging terminals on the transmitter work with the ATW-CHG3 and networkable ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries. Antenna power is available for powered antennas and other in-line RF devices. A ground-lift switch helps eliminate audible hum caused by ground loops. The system features balanced and unbalanced audio output jacks.

60 MHz Tuning Range
With a class-leading 60 MHz tuning range - more than twice that offered by the previous versions - the new 3000 Series systems are available in frequency bands - EE1 (530-590 MHz). Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets users set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference.

Backup Frequency
Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered

Interchangeable Cardioid Capsule
The ATW-T3202 comes with an ATW-C510 dynamic interchangeable cardioid capsule, and its industry-standard thread allows for the use of Audio-Technica and other compatible capsules

Multifunction utton
Unique multifunction button on the body-pack transmitter can be used to switch to a backup frequency

Charging Terminals
Charging terminals on each transmitter work with the ATW-CHG3 and networkable ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries

OLED Screens
Transmitters and receivers include OLED screens for optimal readout of key settings and alerts

Features:

• Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in four frequency bands: EE1 (530-590 MHz).
• Unique multifunction button on the handheld transmitter can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
• True Diversity operation reduces dropouts
• Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
• Frequency scan and IR sync functionality for ease of setup
• Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
• Transmitter and receiver include OLED screens for optimal readout of key settings and alerts
• Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules
• Charging terminals on transmitter work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries
• Antenna power available for powered antennas and other in-line RF devices
• Ground-lift switch helps eliminate audible hum caused by ground loops
• Balanced and unbalanced audio output jacks
• ATW-C710 condenser interchangeable cardioid capsule

Specifications:

• Element: Fixed-charge back plate permanently polarized condenser
  
• Polar Pattern: Cardioid
  
• Frequency Response: 80 - 20000 Hz
  
• Impedance: 60 Ohms
  
• Power Requirements: 5 V DC
  
• Battery Type: Two 1.5V AA, not included
  
• Weight: 114 g
  
• Dimensions: 84.4 mm long, 50.0 mm max. diameter
  
• Output Connector: Output Connector
  
• Operating Frequencies: Band DE2: 470.125 to 529.975 MHz
  
• Minimum Frequency Step: 25 kHz
  
• Modulation Mode: FM
  
• Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%), ATW-T3202: ±36 kHz (THD:10%)"
  
• Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%), ATW-T3202: ±36 kHz (THD:10%)"
  
• Simultaneous Use: 40 Channels per band*
  
• Frequency Response: ATW-T3201: 31 Hz to 15500 Hz, ATW-T3202: 25 Hz to 16700 Hz"
  
• Operating Range: 100 m
  
• Dynamic Range: ATW-T3201 Mic input: > 115 dB (A-weighted), typical ATW-T3201 Mic input: > 115 dB (A-weighted), typical, ATW-T3201 Inst input: > 112dB (A-weighted), typical ATW-T3202: > 115 dB (A-weighted), typical"
• Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
  
• Operating Temperature Range: -5 ºC to +45 ºC
  
• Receiving System: True Diversity
  
• Sensitivity: 20 dBuV at 60 dBA S/N ratio (50Ohm termination)
  
• Maximum Output Level: XLR / Balanced: +14 dBV, 6.3 mm (¼"""") / Unbalanced: +8 dBV"
• Antenna Input: BNC-type, 50 Ohm
  
• Power Output: 12 V DC, 160 mA (combined)
  
• Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
  
• Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x H x D)
  
• Weight: 1100 g, without accessories 
  
• Accessories: Included: Two Flexible UHF antennas, AC adapter (country dependent), Rack Mount Adaptors

Includes:

• (2) 12" DJ/PA Speakers (1 active with built-in amplifier and 1 passive powered through the 
  active speaker)
  
• (2) Rugged, Adjustable Tripod Speaker Stands
  
• (1) High-Quality Wired Metal Microphone with Clip
  
• (1) XLR to XLR Cable for Microphone
  
• (1) 19 Ft. 1/4" Cable for Active to Passive Speaker Connection
  
• Power Cable for Active Speaker
  
• Wireless Remote Control
  
• Owner’s Manual and Warranty Card

​

RPG122K:

Description:

The Rockville RPG122K is a premium, all-in-one 12" PA system designed for powerful, high-quality audio in any setting. With 1000 watts of peak power and built with durable, professional-grade components, this system sets itself apart from competitors by offering superior audio and build quality. Perfect for DJs, karaoke, parties, and live performances, the RPG122K delivers everything needed for impressive sound right out of the box.

Superior Components for Professional Sound:

• High-Quality Metal Microphone: Unlike typical plastic mics, we include a rugged, metal-cased microphone that delivers clear, rich vocal sound with the durability needed for frequent use. The mic features a steel mesh grill and an on/off switch for easy control.

• Rugged, Adjustable Tripod Stands: The set includes two sturdy tripod stands constructed from heavy-duty steel, adjustable from 43 to 72 inches. With a weight capacity of 132 lbs, these stands provide stability for your speakers at any height.

Feature-Rich for Flexibility and Expansion:

• TWS - True Wireless Stereo: Link two RPG122K systems wirelessly through Bluetooth, allowing for seamless audio across four speakers without the need for additional cables.
  
• Bluetooth Connectivity: Stream wirelessly with a range of over 100 feet, powered by the latest Bluetooth protocol for smooth, reliable connections with your devices.
• Multiple Playback Options: Choose from USB, SD, FM radio, or connect external devices through RCA and XLR inputs. An XLR output also allows for connecting additional speakers or subwoofers, expanding your setup with ease.

Built-In Mixer and Customizable Sound: The integrated mixer includes two mic/line combo channels and one stereo channel with RCA, XLR, and Bluetooth options, providing versatility for various input sources. Customize sound with separate bass and treble controls and preset EQ curves to match your preferences.

Durable, Portable, and Ready for Any Event: Built from high-impact ABS plastic for durability, the RPG122K is designed to withstand frequent transport and use. Ergonomically placed handles make carrying easy, and the included tripod stands provide optimal sound elevation for wide sound dispersion.

For DJs, live events, and gatherings, the RPG122K offers professional-grade performance, delivering quality and features beyond the typical PA system.

Specifications:

• 1000 Watts Peak Power / 250 Watts RMS / 500 Watts Program Power
  
• Built-In USB and SD Playback
  
• LCD Display for Easy Bluetooth and MP3 Navigation
  
• 12" Long-Throw Woofer for Deep Bass and Piezo Compression Horn Tweeter for Crystal-Clear Highs
  
• Wireless Remote Control for Convenient Adjustments
  
• Frequency Response: 60Hz to 20kHz
  
• Sensitivity: 94 dB +/-2 dB
  
• Sturdy ABS Cabinet with Clip LED Indicator