- (1) Audio Technica ATW-1101/G System 10 Digital Wireless Guitar/Bass/Inst System
- (1) Audio Technica ATM410 Dynamic Cardioid Microphone
Authorized Audio-Technica Dealer!
Description of ATW-1101/G:
Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
AT-GcW Guitar Input Cable
1/4" phone plug to locking 4-pin connector for use between instrument and A-T UniPak® body-pack wireless transmitters. 36" (0.9 m) cable.
Features:
- ATW-1101/G System 10 Digital Wireless System For Guitar/Bass/Instruments
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- 2.4 GHz range – completely free from TV interference
- Three levels of diversity assurance: frequency, time, & space
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and set-up
- State-of-the-art digital receiver for reliable performance
- Balanced XLR and unbalanced 1/4” output jacks with level control
What's Included:
(1) ATW-R1100 Receiver
(1) ATW-T1001 UniPak® transmitter
(1) AT-GcW guitar/instrument input cable.
General System Details:
- Operating Frequencies 2.4 GHz ISM band
- Dynamic Range >109 dB (A-weighted), typical
- Total Harmonic Distortion <0.05% typical
- Operating Range 30 m (100') typical
- Open range environment with no interfering signals
- Operating Temperature Range 0° C to +40° C (32° F to 104° F)
- Battery performance may be reduced at very low temperatures
- Frequency Response 20 Hz to 20 kHz
- Depending on microphone type
Receiver Details:
- Receiving System Diversity (frequency/time/space)
- Maximum Output Level XLR, balanced: 0 dBV
- 1/4" (6.3 mm), unbalanced: +6 dBV
- Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
- Dimensions 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
- Net Weight 290 grams (10.2 oz)
- Accessory Included Power supply
Body Pack Transmitter Details:
- RF Power Output 10 mW
- Spurious Emissions Following federal and national regulations
- Input Connections Four-pin Locking Connector
- Pin 1: GND, Pin 2: INST INPUT,
- Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
- Batteries Two 1.5V AA not included
- Battery Life >7 hours (alkaline)
- Depending on battery type and use pattern
- Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
- Net Weight 100 grams (3.5 oz) without batteries
Free AT8470 QuietFlex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch.
Description of ATM410:
This cardioids dynamic workhorse is designed for smooth, natural vocal reproduction and low noise. Equipped with a neodymium magnet for high output, and a multi-stage grille design for excellent protection against plosives, this super-durable microphone is built to stand up to life on the road. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback.
Features:
- Tailored for smooth, natural vocal reproduction
- Cardioids polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Durable performance for professional applications
- Hi-ENERGY® neodymium magnet for improved output and transient response
- Excellent off-axis rejection for minimum feedback
- Superior anti-shock engineering for low handling noise
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal design and construction for years of trouble-free use
Specifications
- ELEMENT: Dynamic
- POLAR PATTERN: Cardioids
- FREQUENCY RESPONSE: 90-16,000 Hz
- OPEN CIRCUIT SENSITIVITY: –55 dB (1.7 mV) re 1V at 1 Pa
- IMPEDANCE: 300 ohms
- WEIGHT: 233 g (8.2 oz)
- DIMENSIONS: 170.0 mm (6.69") long, 53.5 mm (2.11") diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE: T6< /li>
- UPC:
- 613815642374
