- (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
- (1) Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp
- (1) Rockville RockShield 1 Studio Microphone Isolation Shield w/Sound Dampening Foam
Authorized Audio Technica Dealer!
Description of AT2050:
The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.
Features:
- Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
- Element: Externally-polarized (DC bias) condenser
- Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
- Frequency Response: 20 Hz - 20 kHz
- Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
- Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
- Impedance: 120 Ohms
- Maximum Input Sound Level:
- 149 dB SPL, 1 kHz at 1% T.H.D.;
- 159 dB SPL, with 10 dB pad (nominal)
- Noise: 17 dB SPL
- Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4.7 mA typical
- Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
- Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
- Switchable 80 Hz High-Pass Filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Includes: Shock Mount & Protective Pouch
- Product Weight: 0.91 Lbs.
- Product Dimensions: 6.69" inches Long, 2.05" inches Maximum Body Diameter
How to Set Up DMS40:
Video of DMS40:
The Rockville DMS40 desktop microphone boom arm is the perfect accessory for any podcast, home studio setup, or broadcasting studio. Its rotating design provides a maximum arm reach of 40" giving you freedom to place your mic anywhere you want!
Our designers used the most sturdy and long lasting clamps and springs, with durable steel construction.
Features:
- Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm
- Articulating microphone boom arm
- Suitable for studios, broadcasting, podcasting, and more
- Arms: 20"+20" arm length for adjustment
- C-shape desk clamp is made of aluminum alloy
- Fits any desk less than 2 inch thick
- ABS plastic mic clip
- You can set the base of the stand on the desk firmly and adjust to your favorite position
- High quality steel frame is sturdy and durable
- Internal springs for silent and effortless positioning
What's In The Box:
- 3 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter and 3/8” Mic Adapter
- All metal Tripod Desktop mic attachment
How to Set Up Your RockShield 1:
Video of RockShield 1:
Description:
Rockville’s RockShield 1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 1.5-inch-thick high density acoustic foam, the RockShield1 keeps unwanted outside audio waves and vibrations from affecting your recording. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, while room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a counter top or tabletop. Easy installation and studio quality performance will quickly make the RockShield 1 your go-to sound dampening isolation shield.
Features:
- Rockville RockShield 1 Studio Microphone IsolationShield with Sound Dampening Foam
- Number of Panels: 3 Pieces
- Dimensions Each Panel: 8.2'' x 4.5'' inches
- Dimensions Assembled Unit: 11'' x 4.3” x 16.3” inches
- Keeps Excessive Room ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- 1.5" Thick High Density Pyramid Acoustic Foam
- Front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand Mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8” Die-Cast Metal Threads
- Mic Stand with 5/8” Adapter
- The shield frames are made of high strength die cast aluminum
- Net plates are made of high grade steel
- Net Weight (Without Tripod Stand): 1.1 lbs
- Net Weight (With Tripod Stand): 2.0 lbs
- UPC:
- 613815834168
