Package Includes:

• (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
• (1) Rockville RG30 ROGAN STAND 30" Pro Boom Arm Mic Stand w/ Fixed Mount+Desk Stand

---

Authorized Audio Technica Dealer!

Description:

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
• Element: Externally-polarized (DC bias) condenser
• Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
• Frequency Response: 20 Hz - 20 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level:
  • 149 dB SPL, 1 kHz at 1% T.H.D.;
  • 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7 mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
• Switchable 80 Hz High-Pass Filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Includes: Shock Mount & Protective Pouch
• Product Weight: 0.91 Lbs.
• Product Dimensions: 6.69" inches Long, 2.05" inches Maximum Body Diameter

---

All About Your RG30:

How To Set Up Your RG30:

How To Set Up Your a Dynamic and Condenser Microphone to your RG30:

How To Set Up a Smartphone or Tablet to your RG30:

What's in the Box:

• Boom arm stand
  
• Allen key
  
• 2" long M8 screw (for desk surface-mounting)
  
• 4" long M8 screw (for desk surface-mounting thicker desks)
  
• C-Clamp for desk clamping
  
• Fixed mounting plate to mount it into your desk (comes pre-instal to the C-clamp, see our video for how to install)
  
• Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand
  
• Mic clip
  

Description:

Why is this better than others ?

• Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk. But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk.
  
• We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it.
  
• Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place.
  
• The look of this is very professional and clean. There are no springs or other eye-sores.
  
• Our boom arm completely folds in half if you need to travel with it.
  
• We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality.
  
• We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk.
  

Features:

• Rockville RG30 ROGAN STAND 30” Inch Pro Boom Arm Mic Stand
  
• Includes XLR cable built into the stand that is hidden inside the stand for a clean look
  
• Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism
  
• Easily Mounts to the top of a desk (See our install video)
  
• Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3" inches thick)
  
• This is made out of aluminum which is rust-free and lighter weight
  
• Arm length: 14" + 14"
  
• Position is completely adjustable
  
• Firmly stays in place once you adjust it
  
• There is a safety locking pin for the arm to lock in place (other similar stands do not have this)
  
• Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this)
  
• Standard 5/8" Mic Threads for Connecting Most Podcast and Vocal Microphones
  
• Suitable for studios, broadcasting, podcasting, and more